PRW Racing Engine Test Stand -
Aluminum Radiators - Water Pumps - Parts

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877
Contact us anytime
24-7
Hours 9-5 Monday-Friday Mtn. Time
Order Form

Engine Rebuild Kit and Parts Online Catalog

Engine Rebuild & Assembly Balancing & 
Blueprinting
Cylinder Heads
Engine Rebuild Kits Engine Start-up Other Related Web Sites Page 1
Crankshafts Degree Cam Other Related Web Sites Page 2
Purchase warranty & Return Information About the owner of RPM Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

Home

 





Racing Engine Test Stand
The U.S. Patented (US 7,810,799 B2) PRW Racing Engine Test Stand is the first U.S. Patent collapsible design that is manufactured with standard parts and readily available replacement parts from the manufacturer. For the small shop or race trailer, the ETS is a real space-saver when collapsed. It is available as a base unit for the do-it-yourselfer, or accessorized with a radiator, electric fan, fuel cell, pre-drilled instrument panel, on-off switches, momentary starter switch, oil pressure gauge, water temperature gauge and 0-8000 RPM tachometer. The Low-Profile ETS is designed to accommodate most engines, and built to meet the demands of high-output racing engines and heavier big blocks, taking mobile engine test stands to a whole new level of functionality.

The Engine Test Stand is also available with a Short Block Adapter (P/N 1300503) that allows the mechanic to build the short block, and then rotate the engine to the upright position, just like a typical engine stand. Then temporarily support the short block and install the center supports, remove the rotating head unit, and re-attach the rear engine supports to finish the engine assembly. After final assembly, install the fuel cell, plumb for fuel, wire the electrical, connect the battery, and you are ready to run! Obviously, we have over-simplified the necessary preparation and hard work; but a great deal of satisfaction can be gained with the knowledge that your customer’s engine is ready and worthy to be installed in their hot rod, race car, or street machine!



 


• Find leaks
• Tune engines
• Save on Dyno time
• Showcase your engines
• Customer demonstrations
• Prevent expensive comebacks
• Test new, used or rebuilt engines
• Fully adaptable to most any engine design
• When not in use, simply folds up for easy storage
• Short block adapter allows it be used as a build stand

 

 

 



















Built to handle high-output race engines & heavier big blocks
• Designed to accommodate most engines
• Manufactured with readily-available standard parts
• A real space saver -- U.S. Patent Pendng Collapsible design Complete Engine Test Stand includes:
• Radiator • Instrument panel • Oil pressure gauge
• Electric fan • On-off switches • Water temp gauge
• Fuel cell • Momentary starter switch • 0-8,000 RPM tachometer

 ENGINE TEST STANDS
 Part# __ Your Cost
 Engine Test Stand - Complete 1300111 $2,664.38
 Engine Test Stand (ETS), Racing, Steel, Base Unit, Blue Powder Coat 1300101 $1,851.26
 Engine Test Stand (ETS), Racing, Steel, Base Unit w/ Short Block Adapter, Blue Powder Coat 1300102 $2,055.56
 Engine Test Stand (ETS), Racing, Steel, Base Unit & Full Accessory Kit, Blue Powder Coat 1300111 $2,664.38
 Engine Test Stand (ETS), Racing, Steel, Base Unit w/ Short Block Adapter & Accessory Kit, Blue Powder Coat 1300112 $2,882.61
 Short Block Adapter Kit - Pictured below 1300503 $435.93

ETS = Engine Test Stand












The short block adapter kit converts the test stand to an engine stand & includes:
• Rotating head & mounting flange • Stainless steel adjustable supports (4)
• Lock pin (with chain & retainer) • All mounting fasteners with nuts & washers
• Handle & holder


Rotating Short Block Adapter is Included with PN’s 1300102 $2,055.56 & 1300112.

PN 1300503 $435.93 available as an addon option.

 ENGINE TEST STAND ACCESSORIES
 Part# __ Your Cost
 ETS Instrumental Panel, Red, Pre-Drilled for Instrumentation 1300313 $62.60
 ETS Center Uprights, Engine Support, Short Fixed, Pair, 16.0” 1300322 $106.26
 ETS Center Uprights, Engine Support, Adjustable, Pair, 15.0” to 17.75” 1300323 $114.29
 ETS Center Brackets, Engine Mount, Pair, 1.5” Elev to 3.50” Drop 1300332 $38.48
 ETS Rear Brackets, Adjustable Engine Support, Stainless Steel, Set of 4 1300404 $106.26
 ETS Fuel Cell, Fabricated Aluminum, Includes Fuel Cap 1300500 $200.45
 ETS Rear Adapter, Rotating Short Block Bolt-on Accessory, Complete 1300503 $435.93
 ETS Fuel Cap, Racing Engine Test Stand, Locking 1300517 $48.82
 ETS Switch, On-Off Toggle 1305582 $20.36
 ETS Switch Plate, On-Off Toggle 1308250 $4.97
 ETS Fan, 14” Universal Electric Fan, Includes Mounting Kit 1311014 $94.77
 ETS Overflow Tank, Coolant - 3” X 8”, Stainless Steel 1326071 $60.31
 ETS Gauge, Tachometer, 3 3/8” White, Back Lit, Aluminum Bezel, 0-8000 RPM 1338068 $124.76
 ETS Gauge, Water Temp, Mech, 2 5/8” White, Back-Lit, Aluminum Bezel, 130-280º 1338442 $68.35
 ETS Gauge, Oil Pressure, Mech, 2 5/8” White, Back-Lit, Silver Bezel, 0-100 Lbs 1338444 $54.56
 ETS Switch Guard, On-Off Toggle 1382468 $25.84
 ETS Switch, Momentary Starter 1390030 $18.95

 PN 1300500 $200.45 ETS Fuel Cell

 PN 1311014 $94.77 ETS Electric Fan

Aluminum racing radiators & accessories
















PQx® Aluminum Racing Radiators are the perfect fit for racing, street rod, classic, muscle, exotic or late model cars and trucks. These radiators are available in a variety of sizes for both Ford and GM models. All radiators feature 2 rows of 1” tubes of which are single pass design.
• TIG welded
• Petcock drain included
• All radiators feature 2 rows of 1” tubes
• All aluminum construction for reduced weight
• Multiple threaded mounting bungs for easy installation
• Polished top-lines and end tanks create a super-clean appearance









Polished Side-Saddle Tanks
and Finished Topline






Threaded Front and Side Mounting Bungs








Petcock Drains Standard
ALUMINUM RACING RADIATORS
Application
Part # Your Cost
FORD 19" x 28", Single Pass, Includes Petcock Drain 5411928 $311.71
GM __19" x 25", Single Pass, Includes Petcock Drain 5401925 $291.80
GM __19" x 26", Single Pass, Includes Petcock Drain 5401926 $291.80
GM __19" x 27", Single Pass, Includes Petcock Drain 5401927 $291.80
GM __19" x 28", Single Pass, Includes Petcock Drain 5401928 $291.80
GM __19" x 29", Single Pass, Includes Petcock Drain 5401929 $300.85
GM __19" x 31", Single Pass, Includes Petcock Drain 5401931 $310.79

ALUMINUM RACING RADIATORS WITH MODULAR FITTINGS

Application ------------------------- Part # Your Cost
GM 19" x 25", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5421925 $313.52
GM 19" x 26", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5421926 $275.43
GM 19" x 27", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5421927 $323.47
GM 19" x 28", -20 AN “O” Ring Smooth Hose Adapters, Single Pass,I ncludes Petcock Drain 5421928 $275.43
GM 19" x 29", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5421929 $343.37
GM 19" x 31", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5421931 $355.13
FORD 19" x 26", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5431926 $343.37
FORD 19" x 28", -20 AN “O” Ring Smooth Hose Adapters, Single Pass, Includes Petcock Drain 5431928 $352.42

 

Adapters are available.
Modular bungs and fittings are available separately!
   

RADIATOR ACCESSORIES
RADIATOR FITTING ADAPTER, -20 AN
Straight "O" Ring Union to -20 AN Male
Braided Hose Fitting, Includes Raw Finish
Weld-in Bung
_____________________________Part # Your Cost
Blue Anodized, Inlet/Outlet w/ Bung 5292410 $26.69
Silver Anodized, Inlet/Outlet w/ Bung 5292413 $26.69
Black Anodized, Inlet/Outlet w/ Bung 5292417 $26.69

RADIATOR FITTING ADAPTER, -20 AN
Straight "O" Ring Union to Male Hose
Barb, Includes Raw Finish Weld-in Bung
________________________Part # Your Cost
1.50“ Hose, Silver Anodized 5292323 $25.78
1.50“ Hose, Black Anodized 5292327 $26.69
1.75” Hose, Silver Anodized 5292333 $26.69
1.75” Hose, Black Anodized 5292337 $26.69

Cooling System accessories
 
PN 5234610 $49.31 GM 2008-Up LS Series, Billet Aluminum 90°, all V6/Slant 6/V8, As-Cast Straight Male Hose Barb, (GM LS3, LS7, LS9, LSA, L76, or L92), Machine Polished

 

PN 5244081 $23.94 MOPAR, Cast Aluminum

 


 PN 5292200 $47.39 CHEVY, SB-BB, 90°
Aluminum, As-Cast (Also Available in
Black , PN 5292270 $62.89 )


 WATER NECK OUTLETS  Part #
Your Cost
 GM 2008-Up LS Series, Billet Aluminum Straight Male Hose Barb, (GM LS3, LS7, LS9, LSA, L76, or L92), Machine Polished  5234610 $49.31
 GM LS Series 1997-07, Billet Aluminum Straight Male Hose Barb, (GM LS1, LS2, LS6, & LS7 Pre-2008), Machine Polished  5234613 $49.31
 GM LS Series, Cast Aluminum 90°, (GM 5.7L, 6.0L, 6.2L), As-Cast  5234681 $29.41
 GM LS Series, Cast Aluminum 90°, (GM 5.7L, 6.0L, 6.2L), Polished  5234691 $29.41
 MOPAR Cast Aluminum 90°, All V6/Slant 6/V8, As-Cast  5244081 $23.94
 MOPAR Cast Aluminum 90°, All V6/Slant 6/V8, Polished  5244091 $27.84
 MOPAR Cast Straight Male Hose Barb, All V6/Slant 6/V8, Chrome  5244093 $23.94
 
 WATER NECK OUTLET & THERMOSTAT  Part #
Your Cost
 GM LS Series, Cast Aluminum 90°, (GM 5.7L, 6.0L, 6.2L), As-Cast, Temp 82 °C/180 °F  5234683 $29.41
 GM LS Series, Cast Aluminum 90°, (GM 5.7L, 6.0L, 6.2L), As-Cast,Temp 82 °C/180 °F  5234685 $22.17
 GM LS Series, Cast Aluminum 90°, (GM 5.7L, 6.0L, 6.2L), Polished, Temp 82 °C/180 °F  5234693 $35.74
 
 WATER NECK MANIFOLD FILLERS  Part #
Your Cost
 CHEVY, SB-BB, 90° Aluminum, As-Cast  5292200 $47.39
 CHEVY, SB-BB, 90° Aluminum, Black  5292270 $62.89

HIGH PERFORMANCE ALUMINUM WATER PUMPS

INNOVATION - The act or process of introducing something new. With that in mind, PRW has continued the evolutionary process on our existing line of water pumps. PQx® engineered pumps will flow 35 gallons per minute at 4,000 RPM, with minimal cavitation and proportionally increased flow rates at 5,000 RPM and above.

Equalized water flow distribution and pressure balanced water passages minimize internal engine hot-spots making these pumps an excellent alternative for not only racers, but also trucks, towing, and motorhome applications. Cruisers and hot rodders will appreciate the improved cooling at low speeds and the availability of polished aluminum water pump bodies for nearly every application.


• 0.750” diameter steel shafts
• Aircraft industry tolerances
• A356 aluminum alloy pump bodies
• High flow cast iron CNC machined impellers
• SBC applications include adjustable cam stop
• Back plate O-ring sealed for most applications
• Billet steel hubs and shielded-seal roller ball bearings
All designs include a 3/4” shaft integrated with ball/roller bearings rated at 12,000+ RPM.

 PN-1445404 - CHEVY BB 1965-68 Cars-LDT, Short, As-Cast
|
 PN-1435011 - CHEVY SB 1969-87, Long Style, Polished

 Application
 Style  Pilot Size  Shaft O.D.  Block- to- Hub Height  Rotation  Inlet Size  Finish  Part # _ Your Cost
 AMC/JEEP 304-401, 1973-91 Long  5/8”  3/4”  4.8125”  Standard  1.80”  As-Cast Polished  1440100 $175.99
1440110 
CHEVY SB 1955-72, Cars & Light Duty Trucks, 1969-70 350 Corvettes Short   5/8”  3/4”  5.625”  Standard  1.80”  As-Cast
Polished 
1435000 $189.56
1435010 $298.13
CHEVY SB 1969-87, Cars & 1973-86 Light Duty Trucks Long  5/8”  3/4”  6.9375”  Standard  1.80”  As-Cast
Polished 
1435001 $198.61
1435011 $271.16
CHEVY SB 1955-95, Gen I V8, Hi-Perf/Race, "O" Ring Sealed w/ Thick Cover & Auxiliary Fittings
 
Short  3/4”  3/4”  5.8125”  Standard  1.85” As-Cast
Polished 
Black
1435002 $189.56
1435012 $243.85
1435022 $221.23
CHEVY SB, 1971-82 Corvettes   Short  3/4”  3/4”  5.800”  Standard  1.80”  As-Cast
Polished 
1435003 $189.56
1435013 $298.13
CHEVY 350 1984-91, Corvettes 350 w/ Reverse Rotation  Short  3/4”  3/4”  5.800”  Reverse  1.54”  As-Cast
Polished 
1435004 $198.61
1435014 $325.28
 CHEVY SB 1987-95, V8 & 90° V6 w/ Serpentine Belt Drive Long  5/8”  3/4”  6.9375”  Serpentine
Reverse 
1.80”  As-Cast
Polished 
1435005 $216.70
1435015 $270.99
 CHEVY SB 1955-95, Gen I V8 w/Aftermarket Serpentine Belt Drive Short  5/8”  3/4”  5.625”  Serpentine
Reverse 
1.84”  As-Cast
Polished 
1435006 $203.13
1435016 $289.09
 CHEVY 348/409W, 1958-65 Short  5/8”  3/4”  5.500”  Standard  1.86”  As-Cast
Polished 
1440900 $252.89
1440910 $289.09
 CHEVY BB 1969-87, Cars, Some 1988-'91 HD Trucks w/Mark IV Long  5/8”  3/4”  7.3125”  Standard  1.875”  As-Cast
Polished 
1445401 $225.75
1445411 $280.85
 CHEVY BB 1971-74 Corvettes Short  3/4”  3/4”  5.750”  Standard  1.95”  As-Cast
Polished 
1445402 $243.85
1445412 $298.13
 CHEVY BB 1988-Up Vehicles w/Aftermarket Serpentine Belt Drives Short  5/8”  3/4”  5.750”  Serpentine
Reverse 
2.00”  As-Cast
Polished 
1445403 $180.42
1445413 $334.33
 CHEVY BB 1965-68 Cars, 1966-72 Trucks & 1969-70 BB Corvettes Short  5/8”  3/4”  5.750”  Standard  1.95”  As-Cast
Polished 
1445404 $207.65
1445414 $318.86

FORD HIGH PERFORMANCE ALUMINUM WATER PUMPS
 PN-1439000 FORD FE 352-428, 1965-76, As-Cast

 PN-1428104 FORD 4.6L 1996-01, 2005-10,
Mustang GT & Cobra

 

 Application
 Style  Pilot Size  Shaft O.D.  Block- to- Hub Height  Rotation  Inlet Size  Finish  Part # _ Your Cost
 FORD 4.6L, 1996-01, 2005-10 Mustang GT & Cobra, Cartridge 3/4”  3/4”  3.43”  Standard  As-Cast  1428104 $108.04
 FORD 289/302/351W, 1965-69
w/ Right-Hand Inlet & Backplate
5/8”  3/4”  5.42”  Standard  1.78”  As-Cast
Polished 
1428900 $175.99
1428910 $261.94
 FORD 302 1970-78, 351W 1970-87
w/ Left-Hand Inlet
5/8”  3/4”  5.70"  Standard  1.78”  As-Cast
Polished 
1430200 $207.65
1430210 $283.65
 FORD 5.0L, 1986-93 w/ Serpentine Accessory Belt Drive 5/8”  3/4”  5.75”  Reverse  1.78”  As-Cast
Polished 
1430201 $189.47
1430211 $280.04
 FORD 302/351W, 1970-Up Hi-Perf/Race w/ Left-Hand Inlet & Backplate Competition+ Pump is Excellent for Endurance &
Marine Applications as well.
5/8”  3/4”  5.70”  Standard  1.78”  As-Cast
Polished
Black 
1430202 $189.56
1430212 $283.65
1430222 $198.61
 FORD 351C/M & 400M, 1970-82 w/ Left-Hand Inlet, w/o
Backplate
5/8”  3/4”  5.71”  Standard   1.78”  As-Cast
Polished 
1435100 $185.03
1435110 $298.13
 FORD FE 352-428, 1965-76 (May Fit Earlier Years w/Aftermarket or Later Model Accessory Brackets) 5/8”  3/4”  7.56”  Standard  2.125”  As-Cast
Polished 
1439000 $243.85
1439010 $281.85
 FORD 429/460, Big Block, 1970-92 3/4”   3/4”  5.5”  Standard  1.98”  As-Cast
Polished 
1446000 $225.75
1446010 $352.42

GM HIGH PERFORMANCE ALUMINUM WATER PUMPS

 PN-1434625 - GM LS Gen III//IV (Shown with Black Anodized Pulley - 2634600)

 PN-1434605 - GM, LS Gen III & IV, 1999-06 Truck, & SUV (Sport Utility), 8-Hole Billet Hub, Top Inlet

 Application
Pilot Size   Shaft O.D.  Block- to- Hub Height  Inlet Size Pulley/Pump Combo  Finish  Part # _ Your Cost
 GM LS Gen III & IV 1998-10 Firebird/Camaro “F” Body, 8-Hole Billet Hub,
Front Inlet
5/8”  3/4”  6.10”  1.78”  Black Anodized Pulley
Black Anodized Pulley
Polished Pulley
Polished Pulley 
As-Cast
Polished
As-Cast
Polished 
1434620 $307.18
1434623 $370.52
1434622 $334.33
1434621 $397.66
 GM LS Gen III & IV 1997-04 Corvette/
Avanti II, 8-Hole Billet Hub, Front Inlet
5/8”  3/4”  6.10”  1.78”  Black Anodized Pulley
Black Anodized Pulley
Polished Pulley
Polished Pulley 
As-Cast
Polished
As-Cast
Polished 
1434625 $341.56
1434628 $415.76
1434627 $370.52
1434626 $418.47
 GM LS Gen III & IV 1997-04 Corvette/
Avanti II & 1998-10 Firebird/Camaro “F” Body, 8-Hole Billet Hub, Front Inlet
5/8”  3/4”  6.10”  1.78” 

Water Pump Only (Requires PRW, March Performance or Similar Aftermarket Pulley) 

As-Cast
Polished 
1434600 $271.16
1434610 $380.61
 GM LS Gen III & IV 1998-Up, Truck & SUV (Sport Utility), 8-Hole Billet Hub,
Top Inlet
5/8”  3/4”  6.10”  1.78”  Black Anodized Pulley
Black Anodized Pulley
Polished Pulley
Polished Pulley 
As-Cast
Polished
As-Cast
Polished 
1434630 $369.61
1434633 $442.90
1434632 $397.66
1434631 $451.95
 GM, LS Gen III & IV, 1999-06 Truck, & SUV (Sport Utility), 8-Hole Billet Hub,
Top Inlet
5/8”  3/4”  6.10”  1.78”  Water Pump Only (Requires PRW, March Performance or Similar Aftermarket Pulley)  As-Cast
Polished 
1434605 $271.16
1434615 $380.61

WATER PUMP PULLEYS
• Chrome or Black finish
• CNC machined from billet steel
• Also fits Edelbrock pump PN #8896 & cartridge PN #8897

 Application  Pilot Size  Shaft O.D.  Finish  Part # _ Your Cost
 GM LS Gen III/IV Series, Firebird, Camaro, GM Sport Trucks, SUV, & Utility Vans for 4 Hole Aftermarket Hub, Billet Steel, 57mm Deep 5/8”  3/4”  Black Powdercoat
Chrome 
2634667 $135.27
2634669 $135.27
 GM LS Gen III/IV Series, Corvette & Avanti II for 4 Hole Aftermarket Hub, Billet Steel, 88mm Deep 5/8”  3/4”  Black Powdercoat
Chrome 
2634657 $144.32
2634659 $120.68

MOPAR HIGH PERFORMANCE ALUMINUM WATER PUMPS



 Application Pilot Size   Shaft O.D.  Block- to- Hub Height  Inlet Size Pulley/Pump Combo  Finish  Part # _ Your Cost
 MOPAR 318-360 1970-91 5/8”  3/4”  5.550”  1.78”  Small Block Mopar Water Pump  As-Cast
Polished 
1431800 $180.51
1431810 $284.56
 MOPAR 361-440 BB
& 426 HEMI® 1958-79
5/8”  3/4”  3.075”  2.125”  Water Pump (Cartridge only)
Water Pump (Cartridge only)
Water Pump Kit (Includes Housing, Cartridge & Water Neck)
Water Pump Kit (Includes Housing, Cartridge & Water Neck) 
As-Cast
Polished
As-Cast

Polished 
1444001 $90.03
1444011 $180.42
1474400 $232.99

1474401 $397.66

MOPAR WATER PUMP HOUSING

 

 Application  Finish  Part # Your Cost
 MOPAR 361-440 ,1958-79: High Quality Aluminum Alloy
Injection Molded Housing w/ Bosses for Both HEMI® & Big
Block Engine Applications
 As-Cast
Polished
 5244002 $143.41
5244012 $282.90


PONTIAC HIGH PERFORMANCE ALUMINUM WATER PUMP
PN-1445510 - PONTIAC 265-455 1969-79, Polished Finish

 Application   Pilot
Size
 Shaft
O.D.
 Block- to-
Hub Height
 Finish   Part # Your Cost
 PONTIAC 265-455,
1969-79
 5/8”  3/4"  4.5” As-Cast
Polished
1445500 $146.13
1445510 $199.84

Competition+™ HIGH FLOW
Aluminum racing Water Pumps
PRW high flow aluminum pumps are engineered to deliver increased water flow that significantly improves cooling system demands of Circle Track and Endurance Racing. These pumps are sealed by the ceramic coating that blocks excessive heat radiation (rather than absorbing it), thus preserving and extending the pump’s service life. This coating also provides superior corrosion resistance and rust protection. The low-pressure injected aluminum alloy pump bodies feature a precision cast-iron impeller design and pressure-balanced water passages to equalize flow and minimize engine hot spots at any speed. Other features include steel hubs and heavy duty shielded-sealed roller ball bearings.

• Auxiliary outlets for custom plumbing
• Ceramic coated to block excessive heat radiation
• Coated for corrosion resistance and rust protection
• Designed to equalize flow & minimize engine hot spots
• Features aluminum alloy pump bodies & cast-iron impellers


competition+™ racing water pumps are also suitable for marine applications!

 PN-1435012 - CHEVY SB, 1955-95, Polished Finish Water Pump


PQx® Competition+™
HIGH FLOW PERFORMANCE ALUMINUM WATER PUMPS

 Application Pilot Size   Shaft O.D.  Block- to- Hub Height  Inlet Size Finish  Part # _ Your Cost
 CHEVY SB 1955-95, Revised Impeller Entry,
0.100” Backplate for Drag Race, Circle Track or Marine,
All Auxiliary Outlets NPT/AN Fitting Ready, Short Style
 3/4” 3/4”  5.8125“  1.85“  As-Cast
Polished
Black Ceramic 
1435002 $189.56
1435012 $243.85
1435022 $221.23
 FORD 289/302/351W, 1970-Up Hi-Perf/Race w/ Left-Hand Inlet & Backplate, Short Style - Competition+ Pump is also Available in As-Cast or Polished Surface Finishes as well. 3/4”  3/4”  5.700”   1.78”   As-Cast
Polished
Black Ceramic
 1430202 $189.56
1430212 $283.65
1430222 $198.61



HIGH FLOW ELECRIC RACING
WATER PUMPS & ACCESSORIES
PQx® High Flow Die-Cast Aluminum Electric Racing Water Pumps
The electric water pump was designed to alleviate the power drag produced by conventional pulley drive units. A heavy duty electric motor, turning at approximately 1,500 rpm, is more than adequate to fulfill cooling needs without draining horsepower from the engine. The unit can be wired to operate manually, even with the engine off. The motor life is rated at 2,750 hours of continuous operation at 176° F. Kit is complete with gaskets, billet aluminum inlet fitting, mounting hardware, pigtail connector and timing cover block-off plate (Ford applications).

• Lightweight
• Suitable for Street or Strip
• Free flow rated at 35 gallons per minute
• Ford pumps available without the backplate
• Under normal use the pump will draw 6-7 amps
• 2,750 hours of life expectancy dependent upon use
• Pump will clear most timing belt drives and most blower drives
• Spacers may be required to clear belt drive distributor systems

 


PQx® HIGH FLOW DIE-CAST ELECTRIC RACING WATER PUMPS

 Application,Includes Hardware & Pig Tail  Part# __ Your Cost
 CHEVY SB 265-400, Black   4435007 $185.03
 CHEVY BB 396-454, Black  4445407 $228.46
 CHEVY SB 265-400, Chrome  4435009 $203.13
 FORD SB 302-351W, Black  4430207 $204.94
 FORD SB 302-351W, Chrome  4430209 $204.94
 FORD SB 302-351W, Black, Kit Includes Aluminum Backplate  4430217 $221.23
 FORD SB 302-351W, Chrome, Kit Includes Aluminum Backplate  4430219 $221.23
 FORD 351C, Black  4435107 $203.13
 FORD 351C, Black, Kit Includes Aluminum Backplate  4435117 $219.41
 FORD 351C, Chrome, Kit Includes Aluminum Backplate  4435119 $219.41
 FORD BB 400-460, Black  4446007 $203.13
 FORD BB 400-460, Chrome  4446009 $212.18
 FORD BB 400-460, Black,Kit Includes Aluminum Backplate  4446017 $212.18
 FORD BB 400-460, Chrome, Kit Includes Aluminum Backplate  4446019 $219.41
 
 BACKPLATES FOR DIE-CAST WATER PUMPS  Part# __ Your Cost
 FORD SB 302-351W, Black, (Includes Fastener Kit, Gaskets
for Timing Covers & Elbow Gaskets)
 5293028 $25.78
 FORD SB 302-351W, Silver, (Includes Fastener Kit, Gaskets
for Timing Covers & Elbow Gaskets)
 5293029 $25.78
 FORD 351C/351M/400M, Black, (Includes Fastener Kit,
Gaskets for Timing Covers & Elbow Gaskets)
 5293518 $25.78
 FORD 351C/351M/400M, Silver, (Includes Fastener Kit,
Gaskets for Timing Covers & Elbow Gaskets)
 5293519 $25.78
 FORD BB 429/460, Black (Includes Fastener Kit, Gaskets
for Timing Covers & Elbow Gaskets) NEW!
 5294298 $25.78
 FORD BB 429/460, Silver (Includes Fastener Kit, Gaskets
for Timing Covers & Elbow Gaskets) NEW!
 5294299 $25.78
 
 UNIVERSAL MOTOR & HOUSING  Part# __ Your Cost
 Motor & Housing Assembly for Die-Cast Electric Water
Pump, Universal, Black Powder Coat
4494495 $99.08
 Motor & Housing Assembly for Die-Cast Electric Water
Pump, Universal, Chrome
4494499 $207.65

FITTINGS & ACCESSORIES

 FITTINGS, Straight, 3/4” NPT, Billet Aluminum, Each
 Part# __ Your Cost
 3/4” NPT to 1.25” Hose x 3” Long 5292063 $22.17
 3/4” NPT to 1.50” Hose x 3” Long 5292073 $23.07
 3/4” NPT to 1.50” Hose x 5” Long 5292075 $24.88
 3/4” NPT to 1.75” Hose x 3” Long 5292083 $23.07
 3/4” NPT to 1.75” Hose x 5” Long 5292085 $26.69
 3/4" NPT to AN-12 Male Fitting x 3.25" Long 5292091 $26.69
 3/4" NPT to AN-16 Male Fitting x 2.25" Long 5292092 $21.26
 3/4" NPT to AN-16 Male Fitting x 3.5" Long 5292093 $26.69

     

   

PQx® High Flow Billet Aluminum
Electric Racing Water Pumps
The new Performance Quotient High Flow Billet Aluminum Electric Racing Water Pumps are designed to equalize the flow into both sides of the engine with smooth radiuses and transitions. The pump housing and elbows are CNC machined from high grade aluminum billets with O-ring seals at each connection

The impeller is a multi-vane, axial design that efficiently pumps the water through the engine with no cavitation. The 100 watt motor draws less that 9 amps on a 12 volt system and continued to flow over 50 gallons per minute in a closed system through PRW’s extensive testing. In fact, the motor tested to over 3,250 continuous hours - well over 100,000 miles of reliable cooling performance.

An inlet fitting is supplied with each pump and seals with an O-ring for a secure connection. PRW offers a variety of inlet sizes and lengths to match your application. Each Billet Electric Pump is supplied with gaskets, mounting hardware and wiring connector. Direct fit and universal pumps are available from your Performance Quotient dealer.

• Lightweight
• Suitable for Street or Strip
• Free flow rated at over 50 gallons per minute
• 3250 hours of life expectancy dependent upon use
• Under normal use the pump will draw less than 9 amps
• Ford billet pumps include silver backplate and fasteners
• Pump will clear most timing belt drives and most blower drives
• Spacers may be required to clear belt drive distributor systems



 BACKPLATES FOR BILLET WATER PUMPS

PQx® HIGH FLOW BILLET ELECTRIC RACING WATER PUMPS

 Application, Includes Mounting Hardware & Pig Tail
 Part# __ Your Cost
 CHEVY SB 265-400, Left Inlet, Polished Clear Anodized 4535021 $316.23
 CHEVY BB 396-502, Left Inlet, Polished Clear Anodized 4545421 $337.94
 FORD SB 302-351W, Right Inlet, Polished Clear Anodized 4530221 $352.42
 FORD 351C, 351/400M Right Inlet, Polished Clear Anodized 4535121 $325.28
 FORD BB 429-460, Right Inlet, Polished Clear Anodized,
Includes Housing Coverplate
4546021 $338.85

BACKPLATES FOR BILLET WATER PUMPS

 Application
 Part# __ Your Cost
 FORD 302-351W, Black 5293028 $25.78
 FORD 302-351W, Silver 5293029 $25.78
 FORD 351C, 351/400M, Black 5293518 $25.78
 FORD 351C, 351/400M, Silver 5293519 $25.78
 FORD 429-460, Black 5294608 $43.88
 FORD 429/460, Silver 5294509

FITTINGS & ACCESSORIES

 FITTINGS, Straight, 3/4” NPT, Billet Aluminum, Each
 Part# __ Your Cost
 (1-1/16"-20) 1.0625 w/ -20UN to 1.25" Hose x 3" Long 5282063 $22.17
 (1-1/16"-20) 1.0625 w/ -20UN to 1.50" Hose x 3" Long 5282073 $22.17
 (1-1/16"-20) 1.0625 w/ -20UN to 1.50" Hose x 5" Long 5282075 $23.98
 (1-1/16"-20) 1.0625 w/ -20UN to 1.750" Hose x 3" Long 5282083 $23.07
 (1-1/16"-20) 1.0625 w/ -20UN to 1.750" Hose x 5" Long 5282085

Top of Page

HOME