Chevrolet Master Engine Rebuild Kits

Chevrolet Master Engine Rebuild Kits

RPM - RON'S PRECISION MACHINE, INC.
3461 W. 250 N.
Hurricane, Utah 84737
1-435-673-0724 e-mail

Home – Engine Rebuild – Engine Kits – Crankshafts – Balancing & Blueprinting – Price Engine Kits & Parts-Catalog – Engine Start-up – Degree Cam – Cylinder Heads – Other Related Web Sites – About the owner of RPM – Frequently Asked Questions – Purchase Information
Don't forget to bookmark this site.
Hours: 9:00 AM to 5:00 PM Monday - Friday M/T (Utah)
We only accept credit cards with a U.S. billing address
We can also ship to most countries for these kits. Wire transfer required for purchase, $30.00 fee

Parts included in these master engine rebuild kits are: Pistons, rings, main and rod bearings, thrust washers (if applicable), jack shaft bearings (if applicable), cam bearings (if applicable), camshaft(s), lifters (if applicable), freeze plugs, gasket set, complete timing kit, and oil pump. (Most kits are complete, call for parts in the kit)
You can also purchase re-ring kits, crankshaft kits, cam kits, engine kits (EK - kit is a master kit, less camshaft, lifters and timing set), rod and main bearing kit, and a master kit-delete pistons. (MK - master engine kit is a master engine rebuild kit)

Chevrolet Car & Truck Master Engine Rebuild kits - Just fill out the Order Form or e-mail.
These prices are current. Call toll free to purchase kits or parts at: 1-866-700-5877
Click on approx. size of engine, then arrow down to your engine and year to see part numbers & prices.

4-Cylinder/1.0L to 2.5L 6-Cylinder/2.8L to 4.3L 8-Cylinder/265 c.i. to 454 c.i.
Part # Your Cost

1.0L 1985-00 61 cu. in. Geo, Sprint, Firefly 3-cyl.
specity year & # of ring grooves
- 1.0L/61 cu. in. 6-valve
  OHC 3 master engine kit CH61MK $526.60 (non-turbo) (no freeze plugs)
- OHC 3 engine kit CH61EK $254.92
1.5L 1985-89 Spectrum 4XC1 4-cyl.
Isuzu Imark (non-turbo)
- 1.5L/92 SOHC 4 master engine kit CH92MK $487.89
- 1.5L/92 SOHC 4 engine kit CH92EK $339.25
1.6L 1985-88 Nova 4-cyl.
w/Toyota 4ALC engine (exc. 16-valve)
valve cover gasket not included
- 1.6L/98 c.i. SOHC 4 master engine kit CH98MK $532.85
- 1.6L/98 c.i. SOHC 4 engine kit CH98EK $306.40
1.8L 110 cu. in. 1976-81 Pickup (Luv) Ser. 5-11
- 1.8L/110 c.i. SOHC 4 master engine kit CH110LMK $475.64
- 1.8L/110 c.i. SOHC 4 engine kit CH110LEK $342.88
1.8L 112 cu. in. 1982 Passenger car 1982 112 cu. in.
(passenger car non-O.H.C. - "G" engine)
- 1.8L/112 c.i. OHV 4 master engine kit CH112MK $506.71
- 1.8L/112 c.i. OHV 4 engine kit CH112EK $379.16
1.8L Diesel Chevette 1986
The re-ring kit includes: rings, main bearings, rod
bearings, and gasket set.
- 1.8L Diesel 1986 & other years re-ring kit Custom kit $334.04
2.0L 119 cu. in. 1982-85 S10, S15 Truck
specify year
- 2.0L/121 c.i. SOHC 4 master engine kit CH119MK $567.68
- 2.0L/121 c.i. SOHC 4 engine kit CH119EK $399.07
2.0L 121 cu. in. 1983-84 'J' Cars, S-10 Truck
"J Car" Type B, P, Y specify year
- 2.0L/121 c.i. OHV 4 master engine kit CH121MK $495.36
- 2.0L/121 c.i. OHV 4 engine kit CH121EK $368.21
2.0L 1985-86 'J' Cars, Truck
"J Car" Type B, P, Y
- 2.0L/121 c.i. OHV 4 master engine kit CH121LMK $467.64
- 2.0L/121 c.i. OHV 4 engine kit CH121LEK $343.59
2.0L 1987-89 Car 1987-89 Vin '1'
(Buick, Chevrolet, Oldsmobile)
- 2.0L/121 c.i. OHV 4 master engine kit CH121LLMK $507.40
- 2.0L/121 c.i. OHV 4 engine kit CH121LLEK $379.27

Part # Your Cost

2.2L 1981-87 Chevy LUV Truck Diesel
- 2.2L Diesel custom engine kit Custom kit $741.00
  This kit includes: rings, main bearings, rod bearings,
  cam bearings, gasket set, timing belt & tensioner,
  and oil pump. (No pistons, camshat, lifters or freeze plugs).
2.2L 1990-93 Chevy engine Car & Truck
M.F.I. & T.B.I. (intake gasket Pass. '92-'93 not included)
- 2.2L/133 c.i. OHV 4 master engine kit CH133MK $519.16
- 2.2L/133 c.i. OHV 4 engine kit CH133EK $389.42
2.2L 1994-97 Car & Truck
(camshaft & lifters not included)
lifters are available separately
- 2.2L/133 c.i. OHV 4 master engine kit CH133LMK $392.91
2.2L 1998-2003 Car & Truck Vin 4
camshaft & liters not included, lifters are available
- 2.2L/133 c.i. OHV 4 master engine kit CH133LLMK $475.65
2.3L 1987-92 Car - Olds. engine Quad 4
(Quad-4 VIN A, D; DOHC 4)
- 2.3L/138 c.i. DOHC 4 master engine kit OL138MK $794.95
- 2.3L/138 c.i. DOHC 4 engine kit OL138EK $613.40
2.4L/146cc 1996-99 Quad 4 DOHC 4
(camshafts and lifters not included in kits)
lifters available separately
- 1996-99 - master engine kit OL146MK $870.56
- 1996-99 - engine kit OL146EK $722.14
2.5L 1977-84 Car & Truck (Pontiac engine)
(w/o roller, specify year & w/ or w/o crossflow)
- 2.5L151 c.i. OHV 4 master engine kit PT151MK $420.34
- 2.5L151 c.i. OHV 4 engine kit PT151EK $308.70
2.5L 1985-91 Car & Truck (w/roller -Pont. engine)
(Vin 2, R, U specify year and vin code)
Not included: head bolts, 85-86 VIN 'R' push
rod cover gasket, '87 VIN 'U' w/MT oil pan gasket
Camshaft for 1991-91 not available
- 2.5L/161 c.i. OHV 4 master engine kit PT151LMK $446.64
- 2.5L/161 c.i. OHV 4 engine kit PT151LEK $288.43
2.5L 1962-70 Car & Truck
- 2.5L/153 cu. in. 4-cyl. master engine kit CH153MK $396.44
- 2.5L/153 cu. in. 4-cyl. engine kit CH153EK $275.00

Part # Your Cost

2.8L 1980-84 Car & Truck
- 2.8L/173 cu. in. V6 master engine kit CH173MK $400.23
- 2.8L/173 cu. in. V6 engine kit CH173EK $287.43
2.8L 1985-86 V6 Car & Truck
(Specify w/ or w/o F.I. & Timing/ vin W or not)
(not incl. '85 w/FI, valve cover gasket)
- 2.8L/173 cu. in. V6 master engine kit CH173LMK $415.26
- 2.8L/173 cu. in. V6 engine kit CH173LEK $298.58
2.8L 1987-93 V6 Car & Truck
(exc. Vin 'W' MFI), Specify Vin Code &
body type - intake or exhaust gaskets not included)
- 2.8L/173 cu. in. V6 master engine kit CH173LLMK $469.38
- 2.8L/173 cu. in. V6 engine kit CH173LLEK $359.58
2.8L 1987-89 V6 Car & Truck
(Vin 'W' w/MFI) (intake & exhaust
gaskets not included) Fiero gasket set is extra
- 2.8L/173 cu. in. V6 master engine kit CH173LWMK $475.09
- 2.8L/173 cu. in. V6 engine kit CH173LWEK $359.53
3.0L/181 cu. in. 1980-92 4 cyl.
Mercruiser Marine & Industrial
(specify rod bearings - small J. or large J.)
(does not include intake manifold gasket)
Flat top pistons are available but extra
- 3.0L/181 cu.in. OHV 4 master engine kit CH181MK $489.70
- 3.0L/181 cu.in. OHV 4 engine kit CH181EK $370.79
3.1L 1988-94 V6 Car (Except Vin 'M')
does not include intake & exhaust manifold gaskets
- 3.1L/189 cu. in. V6 master engine kit CH189MK $528.86 (alum. & C.I. heads)
- 3.1L/189 cu. in. V6 engine kit CH189EK $406.02
3.1L 1994-99 V6 Vin M (alum. heads)
- 3.1L/189 cu. in. V6 master engine kit CH189MMK $613.99 (no camshaft or lifters in kit)
- 3.1L/189 cu. in. V6 re-ring kit CH189MRRP $348.22
  (includes: moly rings, main & rod bearings & gasket set)
3.1L 1999-04 V6 VIN 'J' Car & Truck
does not include: camshaft or lifters
- 3.1L/189 cu. in. V6 master engine kit CH189LMK $663.35
194 cu. in. 1962-67 L6 Car & Truck
- 3.2L 194 cu. in. L6 master engine kit CH194MK $518.98
- 3.2L 194 cu. in. L6 engine kit CH194EK $399.23
3.3L 1978-79 V6 Car
- 3.3L/200 cu. in. V6 master engine kit CH200MK $474.99
- 3.3L/200 cu. in. V6 engine kit CH200EK $367.38
3.4L 1993-95 V6 Vin 'S (12-valve)
Does not include head bolts
- 3.4L/207 cu. in. V6 master engine kit CH207MK $690.58
- 3.4L/207 cu. in. V6 engine kit CH207EK $556.69
3.4L 1991-95 V6 Vin 'X' DOHC
Camshaft & lifters not available, not in kit
Does not include: belt sprockets & belt tensioners
- 3.4L/207 cu. in. V6 master engine kit CH207LMK $791.88 (no camshaft or lifters in kit N/A)
3.4L 1996-97 V6 Vin 'X' DOHC
Camshaft & lifters not available, not in kit
Does not include: belt sprockets & belt tensioners
- 3.4L/207 cu. in. V6 master engine kit CH207LLMK $934.08 (no camshaft or lifters in kit N/A)
3.4L 1996-2005 V6 Vin 'E' Car & Truck
cam & lifters not in kit, lifters available separately
- 3.4L/207 cu. in. V6 master engine kit CH207TMK $647.14
216 cu. in. 1948-53 L6 Chevy
- 216 c.i. L6 custom kit $1127.53
  This kit is for the converted bearing inserts. This kit includes: pistons, wrist pins, rings, main bearings, rod bearings, bearing shims, cam bearings, freeze plugs, gasket set, camshaft, lifters, timing kit and oil pump.
3.8L 1980-84 V6 Car (Chevy engine)
- 3.8L/229 c.i. V6 master engine kit CH229MK $380.02
- 3.8L/229 c.i. V6 engine kit CH229EK $274.95
230 cu. in. 1963-70 L6 Car & Truck
- 3.8L 230 c.i. L6 master engine kit CH230MK $410.19
- 3.8L 230 c.i. L6 engine kit CH230EK $293.85
3.8L 1977-85 V6 Buick Engine
- 3.8L/231 c.i. V6 master engine kit BU231EMK $328.29
- 3.8L/231 c.i. V6 engine kit BU231EEK $250.59
3.8L 1988-95 V6 Vin 'C' (MFI) Vin 'L' (TPI) (Buick engine)
Does not include balance shaft bearing or bushing
- 3.8L/231 c.i. master engine kit BU231ECLMK $897.57
- 3.8L/231 c.i. engine kit BU231ECLEK $530.53
3.8L 1994-98 V6 Vin 'K' (Buick engine)
w/1st design intake - specify FWD or RWD
Does not include balance shaft bearing or bushing
- 3.8L/231 c.i. V6 master engine kit BU231EKLMK $1140.92
- 3.8L/231 c.i. V6 engine kit BU231EKLEK $654.07
3.8L 1986-88 V6 Buick Engine
even fire non turbo specity RWD or RWD & Vin Code
(8th digit), intake gasket not included, 1988 camshaft N/A
- 3.8L/231 c.i. V6 master engine kit BU231ELMK $394.55
- 3.8L/231 c.i. V6 engine kit BU231ELEK $282.39
3.8L 1979-87 V6 Buick Engine Turbo
Vin 7 & 9, specify # of oil pan bolts and Vin code (8th digit)
Does not include: intake manifold gasket or
turbo mounting gasket
- 3.8L/231 c.i. V6 master engine kit BU231ETMK $584.29
- 3.8L/231 c.i. V6 engine kit BU231ETEK $472.91
235 cu. in. 1948-53 L6 Car & Truck
specify (year, car or truck, mains, cam & lifters)
shim pack not included for bearings
- 235 c.i. L6 master engine kit CH235MK $932.03
- 235 c.i. L6 engine kit CH235EK $638.90
235 cu. in. 1954-62 L6 Car & Truck
specify (year, car or truck, mains, cam & lifters)
shim pack not included for bearings
- 235 c.i. L6 master engine kit CH235LMK $782.12
- 235 c.i. L6 engine kit CH235LEK $530.60
250 cu. in./4.1L 1966-84 L6 Car & Truck
specify (year, gaskets, integrated or non-int. head)
- 4.1L/250 cu. in. L6 master engine kit CH250MK $376.92
- 4.1L/250 cu. in. L6 engine kit CH250EK $262.81
4.3L 1985-86 Car & Truck
not included: 1985 oil pan gasket & rear seal
- 4.3L/262 c.i. V-6 master engine kit CH262MK $372.80
- 4.3L/262 c.i. V-6 engine kit CH262EK $259.47
4.3L 1987-90 Car & Truck (roller cam)
- 4.3L/262 c.i. V6 master engine kit CH262LMK $536.06
- 4.3L/262 c.i. V6 engine kit CH262LEK $271.16
4.3L 1990-92 Truck (roller cam & TBI)
Vin B, Z
- 4.3L/262 c.i. V6 master engine kit CH262LTMK $632.23
- 4.3L/262 c.i. V6 engine kit CH262LTEK $378.05
4.3L 1993-94 Truck Vin Z w/ & w/o balance shaft
- 4.3L/262 c.i. V6 master engine kit CH262LZMK $570.66
- 4.3L/262 c.i. V6 engine kit CH262LZEK $286.48
4.3L 1992-95 Car & Truck
Vin 'W' Vortec w/balance shaft
- 4.3L/262 c.i. V-6 master engine kit CH262LLWMK $734.28
- 4.3L/262 c.i. V-6 engine kit CH262LLWEK $415.75
4.3L 1996-02 Vortex w/balance shaft
Vin 'W' & 'X' lifters are available separately
Not included: balance shaft gears, bal. shaft bearing
or bushing, plastic timing cover gasket, or head bolts.
- 4.3L/262 c.i. V6 master engine kit CH262LXMK $570.33 (no cam or lifters in kit)

Part # Your Cost

265 cu. in. V-8 1955-57 Car & Truck
('57 does not include rear seal)
- master engine kit - Car & Truck CH265MK $707.60
- engine kit CH265EK $555.78
4.3L/265 cu. in. V8 1994-96
- no cam or lifters in kits
- master engine kit - Vin 'W' Impala CH265LMK $491.55
- engine kit CH265LEK $384.12
267 cu. in. 4.4L V-8 1979-82
specify year
- master engine kit - Car CH267MK $536.85 - (specify year)
- engine kit CH267EK $440.21
283 cu. in. V-8 1957-67
(not incl. (57/58) rear seal)
- master engine kit - Car & Truck CH283MK $433.70
- engine kit CH283EK $340.42
4.8L/292 cu. in. 1963-84 L6
(not incl. (63-67) rear seal)
not included: '79 oil pan gasket
- master engine kit - Truck CH292MK $452.82
- engine kit CH282EK $323.40
4.8L/292 cu. in. 1985-89 L6
(not included (85-89) positive control valve seals)
- master engine kit - Truck CH292LMK $454.96
- engine kit CH292LEK $325.28
4.8L/293 cu. in. 1999-02 Truck V-8
Vortic V-8 Truck Vin 'V'
does not include: camshaft or lifters or freeze plugs
head set for 2002 up N/A
lifters are available separately
- master engine kit - Truck CH293MK $966.14
5.0L/305 cu. in. V-8 1976-86
(does not include intake gasket for F.I.)
does not include: 1986 oil pan gasket & rear seal
- master engine kit - Car & Light Truck CH305MK $345.54 (exc. Vin 'G' H/O) specify year
- engine kit CH305EK $346.37
5.0L/305 cu. in. V-8 1982-86
(does not include intake gasket with F.I.)
- master engine kit - Car & Truck CH305HOMK $395.48 - High Output Vin 'H', 'F')
- engine kit CH305HOEK $296.67
5.0L/305 cu. in. V-8 1987-93
(specify year & cam, w/auto or manual trans.)
specify Vin code (8th digit)
- master engine kit - Car w/roller cam CH305LRMK $676.16
- engine kit - CH305LREK $337.74
5.0L/305 cu. in. V8 1987-95
- master engine kit - Lt. Truck CH305TMK $436.37
- engine kit CH305TEK $336.55
5.0L/305 cu. in. V8 1996-00 Vortec (roller cam)
Plastic timing cover gasket not included
- master engine kit - Vin 'M' CH305MMK $893.87
- engine kit - VIN 'M' CH305MEK $567.87
307 cu. in. V-8 1968-73
- master engine kit - Car & Truck CH307MK $395.19
- engine kit CH307EK $305.74
307 c.i. 1985-90 Olds. Engine VIN 'Y'
Intake gasket not included or exhaust gasket
w/1-9/16" x 2-1/8" end ports
- 5.0L/307 cu. in. V8 master engine kit OL307LMK $792.94
- 5.0L/307 cu. in. V8 engine kit OL307LEK $407.65
5.3L/325 cu. in. 1999-02 Truck V8
Vin 'T', 'Z' - freeze plusgs, camshaft N/A
lifters are available separately - not in kit
- master engine rebuild kit CH325MK $1013.08
327 cu. in. 5.4L V-8 1962-69
note: small journal or large journal
not included: oil pump for 64-67 Chevy II
w/shallow oil pan
- master engine kit - Car - (exc. HP) CH327MK $401.53
- engine kit CH327EK $306.42
327 cu. in. 5.4L 1962-68 V8
- master engine kit - Truck CH327TMK $536.35
- engine kit CH327TEK $442.18
346 cu. in. 5.7L 1997-04 Car V8 LS1
aluminum block Vortec V-8
freeze plugs not included
camshaft for Camaro only 97-02
- master engine kit CH346MK $1470.01
- engine kit CH346EK $969.96
350 cu in./5.7 Liter V-8 1967-86 car
specify year, gaskets, pistons (flat top or dish)
- master engine kit - Car exc. H.P. CH350MK $292.03
- engine kit CH350EK $208.76
- master engine kit - 1986 CH350MK-1 $358.23 (1986 1-Piece rear seal /non-roller)
350 cu. in./5.7L V-8 1986 Corvette L98
w/aluminum heads
- re-ring kit - Custom kit $278.58 (w/moly rings - shallow oil rings)
  This kit includes: rings, main bearings, rod bearings, & gasket set (1-piece rear seal).
350 cu in./5.7 Liter V-8 1968-86 Truck
40, 50, 60 Series
- master engine kit - Truck CH350TMK $339.18 (68-85)
- engine kit CH350TEK $246.84 (68-85)
- master engine kit - Truck CH350TMK-1 $402.08 (1986 - 1-piece rear seal)
350 cu. in./5.7 Liter V-8 1987-93 car
- master engine kit CH350LMK $626.87 (Roller Camshaft)
- engine kit CH350LEK $310.21
350 cu. in. 1987-95 L.D. Truck
(incuding Vin 'K' with TBI & EFI)
- 5.7L/350 c.i. V8 master engine kit CH350LTMK $407.54
- 5.7L/350 c.i. V8 engine kit CH350LTEK $309.64
350 cu. in./5.7 Liter V-8 1990-92 Vin 7
hyd. roller camshaft & lifters
- master engine kit CH350LLMK $634.12 (Vin 7 Roller-Police)
- engine kit CH350LLEK $297.66
350 c.i. 1992-97 Vin 'P' (camshaft not included)
LT-1 corvette, Camaro & Police Vin P - roller
Camshaft & lifters not included - lifters are available
- 5.7L/350 c.i. V8 master engine kit CH350LPMK $554.26
- 5.7L/350 c.i. V8 engine kit CH350LPEK $390.88
350 c.i. 1996-02 Truck Vin R - Vortec
specify .4/.41 or .275/.285 tooth width timing
- 5.7L/350 c.i. V8 master engine kit CH350TLMK $1013.92
- 5.7L/350 c.i. V8 engine kit CH350TLEK $614.67
364 cu. in. 6.0L 1999-02 Truck V8
Vortec Truck (head set for 2002 up N/A)
does not include camshaft or lifters or freeze plugs
lifters are available separately
- master engine kit CH364MK $950.53
366 c.i. 1966-85 Truck
(exc. LPG & gear drive)
not included: 1985 w/H5D emissions, valve cover gasket
- 6.0L/366 c.i. V8 master engine kit CH366MK $627.58
- 6.0L/366 c.i. V8 engine kit CH366EK $502.51
366 c.i. 1986-90 Late Truck w/o gear drive
- 6.0L/366 c.i. V8 master engine kit CH366LMK $663.59
- 6.0L/366 c.i. V8 engine kit CH366LEK $539.92
366 c.i. 1991-98 Truck
- 6.0L/366 c.i. V8 master engine kit CH366LLMK $814.61
- 6.0L/366 c.i. V8 engine kit CH366LLEK $662.85
6.2L 1982-93 Diesel Engine
intake gasket not included
- 6.2L/378 c.i. V8 master engine kit CH378MK $1322.93
- " engine kit CH378EK $904.62
6.5L 1992-02 Diesel Engine
not included: head bolts, turbo upper gasket set,
or positive exh. seals (but available separately)
- 6.5L/395 c.i. V8 master engine kit CH395MK $1577.58
- " CH385EK $1183.32
396 cu. in. 6.5L V-8 1965-69 (exc. H.P.)
Specify car or truck. Camshaft is late (1967-69) grind, and
for 1965-66, a groove 3/16" wide x 7/64" deep must be
machined in rear cam journal (centered).
- master engine kit - Car & Truck CH396MK $617.83
- engine kit CH396EK $512.56
400 c.i. V-8 small block 1970-76
- master engine kit - Car (exc. H.P.) CH400SBMK $456.76
- engine kit CH400SBEK $364.63
402 cu. in. V-8 big block 1970-72 (exc. H.P.)
- master engine kit - Car & Truck CH402MK $657.82
- engine kit CH402EK $546.58
427 cu. in. V-8 1966-69 (exc. H.P.)
- master engine kit - Car CH427MK $710.78
- engine kit CH427EK $599.52
427 c.i. 1969-90 Truck (exc. gear drive)
Secify L.D. or M. Duty or H. Duty
- 7.0L/427 c.i. V8 master engine kit CH427TMK $833.19
- 7.0L/427 c.i. V8 engine kit CH427TEK $713.08
427 c.i. 1991-96 Truck (Mark V block)
Conversion gasket set for '96 up not available
- 7.0L/427 c.i. V8 master engine kit CH427TLMK $951.27
- 7.0L/427 c.i. V8 engine kit CH427TLEK $822.74
454 c.i. 1971-90 Car & Truck (exc. H.P.)
- 7.4L/454 c.i. V8 master engine kit CH454MK $599.75 (non-roller)
- 7.4L/454 c.i. V8 engine kit CH454EK $494.92
454 c.i. 1991-94 Light Truck
- 7.4L/454 c.i. V8 master engine kit CH454LTMK $695.90
- 7.4L/454 c.i. V8 engine kit CH454LTEK $571.47
454 c.i. 1995-99 Truck (Vin "N") non-roller
- 7.4L/454 c.i. V8 master engine kit CH454LLTMK $823.83
- 7.4L/454 c.i. V8 engine kit CH454LLTEK $672.16
454 c.i. 1996-2001 Truck (Vin 'J') w/roller cam
- 7.4L/454 c.i. V8 master engine kit CH454LRTMK $1163.45
- 7.4L/454 c.i. V8 engine kit CH454LRTEK $679.42
496 c.i./8.1L 2001-04 Truck VIN 'G' Vortec
- 8.1L V-8 master engine kit CH496TMK $1068.84
  camshaft, freeze plugs, lifters not included
  Lifters are available separately
502 c.i. 8.2L V-8 Marine w/roller cam, with K/B pistons
Flat top or domed pistons in the kit
- master engine kit CH502MK $1230.14
  does not include: camshaft or lifters
  Lifters are available separately
  Pistons are available in .004", .034", .064", .100" and .134" over bore.

(top of page)

HOME