Melling Performance Engine Parts Catalog - Chrylser thru Toyota

Melling Premium Performance Engine Parts Catalog

Performance: Camshaft specifications, Torque Camshafts, Camshafts Using Hydraulic Flat Tappet Lifters, Camshafts Using Hydraulic Roller Lifters , Camshafts Using Hydraulic Retro-fit Roller Lifters, Torque Cam & Lifter Kits, Hydraulic Flat Tappet Lifters, Mechanical Flat Tappet Lifters, Hydraulic Retro-fit Roller Lifters, Hydraulic Roller Lifters, Valve Locks, Valve Springs with Mechanical Lifters, Valve Springs with Hydraulic Lifters, Anti pump up lifters,Valve Spring Retainers, Rocker Arms, Chrome Moly Push Rods, Guide Plates, Gear Drive Sets, 3pc Timing Sets, Melling lube, Oil Pumps, Oil Pump Screens, Oil Pump Drive Shafts, Long Slot Rocker Arms, Rocker Arm Studs

CHRYSLER, DODGE, DODGE TRUCKS, PLYMOUTH, FORD, FORD TRUCKS, LINCOLN, MERCURY, ISUZU, OLDSMOBILE, PONTIAC. TOYOTA Engine Parts

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877

Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need

Engine Rebuild Kit and Parts Online Catalog.

Engine Rebuild & Assembly Balancing &
Blueprinting Cylinder Heads

Engine Rebuild Kits Engine Start-up Other Related Web Sites Page 1

Crankshafts Degree Cam Other Related Web Sites Page 2

Purchase warranty & Return Information About the owner of RPM Frequently Asked Questions

MASTER ENGINE REBUILD KITS & PARTS

Home

Order Form

MELLING Premium
PERFORMANCE PARTS for

CHRYSLER, DODGE, DODGE TRUCKS, PLYMOUTH, FORD, FORD TRUCKS
LINCOLN, MERCURY, ISUZU, OLDSMOBILE, PONTIAC. TOYOTA with affordable prices.

Call toll free to purchase at 1-866-700-5877 or 1-801-754-5338 or

Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need

or use the Order Form for questions and to check stock.

SPECIALITY TOOLS & ENGINE ASSEMBLY LUB...15.

Melling Pre-Lube Engine Oiler.................................15.

OIL PUMP PRESSURE SPRING PACKS......................16.

TABLE OF CONTENTS FORD/FORD TRUCKS/LINCOLN-
MERCURY

AMC
AMERICN MOTORS ISUZU

BUICK OLDSMOBILE

CHEVROLET CARS AND TRUCKS PONTIAC

CHRYSLER/DODGE/
DODGETRUCK/
PLYMOUTH TOYOTA

Page 147.
PERFORMANCE - CHRYSLER PRODUCTS

Engine Year Line#

4Cyl.

2.0-Y (122) DOHC ENG. 1995-99 1

2.0-C,F (122) SOHC ENG 1995-05 2

V8

4.5 (273) ENG - 1965-69 3

5.2 (318) OHV ENG - 1975-02 4

5.6 (340) ENG - 1968-73 5

Engine Year Line#

V8 Continued

5.7-2,D,H (345) OHV ENG 2003-07 6

5.9 (360) OHV ENG 1971-02 7

5.9 (361) ENG - 1961-64 8

6.1-W,3 (370) OHV ENG 2005-07 9

6.3 (383) ENG - 1959-71 10

6.6 (400) OHV ENG - 1975-78 11

Engine Year Line#

V8 Continued

6.8 (413) ENG 1959-65 12

7.0 (426) WEDGE ENG 1963-65 13

7.0 (426) HEMI ENG 1966-71 14

7.2 (440) OHV ENG 1966-78 15

-

PERFORMANCE - CHRYSLER PRODUCTS

Line No. Part Title Part No. Description

1 2.0-Y (122) DOHC ENG. - 1995-99 - 4Cyl. - 3.44 Bore

- Mell Lube M10012 $4.93 $5.52 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10190 $271.70 HI VOLUME 20%. UPGRADED MATERIALS FOR IMPROVED PERFORMANCE AND DURABILITY. INSTALLED RELIEF SPRING DESIGNED TO INCREASE INTERNAL BY-PASS PRESSURE SETTING. SUPPLIED WITH ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO STOCK SETTINGS.

2 2.0-C,F (122) SOHC ENG - 1995-05 4 Cyl. - 3.45 Bore

- Mell Lube M10012 $4.93 $5.52 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10190 $271.70 HI VOLUME 20%. UPGRADED MATERIALS FOR IMPROVED PERFORMANCE AND DURABILITY. INSTALLED RELIEF SPRING DESIGNED TO INCREASE INTERNAL BY-PASS PRESSURE SETTING. SUPPLIED WITH ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO STOCK SETTINGS.

3 4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD1 $141.40 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23203 $260.62 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .444 .466 108 116 112

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 290114 $14.12 -

Valve Locks 471004 $4.52 INTAKE

Continued on Next Page

Page 148.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

3 4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore

- Valve Locks 474004 $2.16 EXHAUST

Valve Spring with Hydraulic Lifters 466434 $11.15 USE WITH [MTD1], [23301], [23203 $260.62 ], [23123] CAMS (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Chrome Moly Push Rods 500224 $7.73 1965-1967 USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

500594 $17.32 1968-1969 USE WITH HYDRAULIC LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40202 $65.09 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40406 $111.11 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M72HV $112.68 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12720 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

4 5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore

- Torque Camshaft 1975-1988 HYD.IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD1 $141.40 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23203 $260.62 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .444 .466 108 116 112

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 290114 $14.12 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Hydraulic Lifters 466434 $11.15 USE WITH [MTD1], [23301], [23203 $260.62 ], [23123] CAMS (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Chrome Moly Push Rods 500594 $17.32 1975-1989 EXC. ROLLER LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40202 $65.09 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40406 $111.11 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M72HV $112.68 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12720 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 149.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

5 5.6 (340) ENG - 1968-73 - V8 - 4.04 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD1 $141.40 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23203 $260.62 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .444 .466 108 116 112

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 290114 $14.12 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Hydraulic Lifters 466434 $11.15 USE WITH [MTD1], [23301], [23203 $260.62 ], [23123] CAMS (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Chrome Moly Push Rods 500594 $17.32 USE WITH HYD. LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40202 $65.09 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40406 $111.11 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M72HV $112.68 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12720 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

6 5.7-2,D,H (345) OHV ENG - 2003-07 - 8 Cyl. - 3.92 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10342 $262.24 EXCLUDES ASPEN. STANDARD VOLUME. PROTECTIVE ANODIZED BODY. CAST IRON COVER WITH PHOSPHATE COATING. SCREW IN VALVE. CUP PLUG REPLACED WITH THREADED FITTING. USES 1-1/8" BOLT ON SCREEN. INCLUDES OPTIONAL PRESSURE SPRINGS.

Page 150.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

7 Part Title Part No. Description

Line No. 5.9 (360) OHV ENG - 1971-02 - V8 - 4.00 Bore

- Torque Camshaft 1971-1988 HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD1 $141.40 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23203 $260.62 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .444 .466 108 116 112

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 290114 $14.12 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Hydraulic Lifters 466434 $11.15 USE WITH [MTD1], [23301], [23203 $260.62 ] CAMS (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475144 $10.37 USE W/ 466434 $11.15 SPRINGS

Chrome Moly Push Rods 500594 $17.32 1971-1988 USE WITH HYD. LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40202 $65.09 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40406 $111.11 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M72HV $112.68 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12720 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 151.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

8 5.9 (361) ENG - 1961-64 - V8 - 4.125 Bore

- Torque Camshaft SINGLE BOLT CAM. USE [466434]. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3000-6400. 23321 $82.10 242 242 329 329 .476 .476 106 106 106

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Mechanical Flat Tappet Lifters 299374 $15.84 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302 $265.37 ] & [23204] CAMS - NOTE: ASM. HEIGHT OF 1.80-MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CAM - NOTE: ASM. HEIGHT OF 1.80-MACHINING MAY BE REQUIRED

Valve Spring Retainers 475094 $5.58 CHROME MOLY - USE WITH [466154] & [466224] SPRINGS

475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

3pc Set 40203 $101.52 INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

9 6.1-W,3 (370) OHV ENG - 2005-07 - 8 Cyl. - 4.06 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10342 $262.24 STANDARD VOLUME. PROTECTIVE ANODIZED BODY. CAST IRON COVER WITH PHOSPHATE COATING. SCREW IN VALVE. CUP PLUG REPLACED WITH THREADED FITTING. USES 1-1/8" BOLT ON SCREEN. INCLUDES OPTIONAL PRESSURE SPRINGS.

Page 152.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

10 6.3 (383) ENG - 1959-71 - V8 - 4.250 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. USE [VS-430] SPRING W/ INSTALLED HGT. OF 1.86. SINGLE BOLT CAM. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3000-6400. 23321 $82.10 242 242 329 329 .476 .476 106 106 106

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Torque Cam Lifter Kit CLMD2 IMPROVES LOW-MID PERF. USE [VS-430]. SINGLE BOLT CAM. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTD2] CAM, 16-[JB-976] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-430] SPRING W/INSTALLED HGT. OF 1.86

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 299764 $30.00 1968-1971

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302.] & [23204] CAMS - NOTE: ASM HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CAM - NOTE: ASM. HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

Valve Spring Retainers 475094 $5.58 CHROME MOLY - USE WITH [466154] & [466224] SPRINGS

475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Valve Springs VS430 $4.36 USE W/ [MTD2] CAMSHAFT (MACHINING MAY BE REQUIRED)

Continued on Next Page

Page 153.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

10 6.3 (383) ENG - 1959-71 - V8 - 4.250 Bore

- Chrome Moly Push Rods 500384 $18.91 1961-1971 LOW BLOCK ENGINE - USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40203 $101.52 INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

11 6.6 (400) OHV ENG - 1975-78 - V8 - 4.34 Bore

- Torque Camshaft HYD. SINGLE BOLT CAM. USE [466434]. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 299764 $30.00 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302] & [23204] CAMS - NOTE: ASM. HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CAM - NOTE: ASM. HEIGHT OF 1.80 (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475094 $5.58 CHROME - USE WITH [466154] & [466224] SPRINGS

475144 $10.37 CHROME - USE WITH [466434] SPRINGS

Continued on Next Page

Page 154.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

11 6.6 (400) OHV ENG - 1975-78 - V8 - 4.34 Bore

- 3pc Set 40203 $101.52 INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

12 6.8 (413) ENG - 1959-65 - 8 Cyl. - 4.1876 Bore

- Torque Camshaft HYD. SINGLE BOLT CAM. USE [466434]. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3000-6400. 23321 $82.10 242 242 329 329 .476 .476 106 106 106

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Mechanical Flat Tappet Lifters 299374 $15.84 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH STOCK CAMS - MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302] & [23204] CAMS - NOTE: ASM. HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CAM - NOTE: ASM. HEIGHT OF 1.80 (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475094 $5.58 CHROME MOLY - USE WITH [466154] & [466224] SPRINGS

Continued on Next Page

Page 155.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

12 6.8 (413) ENG - 1959-65 - 8 Cyl. - 4.1876 Bore

- Valve Spring Retainers 475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

3pc Set 40203 $101.52 INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

13 7.0 (426) WEDGE ENG - 1963-65 - 8 Cyl. - 4.25 Bore

- Torque Camshaft HYD. SINGLE BOLT CAM. USE [466434]. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3000-6400. 23321 $82.10 242 242 329 329 .476 .476 106 106 106

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Mechanical Flat Tappet Lifters 299374 $15.84 -

Valve Locks 471004 $4.52 INTAKE

474004 $2.16 EXHAUST

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER- USE WITH STOCK CAMS- MACHINING MAY BE REQUIRED

466164 $7.12 INNER- USE WITH STOCK CAMS- MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302] & [23204] CAMS- NOTE: ASM. HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CA NOTE: ASM. HEIGHT OF 1.80 (MACHINING MAY BE REQUIRED)

Continued on Next Page

Page 156.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

13 7.0 (426) WEDGE ENG - 1963-65 - 8 Cyl. - 4.25 Bore

- Valve Spring Retainers 475094 $5.58 CHROME MOLY - USE WITH [466154] & [466224] SPRINGS

475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Chrome Moly Push Rods 500194 $7.04 1963-1963 USE W/MECH. LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

500474 $18.95 1964-1964 USE W/MECH. LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40203 $101.52 INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40217 $122.24 INCLUDES DOULBLE ROLLER CHAIN, STEEL 3 BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

14 7.0 (426) HEMI ENG - 1966-71 - 8 Cyl. - 4.250 Bore

- Valve Spring Retainers 475224 $20.59 -

Chrome Moly Push Rods 500364 $6.73 1970-1971 INTAKE MAX. SPRING PRESSURE 350..35 LBS.

500374 $6.04 1970-1971 EXHAUST MAX. SPRING PRESSURE 350..35 LBS

3pc Set 40217 $122.24 INCLUDES DOULBLE ROLLER CHAIN, STEEL 3 BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 157.
PERFORMANCE - CHRYSLER PRODUCTS (Continued)

Line No. Part Title Part No. Description

15 7.2 (440) OHV ENG - 1966-78 - V8 - 4.320 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. USE [466434] SPRING W/ INSTALLED HGT. OF 1.80. SINGLE BOLT CAM. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTD2 $150.95 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters SINGLE BOLT CAM. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 23204 $257.39 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .452 107 117 112

SINGLE BOLT CAM. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 23302 $265.37 236 236 302. 302. .480 .480 108 108 108

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3000-6400. 23321 $82.10 242 242 329 329 .476 .476 106 106 106

SINGLE BOLT CAM. CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 23401 242 253 311 322 .521 .551 108 110 109

Mechanical Flat Tappet Lifters 299374 $15.84 -

Hydraulic Flat Tappet Lifters 299764 $30.00 1968-1978

Valve Locks 471004 $4.52 INT.

474004 $2.16 EXH.

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER- USE WITH STOCK CAMS- MACHINING MAY BE REQUIRED

466164 $7.12 INNER- USE WITH STOCK CAMS- MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [23302 $265.37 ] & [23204 $257.39 ] CAMS- NOTE: ASM. HEIGHT OF 1.80- MACHINING MAY BE REQUIRED

466434 $11.15 USE WITH [MTD2] CA NOTE: ASM. HEIGHT OF 1.80 (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475094 $5.58 CHROME MOLY- USE WITH [466154] & [466224] SPRINGS

475144 $10.37 CHROME MOLY - USE WITH [466434] SPRINGS

Chrome Moly Push Rods 500334 $18.98 1968-1978 440 ENG. USE W/HYD. LIFTERS- EXC. 440 RAISED WEDGE ENG MAX. SPRING PRESSURE 350..35 LBS

500354 $9.32 1968-1978 440 ENG. USE W/MECH. LIFTERS- EXC. 440 RAISED WEDGE ENG MAX. SPRING PRESSURE 350..35 LBS

500474 $18.95 1968-1978 USE WITH MECHANICAL LIFTERS - W/440 RAISED WEDGE ENGINE MAX. SPRING PRESSURE 350..35 LBS.

500544 $8.41 1968-1978 440 ENG. USE W/HYD. LIFTERS- W/440 RAISED WEDGE ENG MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40203 $101.52 SINGLE BOLT CAM INCLUDES ROLLER CHAIN, CAST IRON SINGLE BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40217 $122.24 440 ENG. ONLY- 3 BOLT CAM INCLUDES DOULBLE ROLLER CHAIN, STEEL 3 BOLT CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40407 $92.01 SINGLE BOLT CAM INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M63HP $160.51 HI PRESSURE HI PRESSURE OIL PUMP

Oil Pump M63HV $142.99 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12630 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 158.
PERFORMANCE - FORD PRODUCTS & TRUCKS

Engine Year Line# Engine Year Line# Engine Year Line#

8 Cyl. V8 Continued V8 Continued

255 ENG 1980-82 1 302 ENG 1968-01 7 390. ENG 1961-76 14

260 ENG 1962-65 2 5.4-5,V (330) SOHC ENG 2004-08 8 400 ENG 1971-82 15

V8 351W ENG 1969-97 9 406. ENG 1962-63 16

4.6-R,V,Y (281) DOHC ENG 1996-04 3 351C ENG 1970-74 10 427. ENG 1963-68 17

4.6-X (281) SOHC ENG 1996-04 4 351M ENG 1975-81 11 428 ENG 1966-70 18

4.6-H,8 (281) SOHC ENG 2006-09 5 352. ENG 1958-67 12 429 ENG 1968-73 19

289 ENG 1963-68 6 360 ENG 1968-76 13 429 ENG 1980-98 20

- - 460 ENG 1972-97 21

PERFORMANCE - FORD PRODUCTS & TRUCKS

Line No. Part Title Part No. Description

1 255 ENG - 1980-82 - 8 Cyl. - 3.680 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48551T9 $147.77 RECOMMENDED FOR STREET ANS STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

2 260 ENG - 1962-65 - 8 Cyl. - 3.800 Bore

- Torque Camshaft HYD. EXCLUDES ROLLER LIFTERS. USE [VS-270] [466124] [466134] [466444] VALVE SPRINGS. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. MTF1 $109.55 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters EXCLUDES ROLLER LIFTERS. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 24108 $228.86 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

190. 202. 258 271 .412 .437 106 114 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24203 $232.09 214 224 288 300. .473 .497 108 116 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24210 $181.33 224 234 300. 306 .497 .520 107 117 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24212 $216.13 218 218 297 297 .458
.457 106 120 113

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24301 $241.60 231 231 288 288 .512 .512 106 114 110

Continued on Next Page

Page 159.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

2 260 ENG - 1962-65 - 8 Cyl. - 3.800 Bore

- Camshafts Using Hydraulic Flat Tappet Lifters CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5400. 24305 $554.75 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

227 234 298 302. .520 .520 107 117 112

Camshafts Using Hydraulic Retro-fit Roller Lifters FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4600 24110 $510.26 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

210 211 298 282 .444 .444 116 115 115

FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5300 24214 $593.07 219 219 285 285 .498 .498 110 110 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF1 CLASS I NOT COMPUTER COMPATIBLE. EXCLUDES ROLLER LIFTERS. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF1] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-270] SPRING W/INSTALLED HGT. OF 1.78

Hydraulic Flat Tappet Lifters 299004 $12.62 EXC. ROLLER USE FACTORY SETTING

299014 $10.26 EXC. ROLLER. ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Roller Lifters JB-2205 $18.98 STOCK REPLACEMENT STYLE

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFTS [24110], [24214]

Valve Locks 472004 $1.64 -

Valve Spring with Mechanical Lifters 466274 $6.19 INNER - USE WITH [24409] CAM. MACHINING MAY BE REQUIRED 1.080 O.D.

Valve Spring with Hydraulic Lifters VS270 $6.15 USE W/ [MTF1] CAMSHAFT. INSTALLED HGT OF 1.78. STOCK REPLACEMENT TYPE VALVE SPRING. MACHINING MAY BE REQUIRED

466124 $5.66 INNER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE STYLE VALVE SPRING. MACHINING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE STYLE VALVE SPRING. MACHINING MAY BE REQUIRED

466444 $7.38 USE WITH [24210], [24212], [24301], [24203], [MTF1], [MTF5] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE STYLE VALVE SPRING. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Continued on Next Page

Page 160.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

2 260 ENG - 1962-65 - 8 Cyl. - 3.800 Bore

- Valve Spring Retainers 475074 $8.01 CHROME MOLY - USE WITH [466114] SPRINGS

Chrome Moly Push Rods 500404 $17.30 HEAT TREATED MAX. SPRING PRESSURE 350..35 LBS. .

500584 $15.68 MAX. SPRING PRESSURE 350..35 LBS.

Guide Plates MGP1084 $12.02 FLAT-5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1094 $9.29 FLAT-3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

3pc Set 40206 $80.87 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40402 $111.08 NOT FOR USE WITH ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET. MUST USE MF126 $19.00 (3.356") THRUST PLATE WITH THIS SET. DO NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402] SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE ONE PIECE ECCENTRIC FORD PT # C3AZ6287B.

Oil Pump M68HV $66.72 HI VOL PUMP (25% ADDL VOL OF OIL) MAY REQUIRE OIL PAN MODIFICATION.

10687 $130.30 STANDARD VOLUME. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN.

10688 $139.68 HI VOLUME 25%. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN. MAY REQUIRE MINOR OIL PAN MODIFICATION.

Oil Pump Drive Shaft 12680 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

3 4.6-R,V,Y (281) DOHC ENG - 1996-04 - V8 - 3.550 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10227 $704.16 STANDARD VOLUME. PROTECTIVE ANODIZED BODY. MAG PHOSPHATE COATED COVER. 130,000 TSI TENSILE STRENGTH BILLET STEEL ROTORS. SCREW IN VALVE. USES 335S $115.97 SCREEN

Oil Pump Screen 335S $115.97 -

4 4.6-X (281) SOHC ENG - 1996-04 - V8 - 3.550 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10176 $650.20 STANDARD VOLUME. PROTECTIVE ANODIZED BODY. MAG PHOSPHATE COATED COVER. 130,000 TSI TENSILE STRENGTH BILLET STEEL ROTORS. SCREW IN VALVE. USES 13/16" DIAMETER SCREEN.

10227 $704.16 HIGH VOLUME 8%. PROTECTIVE ANODIZED BODY. MAG PHOSPHATE COATED COVER. 130,000 TSI TENSILE STRENGTH BILLET STEEL ROTORS. SCREW IN VALVE. USES 335S $115.97 SCREEN

Oil Pump Screen 335S $115.97 -

5 4.6-H,8 (281) SOHC ENG - 2006-09 - V8 - 3.55 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10340 $251.20 HI PRESSURE. PROTECTIVE ANODIZED COATED BODY. CAST ALUMINUM COVER WITH PHOSTPHATE COATING. USES 15/16" BOLT ON SCREEN.

Page 161.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

6 289 ENG - 1963-68 - 8 Cyl. - 4.000 Bore

- Torque Camshaft    HYD. EXCLUDES ROLLER LIFTERS. USE [VS-270] [466124] [466134] [466444] VALVE SPRINGS. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. MTF1 $109.55 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters   EXCLUDES ROLLER LIFTERS. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 24108 $228.86 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

190. 202. 258 271 .412 .437 106 114 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24203 $232.09 214 224 288 300. .473 .497 108 116 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24210 $181.33 224 234 300. 306 .497 .520 107 117 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24212 $216.13 218 218 297 297 .458
.457 106 120 113

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24301 $241.60 231 231 288 288 .512 .512 106 114 110

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5400. 24305 $554.75 227 234 298 302. .520 .520 107 117 112

Camshafts Using Hydraulic Retro-fit Roller Lifters   FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4600 24110 $510.26 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

210 211 298 282 .444 .444 116 115 115

Continued on Next Page

Page 162.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

6 289 ENG - 1963-68 - 8 Cyl. - 4.000 Bore

- Camshafts Using Hydraulic Retro-fit Roller Lifters FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5300 24214 $593.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

219 219 285 285 .498 .498 110 110 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF1 CLASS I NOT COMPUTER COMPATIBLE. EXCLUDES ROLLER LIFTERS. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF1] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-270] SPRING W/INSTALLED HGT. OF 1.78

Hydraulic Flat Tappet Lifters 299004 $12.62 EXC. ROLLER USE FACTORY SETTING

299014 $10.26 EXC. ROLLER. ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Roller Lifters JB-2205 $18.98 STOCK REPLACEMENT STYLE

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFTS [24110], [24214]

Valve Locks 472004 $1.64 -

Valve Spring with Mechanical Lifters 466274 $6.19 INNER - USE WITH [24409] CAM. PERFORMANCE TYPE VALVE SPRING. MACHINING MAY BE REQUIRED 1.080 O.D.

Valve Spring with Hydraulic Lifters VS270 $6.15 USE W/ [MTF1] CAMSHAFT. INSTALLED HGT OF 1.78. STOCK REPLACEMENT TYPE VALVE SPRING. MACHINING MAY BE REQUIRED

466124 $5.66 INNER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE TYPE VALVE SPRING. MACHINING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE TYPE VALVE SPRING. MACHINING MAY BE REQUIRED

466444 $7.38 USE WITH [24210], [24212], [24301], [24203], [MTF1], [MTF5] CAMS. NOTE: ASM. HEIGHT OF 1.80. PERFORMANCE TYPE VALVE SPRING. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

475074 $8.01 CHROME MOLY - USE WITH [466114] SPRINGS

Chrome Moly Push Rods 500584 $15.68 MAX. SPRING PRESSURE 350..35 LBS.

Guide Plates MGP1084 $12.02 FLAT-5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1094 $9.29 FLAT-3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

Continued on Next Page

Page 163.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

6 289 ENG - 1963-68 - 8 Cyl. - 4.000 Bore

- Gear Drive Set 48420 $269.96 LATE 1965 CAR APPLICATIONS USE 1/4" THRUST PLATE. TRUCK APPLICATIONS: SPACER CAST INTO HUB. OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED WITH 5 OPTIONAL COLOER CODED DOWEL PIN HOLE INSERTS.

3pc Set 48520T9 $147.77 LATE 1965 USE 1/4" THRUST PLATE INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48520W9 $124.23 LATE 1965 USE 1/4" THRUST PLATE INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. BRONZE WASHER

40206 $80.87 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40402 $111.08 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET. MUST USE MF126 $19.00 (3.356") THRUST PLATE WITH THIS SET. DO NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402] SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE ONE PIECE ECCENTRIC FORD PT # C3AZ6287B.

Oil Pump M68HV $66.72 HI VOL PUMP (25% ADDL VOL OF OIL) MAY REQUIRE OIL PAN MODIFICATION.

10687 $130.30 STANDARD VOLUME. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN.

10688 $139.68 HI VOLUME 25%. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN. MAY REQUIRE MINOR OIL PAN MODIFICATION.

Oil Pump Drive Shaft 12680 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 164.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

7 302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore

- Torque Camshaft    1968-1985 HYD. FOR 302. H/O ENGINE. USE LIFTER [466444]. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. MTF5 $119.01 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 290 .449 .473 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters   1968-1985 EXCLUDES 302. H/O ENGINE AND ROLLER LIFTERS. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 24108 $228.86 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

190. 202. 258 271 .412 .437 106 114 110

1968-1985 WHEN INSTALLING IN THE 302. H/O USE FIRING ORDER (15426378). CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24203 $232.09 214 224 288 300. .473 .497 108 116 112

1968-1985 WHEN INSTALLING IN THE 302. H/O USE FIRING ORDER (15426378). CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24212 $216.13 218 218 297 297 .458
.457 106 120 113

1968-1985 WHEN INSTALLING IN THE 302. H/O USE FIRING ORDER (15426378). CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24301 $241.60 231 231 288 288 .512 .512 106 114 110

1968-1995 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5400. 24305 $554.75 227 234 298 302. .520 .520 107 117 112

Camshafts Using Hydraulic Roller Lifters   1985-1995 FOR H/O ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. USE FIRING ORDER (13726548). CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2300-58000. 24227 $513.51 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

222232 300. 309 .509 .532 107 117 112

1968-1994 FOR H/O ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2000-5000. 24280 $460.96 220 223 286 292 .512 .512 109 115 112

Continued on Next Page

Page 165.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

7 302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore

- Camshafts Using Hydraulic Retro-fit Roller Lifters FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4600 24110 $510.26 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

210 211 298 282 .444 .444 116 115 115

FOR USE WITH RETRO-FIT ROLLER LIFTER [F1900RF16] CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5300 24214 $593.07 219 219 285 285 .498 .498 110 110 110

1985-1995 FOR H/O ENGINES ORIGINALLY EQUIPPED WITH ROLLER CAMS. USE RETRO-FIT ROLLER LIFTER [F1900RF16]; USE FIRING ORDER 13726548. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-5000 24226 $592.88 212 222 289 300. .491 .509 107 117 112

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF5 1982-1985 CLASS I NOT COMPUTER COMPATIBLE. FOR 302. H/O ENGINE. EXC. ROLLER LIFTERS. USE [466444]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF5] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82 W/[47505] RETAINERS, OR USE INTAKE SPRINGS W/STOCK FORD INTAKE RETAINERS IN PLACE OF STOCK EXHAUST SPRINGS AND ROTATING RET

Hydraulic Flat Tappet Lifters 299004 $12.62 1968-1992 EXC. ROLLER USE FACTORY SETTING

299014 $10.26 1968-1992 EXC. ROLLER. ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Roller Lifters JB-2205 $18.98 STOCK REPLACEMENT TYPE

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFTS [24110], [24214], [24226]; REQUIRES HEAD REMOVAL TO INSTALL LIFTERS

Valve Locks 472004 $1.64 -

Valve Spring with Mechanical Lifters 466274 $6.19 INNER - USE WITH [24409] CAM. MACHINING MAY BE REQUIRED 1.080 O.D.

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. MACHINING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [24210], [24212], [24301], [24203], [MTF1] CAMS. NOTE: ASM. HEIGHT OF 1.80. MACHINING MAY BE REQUIRED

466444 $7.38 USE WITH [24210], [24212], [24301], [24203], [MTF1], [MTF5] CAMS. NOTE: ASM. HEIGHT OF 1.80. MACHINING MAY BE REQUIRED

Continued on Next Page

Page 166.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

7 302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore

- Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

475074 $8.01 CHROME MOLY - USE WITH [466114] SPRINGS

Chrome Moly Push Rods 500414 $17.38 1969-1970 HEAT TREATED. 302. BOSS MAX. SPRING PRESSURE 350..35 LBS.

500444 $9.68 1971-1972 HEAT TREATED. 302. BOSS MAX. SPRING PRESSURE 350..35 LBS.

500584 $15.68 1968-1969 TO CHANGE L4 MAX. SPRING PRESSURE 350..35 LBS.

Guide Plates MGP1084 $12.02 FLAT-5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1094 $9.29 FLAT-3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

Gear Drive Set 48420 $269.96 1968-1995 RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM. 89-94 W/ROLLER CHAIN, 94-95 W/SILENT CHAIN. 68-72 USE STAND. 1/4" THRUST PLATE. SPACER CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD SEPERATE CAM SPACER. CAR APPLICATIONS ONLY. INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED WITH 5 OPTIONAL COLOER CODED DOWEL PIN HOLE INSERTS.

48420 $269.96 1969-1972 RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM. SPACER CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. TRUCK APPLICATIONS ONLY. INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED WITH 5 OPTIONAL COLOER CODED DOWEL PIN HOLE INSERTS.

3pc Set 48520T9 $147.77 1968-1972 CAR AND TRUCK APPLICATIONS. CAR APPLICATIONS USE 1/4" THRUST PLATE. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48520W9 $124.23 1968-1972 CAR AND TRUCK APPLICATIONS. CAR APPLICATIONS USE 1/4" THRUST PLATE. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. BRONZE WASHER

48551T9 $147.77 1972-2001 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 1989-90 WITH ROLLER TYPE CHAIN, 1994-01 WITH SILENT TYPE CHAIN. SPACER CAST INTO SPROCKET HUB OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. TRUCK APPLICATIONS ONLY. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

Continued on Next Page

Page 167.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

7 302 ENG - 1968-2001 - 8 Cyl. - 4.000 Bore

- 3pc Set 48551T9 $147.77 1972-1995 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 1989-94 WITH ROLLER TYPE CHAIN, 1994-95 WITH SILENT TYPE CHAIN. 80-88 H/O CAR APPLICATIONS ONLY. SPACER CAST INTO SPROCKET HUB. OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

40206 $80.87 1968-1994 CAR AND TRUCK APPLICATIONS INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40402 $111.08 YOU MUST USE [MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125] OR STOCK (3.882"L) PLATE. NOT FOR ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET. MUST USE MF126 $19.00 (3.356") THRUST PLATE WITH THIS SET. DO NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402] SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE ONE PIECE ECCENTRIC FORD PT # C3AZ6287B.

Oil Pump M68HV $66.72 HI VOL PUMP (25% ADDL VOL OF OIL) MAY REQUIRE OIL PAN MODIFICATION.

10687 $130.30 STANDARD VOLUME. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN.

10688 $139.68 HI VOLUME 25%. HEAVY DUTY SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES I/ S SHAFT. USES 5/8" BOLT ON SCREEN. MAY REQUIRE MINOR OIL PAN MODIFICATION.

Oil Pump Drive Shaft 12680 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

8 5.4-5,V (330) SOHC ENG - 2004-08 - 8 Cyl - 3.55 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10340 $251.20 HI PRESSURE. PROTECTIVE ANODIZED COATED BODY. CAST ALUMINUM COVER WITH PHOSTPHATE COATING. USES 15/16" BOLT ON SCREEN.

Page 168.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

9 351W ENG - 1969-97 - 8 Cyl. - 4.000 Bore

- Torque Camshaft 1969-1991 CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. MTF5 $119.01 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 290 .449 .473 107 117 112

Camshafts Using Hydraulic Flat Tappet Lifters USE 302. FIRING ORDER- 15426378. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 24108 $228.86 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

190. 202. 258 271 .412 .437 106 114 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5400. 24211 $265.43 224 234 300. 306 .497 .520 107 117 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24225 $289.25 219 219 308 308 .467
.467 107119 113

USE 302. FIRING ORDER 15426378. CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5400. 24305 $554.75 227 234 298 302. .520 .520 107 117 112

Hydraulic Flat Tappet Lifters 299004 $12.62 USE FACTORY SETTING

299014 $10.26 ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Roller Lifters JB-2205 $18.98 STOCK REPLACEMENT TYPE

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFT

Valve Locks 476104 $3.28 HARDENED

Valve Spring with Hydraulic Lifters 466174 $9.41 USE WITH [24225] & [MTF5] CAMS- MACHINING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY- USE WITH [466174] SPRINGS

Chrome Moly Push Rods 500394 $15.68 1969-1978 USE WITH CAST IRON ROCKER ARMS- HEAT TREATED MAX. SPRING PRESSURE 350..35 LBS.

500664 $14.31 1978-1994 USE W/STAMPED STEEL ROCKER ARMS- HEAT TREATED MAX. SPRING PRESSURE 350..35 LBS.

Guide Plates MGP1084 $12.02 FLAT-5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1094 $9.29 FLAT-3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

Gear Drive Set 48420 $269.96 1969-1989 RECOMMENDED FOR STREET AND STRIP, CLAIMER, RACING ENGINES UP TO 6,500 RPM. 1980-91 POLICE WITH ROLLER TYPE CHAIN. 1972 USE STANDARD 1/4" THRUST PLATE. SPACER CAST INTO HUB, OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. CAR APPLICATIONS ONLY. INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS, TIMING ADJUSTED WITH 5 OPTIONAL COLOER CODED DOWEL PIN HOLE INSERTS.

Continued on Next Page

Page 169.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

9 351W ENG - 1969-97 - 8 Cyl. - 4.000 Bore

- 3pc Set 48520T9 $147.77 1969-1972 EARLY 1972 USE STANDARD 1/4" THRUST PLATE. SPACER CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. CAR APPLICATIONS ONLY INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/ -4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48520W9 $124.23 1969-1972 EARLY 1972 USE STANDARD 1/4" THRUST PLATE. SPACER CAST INTO SPROCKET HUB, OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER. RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. CAR APPLICATIONS ONLY INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/ -4¦ CAM ADJUSTMENT. BRONZE WASHER

48551T9 $147.77 1972-1989 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. 5.8-G 87-89, HO 87-89 POLICE WITH ROLLER TYPE CHAIN. CAR APPLICATIONS ONLY. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48551T9 $147.77 1975-1997 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD, CLAIMER ENGINES. (94-97 WITH SILENT TYPE CHAIN, 84-86 4BBL) TRUCK APPLICATIONS ONLY. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/ -4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

40206 $80.87 1969-1996 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40402 $111.08 1969-1996 YOU MUST USE [MF126] (3.356"L) THRUST PLATE RATHER THAN [MF125] OR STOCK (3.882"L) PLATE. NOT FOR ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET. MUST USE MF126 $19.00 (3.356") THRUST PLATE WITH THIS SET. DO NOT USE TWO PIECE FUEL PUMP ECCENTRIC WITH [40402] SET. IF ENGINE HAS TWO PIECE ECCENTRIC DISCARD & USE ONE PIECE ECCENTRIC FORD PT # C3AZ6287B.

Oil Pump M83HV $109.65 HI VOLUME PUMP (25% ADDL VOLUME OF OIL) STOCK RELIEF VALVE AND SHAFT DESIGN - MAY REQUIRE MINOR OIL PAN MODIFICATION.

10832 $150.81 STANDARD VOLUME. HEAVY DUTY SHAFT SUPPORT. PERFORMANCE VALVE AND SHAFT DESIGN. RELIEF VALVE CUP PLUG REPLACED BY SCREW IN PLUG. INCLUDES I/S SHAFT. MAY REQUIRE MINOR OIL PAN MODIFICATION.

10833 $158.86 HI VOLUME 25%. HEAVY DUTY SHAFT SUPPORT. PERFORMANCE VALVE AND SHAFT DESIGN. RELIEF VALVE CUP PLUG REPLACED BY SCREW IN PLUG. INCLUDES I/S SHAFT. MAY REQUIRE MINOR OIL PAN MODIFICATION.

Oil Pump Drive Shaft 12830 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 170.PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

10 351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore

- Torque Camshaft    HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. USE [VS-280] SPRING W/ INSTALLED HGT. OF 1.82. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF2 $130.30 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 106 118 112

Camshafts Using Mechanical Flat Tappet Lifters   CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3500-6700. 24401 $115.53 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

244 254 292 301 .569 .589 104 108 106

Camshafts Using Hydraulic Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1300-4800. 24111 $284.48 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

208 208 284 284 .485 .485 107 115 111

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24204 $239.98 214 224 292 302. .511 .537 106 118 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1900-5400. 24224 $262.27 219 219 310 310 .505
.505 108 120 114

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24303 224 234 302. 308 .538
.562 107 117 112

Continued on Next Page

Page 171.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

10 351C ENG - 1970-74 - 8 Cyl. - 4.000 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF2 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-280]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF2] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Hydraulic Flat Tappet Lifters 299004 $12.62 USE FACTORY SETTING

299014 $10.26 ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFT

Valve Locks 476104 $3.28 HARDENED

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters VS280 $8.05 USE W/ [MTF2] CAMSHAFT; INSTALLED HGT. OF 1.82 (MACHINING MAY BE REQUIRED)

466224 $9.52 USE WITH [24204], [MTF2], [24224] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475114 $14.18 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500424 $6.82 HEAT TREATED EXC. BOSS MAX. SPRING PRESSURE 350..35 LBS.

500434 $7.86 HEAT TREATED - BOSS MAX. SPRING PRESSURE 350..35 LBS.

Guide Plates MGP1104 $16.70 RAISED3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1114 $50.64 RAISED5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

3pc Set 40405 $122.29 NOT FOR USE WITH ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M84AHV $92.14 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12844 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 172.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

11 351M ENG - 1975-81 - 8 Cyl. - 4.000 Bore

- Torque Camshaft    HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. USE [VS-280] SPRING W/ INSTALLED HGT. OF 1.82. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF2 $130.30 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 106 118 112

Camshafts Using Mechanical Flat Tappet Lifters   CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3500-6700. 24401 $115.53 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

244 254 292 301 .569 .589 104 108 106

Camshafts Using Hydraulic Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1300-4800. 24111 $284.48 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

208 208 284 284 .485 .485 107 115 111

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24204 $239.98 214 224 292 302. .511 .537 106 118 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1900-5400. 24224 $262.27 219 219 310 310 .505
.505 108 120 114

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24303 224 234 302. 308 .538
.562 107 117 112

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF2 CLASS I NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-280]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF2] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Hydraulic Flat Tappet Lifters 299004 $12.62 USE FACTORY SETTING

299014 $10.26 ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFT

Valve Locks 476104 $3.28 HARDENED

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters VS280 $8.05 USE W/ [MTF2] CAMSHAFT; INSTALLED HGT. OF 1.82 (MACHINING MAY BE REQUIRED)

466224 $9.52 USE WITH [24204], [MTF2], [24224] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 1978-1978 EXHAUST ONLY. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

475054 $9.79 1979-1979 INTAKE AND EXHAUST. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

475064 $5.80 1978-1978 INTAKE ONLY. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

Continued on Next Page

Page 173.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

11 351M ENG - 1975-81 - 8 Cyl. - 4.000 Bore

- Valve Spring Retainers 475064 $5.80 1975-1977 INTAKE AND EXHAUST. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

Guide Plates MGP1104 $16.70 RAISED3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1114 $50.64 RAISED5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

3pc Set 40405 $122.29 NOT FOR USE WITH ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M84AHV $92.14 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12844 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

12 352. ENG - 1958-67 - 8 Cyl. - 4.000 Bore

- Torque Camshaft 1963-1967 HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters 1963-1967 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

1963-1967 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

1963-1967 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF4 1963-1967 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466154], [466224] SPRINGS

Continued on Next Page

Page 174.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

12 352. ENG - 1958-67 - 8 Cyl. - 4.000 Bore

- Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 1958-1966 CAR APPLICATIONS ONLY INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40204 $92.12 1965-1967 TRUCK APPLICATIONS ONLY INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 1958-1966 CAR APPLICATIONS ONLY INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 1965-1967 TRUCK APPLICATIONS ONLY INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57HV $90.57 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

13 360 ENG - 1968-76 - 8 Cyl. - 4.050 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF4 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Continued on Next Page

Page 175.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

13 360 ENG - 1968-76 - 8 Cyl. - 4.050 Bore

- Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57HV $90.57 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

14 390. ENG - 1961-76 - 8 Cyl. - 4.050 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF4 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. C NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Continued on Next Page

Page 176.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

14 390. ENG - 1961-76 - 8 Cyl. - 4.050 Bore

- Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57HV $90.57 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

15 400 ENG - 1971-82 - 8 Cyl. - 4.000 Bore

- Torque Camshaft    HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. USE [VS-280] SPRING W/ INSTALLED HGT. OF 1.82. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF2 $130.30 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 106 118 112

Camshafts Using Mechanical Flat Tappet Lifters   CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3500-6700. 24401 $115.53 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

244 254 292 301 .569 .589 104 108 106

Camshafts Using Hydraulic Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1300-4800. 24111 $284.48 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

208 208 284 284 .485 .485 107 115 111

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24204 $239.98 214 224 292 302. .511 .537 106 118 112

Continued on Next Page

Page 177.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

15 400 ENG - 1971-82 - 8 Cyl. - 4.000 Bore

- Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1900-5400. 24224 $262.27 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

219 219 310 310 .505
.505 108 120 114

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24303 224 234 302. 308 .538
.562 107 117 112

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF2 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-280]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF2] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Hydraulic Flat Tappet Lifters 299004 $12.62 USE FACTORY SETTING

299014 $10.26 ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Hydraulic Retro-fit Roller Lifters F1900RF16 $1,139.87 RETRO-FIT LIFTER FOR USE W/ RETRO-FIT ROLLER CAMSHAFT

Valve Locks 472004 $1.64 1978-1979 EXH.

476704 $1.55 1978-1979 INT.

Valve Spring with Mechanical Lifters 466154 $5.09 OUTER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

466164 $7.12 INNER - USE WITH [24401] CAM. MACHINING MAY BE REQUIRED

Valve Spring with Hydraulic Lifters VS280 $8.05 USE W/ [MTF2] CAMSHAFT; INSTALLED HGT. OF 1.82 (MACHINING MAY BE REQUIRED)

466224 $9.52 USE WITH [24204], [MTF2], [24224] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 1978-1978 EXHAUST ONLY. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

475054 $9.79 1979-1979 INTAKE AND EXHAUST. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

475064 $5.80 1978-1978 INTAKE ONLY. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

475064 $5.80 1975-1977 INTAKE AND EXHAUST. CHROME MOLY. USE WITH [466154], [466164] SPRINGS

3pc Set 40405 $122.29 NOT FOR USE WITH ROLLER CAMS INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M84AHV $92.14 HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12844 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 178.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

16 406. ENG - 1962-63 - 8 Cyl. - 4.130 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMF4 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 1963-1963 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 1963-1963 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57HP $122.24 HI PRESSURE OIL PUMP

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 179.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

17 427. ENG - 1963-68 - 8 Cyl. - 4.233 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTF4 $265.34 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57HP $122.24 HI PRESSURE OIL PUMP

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 180.PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

18 428 ENG - 1966-70 - 8 Cyl. - 4.130 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF4 $143.04 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485
.511 104 120 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24205 $260.63 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .537 104 120 112

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5700. 24218 $241.55 224 224 315 315 .506 .506 109 115 112

CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2500-6000. 24302 $115.65 230 230 304 304 .554 .554 107 111 109

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTF4 $265.34 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF4] CAM, 16-[JB-2083] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Mechanical Flat Tappet Lifters 298724 $8.36 -

Hydraulic Flat Tappet Lifters 290834 $7.21 -

Valve Locks 473004 $1.40 HARDENED 2 GROOVES

Valve Spring with Hydraulic Lifters 466224 $9.52 USE WITH [24205], [24302], [MTF4] CAMS. MACHINING MAY BE REQUIRED

Valve Spring Retainers 475084 $8.35 CHROME MOLY - USE WITH [466224] SPRINGS

Chrome Moly Push Rods 500064 $14.12 FOR USE WITH MECHANICAL LIFTERS MAX.SPRING PRESSURE 350..35 LBS.

500074 $19.00 WITH DEEP SHELL TYPE - FOR USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40204 $92.12 INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

40410 $100.00 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M57B $101.63 1968-1970 COBRA JET AND SUPER COBRA JET

M57HV $90.57 EXCLUDES COBRA JET AND SUPER COBRA JET HI VOL PUMP (25% ADDL VOL OF OIL)

Oil Pump Drive Shaft 12600 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 181.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

19 429 ENG- 1968-73 - 8 Cyl. - 4.360 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-280] SPRING W/ INSTALLED HGT. OF 1.82. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF3 $147.68 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485 .512 107 117 112

Camshafts Using Mechanical Flat Tappet Lifters 24206 $300.45 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .544 107 117 112

CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24406 $162.31 244 254 294 304 .588 .614 107 117 112

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTF3 $257.47 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-280]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF3] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Hydraulic Flat Tappet Lifters JB-900 $10.16 FOR USE WITH [MTF3] CAMSHAFT

299004 $12.62 NOT FOR USE W/ [MTF3] CAMSHAFT USE FACTORY SETTING

299014 $10.26 NOT FOR USE W/ [MTF3] CAMSHAFT ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Valve Spring with Hydraulic Lifters VS280 $8.05 USE W/ [MTF3] CAMSHAFT; INSTALLED HGT. OF 1.82 (MACHINING MAY BE REQUIRED)

Guide Plates MGP1124 $17.38 RAISED3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1134 $17.39 RAISED5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

Gear Drive Set 48430 $361.86 1972-1973 RECOMMENDED FOR STREET AND STRIP, CLAIMER, RACING ENGINES UP TO 6,500 RPM. STANDARD 429. SPACER CAST INTO SPROCKET HUB. OLDER ENGINES DISCARD SEPERATE CAMSHAFT SPACER INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. ADJUST WITH OPTIONAL 5 COLOR CODED DOWEL PIN HOLE INSERTS.

3pc Set 48530T9 $142.94 1972-1973 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

40403 $128.66 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Continued on Next Page

Page 182.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

19 429 ENG- 1968-73 - 8 Cyl. - 4.360 Bore

- Oil Pump M84B $142.91 1969-1970 (HIGH PRESSURE PUMP) SPECIAL

M84B $142.91 1970-1973 (HIGH PRESSURE PUMP) POLICE, COBRA JET, SUPER COBRA JET

M84BHVS $162.01
$161.58 EXCLUDING POLICE, COBRA JET, SUPER COBRA JET - USE W/OIL PAN DEPTH OF 8 1/4". MAY REQUIRE MINOR MODIFICATION OF OIL PAN. HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES BOLT ON PICKUP ASSY.

M84EHVS $173.07
$172.68 1970-1973 POLICE, COBRA JET, SUPER COBRA JET- USE W/OIL PAN DEPTH OF 8 5/8" - MAY REQUIRE MINOR MODIFICATION OF OIL PAN HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES BOLT ON PICKUP ASSY.

Oil Pump Drive Shaft 12840 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

20 429 ENG - 1980-98 - 8 Cyl. - 4.360 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump M84DHV $141.35 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Screen 84DS2 $64.97 -

Oil Pump Drive Shaft IS84 $18.94 -

12840 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

21 460 ENG - 1972-97 - 8 Cyl. - 4.360 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-280] SPRING W/ INSTALLED HGT. OF 1.82. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTF3 $147.68 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 282 292 .485 .512 107 117 112

Camshafts Using Mechanical Flat Tappet Lifters 24206 $300.45 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 292 302. .511 .544 107 117 112

CLASS IV. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 24406 $162.31 244 254 294 304 .588 .614 107 117 112

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Continued on Next Page

Page 183.
PERFORMANCE - FORD PRODUCTS & TRUCKS (Continued)

Line No. Part Title Part No. Description

21 460 ENG - 1972-97 - 8 Cyl. - 4.360 Bore

- Torque Cam Lifter Kit CLMTF3 $257.47 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-280]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTF3] CAM, 16-[JB-900] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-280] SPRING W/INSTALLED HGT. OF 1.82

Hydraulic Flat Tappet Lifters JB-900 $10.16 FOR USE WITH [MTF3] CAMSHAFT

299004 $12.62 NOT FOR USE W/ [MTF3] CAMSHAFT USE FACTORY SETTING

299014 $10.26 NOT FUR USE W/ [MTF3] CAMSHAFT ANTI-PUMP UP; SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Valve Spring with Hydraulic Lifters VS280 $8.05 USE W/ [MTF3] CAMSHAFT; INSTALLED HGT. OF 1.82 (MACHINING MAY BE REQUIRED)

Guide Plates MGP1124 $17.38 RAISED3/8" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

MGP1134 $17.39 RAISED5/16" THICK- MUST BE USED WITH SCREW-IN ROCKER ARM STUDS

3pc Set 48530T9 $142.94 1972-1978 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4¦/-4¦ CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

40403 $128.66 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M84B $142.91 1972-1978 CAR APPLICATIONS. HIGH PRESSURE PUMP. POLICE CAR

M84BHVS $162.01
$161.58 1974-1997 TRUCK-VAN APPLICATIONS. USE W/OIL PAN DEPTH OF 8 1/4". MAY REQUIRE MINOR MODIFICATION OF OIL PAN. HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES BOLT ON PICKUP ASSY.

M84BHVS $162.01
$161.58 1972-1978 CAR APPLICATIONS. EXCLUDING POLICE - USE W/OIL PAN DEPTH OF 8 1/4". MAY REQUIRE MINOR MODIFICATION OF OIL PAN. HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES BOLT ON PICKUP ASSY.

M84D $90.41 1979-1997 HIGH PRESSURE PUMP. F100/F450

M84D $90.41 1989-1997 HIGH PRESSURE PUMP. F53 MOTOR HOME

M84D $90.41 1975-1996 HIGH PRESSURE PUMP. E250/E350

M84DHV $141.35 1974-1997 TRUCK/VAN ONLY. SCREEN NOT INCLUDED HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP

M84EHVS $173.07
$172.68 1972-1978 CAR APPLICATIONS. POLICE CAR - USE W/ OIL PAN DEPTH OF 8 5/8". MAY REQUIRE MINOR MODIFICATION OF OIL PAN. HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES BOLT ON PICKUP ASSY.

Oil Pump Screen 84DS1 $63.36 1974-1997 TRUCK/VAN ONLY. FOR USE WITH 84DHV - 11 5/8" OVERALL LENGTH

84DS2 $64.97 1974-1997 TRUCK/VAN ONLY. FOR USE WITH 84DHV - 13 1/4" OVERALL LENGTH

Oil Pump Drive Shaft 12840 $25.22 PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT

Page 184.
PERFORMANCE - ISUZU

Line No. Part Title Part No. Description

1 5.3-M,P (323) OHV ENG - (2003-06) - 8 Cyl. - 96mm Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10295 $201.71 2003-2004 STANDARD VOLUME. HI PRESSURE 10%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN.

10296 $266.95 2003-2004 HI VOLUME 18%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN. INCLUDES OPTIONAL HI PRESSURE SPRING.

PERFORMANCE - OLDSMOBILE

Engine Year Line# Engine Year Line# Engine Year Line#

8 Cyl. 8 Cyl. Continued 8 Cyl. Continued

260 ENG - 1975-82 1 307 ENG - 1980-88 4 403 ENG - 1977-79 7

267 ENG - 1981-82 2 350..35 ENG - 1968-80 5 425 ENG - 1965-67 8

305 ENG - 1977-88 3 400 ENG - 1965-69 6 455 ENG - 1968-76 9

PERFORMANCE - OLDSMOBILE

Line No. Part Title Part No. Description

1 260 ENG - 1975-82 - 8 Cyl. - 3.500 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Continued on Next Page

Page 185.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

1 260 ENG - 1975-82 - 8 Cyl. - 3.500 Bore

- Torque Cam Lifter Kit CLMTO1 $276.55 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

3pc Set 40409 $119.17 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

2 267 ENG - 1981-82 - 8 Cyl. - 3.500 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Gear Drive Set 48400 $243.52 NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

48400Q $222.32 QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

Page 186.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

3 305 ENG - 1977-88 - 8 Cyl. - 3.736 Bore

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

- Gear Drive Set 48400 $243.52 NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

48400Q $222.32 QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

4 307 ENG - 1980-88 - 8 Cyl. - 3.500 Bore

- Torque Camshaft 1980-1984 HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters 1980-1984 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

1980-1984 DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

1980-1984 DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Continued on Next Page

Page 187.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

4 307 ENG - 1980-88 - 8 Cyl. - 3.500 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTO1 $276.55 1980-1984 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 1980-1984

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

5 350. .. ENG - 1968-80 - 8 Cyl. - 4.057 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Continued on Next Page

Page 188.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

5 350. . ENG - 1968-80 - 8 Cyl. - 4.057 Bore

- Torque Cam Lifter Kit CLMTO1 $276.55 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

Gear Drive Set 48400 $243.52 1977-1979 NOISY - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

48400Q $222.32 1977-1979 QUIET - INCLUDES 8620 CARBURIZED STEEL GEARS, ROLLER CAM BUTTON, LOCK PLATE AND BOLTS. TIMING ADJUSTED WITH 5 OPTIONAL COLOR CODED DOWEL PIN HOLE INSERTS. RECOMMENDED FOR STREET AND STRIP, CLAIMER AND RACING ENGINES UP TO 6,500 RPM.

3pc Set 48500T9 $130.30 1977-1979 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 1977-1979 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

Page 189.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

6 400 ENG - 1965-69 - 8 Cyl. - 4.000 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters 1967-1969 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

1967-1969 DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

1967-1969 DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTO1 $276.55 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 EXCLUDES 1966-67

Valve Locks 476104 $3.28 11/32 inch STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

Chrome Moly Push Rods 500564 $7.65 1968-1969 HEAT TREATED MAX. SPRING PRESSURE 350..35 LBS.

3pc Set 40409 $119.17 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

Page 190.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

7 403 ENG - 1977-79 - 8 Cyl. - 4.350 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTO1 $276.55 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

3pc Set 40409 $119.17 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

Page 191.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

8 425 ENG - 1965-67 - 8 Cyl. - 4.125 Bore

- Torque Camshaft 1967-1967 HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters 1967-1967 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

1967-1967 DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

1967-1967 DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMO1 1967-1967 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

3pc Set 40409 $119.17 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

Page 192.
PERFORMANCE - OLDSMOBILE (Continued)

Line No. Part Title Part No. Description

9 455 ENG - 1968-76 - 8 Cyl. - 4.125 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-720] SPRING W/ INSTALLED HGT. OF 1.67. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTO1 $157.33 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 280 289 .449 .473 106 118 112

Camshafts Using Hydraulic Flat Tappet Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 25211 $287.60 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 289 300. .473 .497 106 118 112

DURATION AT .50 INTAKE 244 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 25309 $365.64 244 244 314 314 .475
.475 110 110 110

DURATION AT .50 INTAKE 232 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 25310 $289.22 232 232 329 329 .474 .474 112 114 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMO1 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-720]. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTO-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-720] SPRING W/INSTALLED HGT. OF 1.67

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 11/32" STEM

Valve Spring with Hydraulic Lifters 466124 $5.66 INNER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

466134 $6.69 OUTER - USE WITH [25211], [25309], [MTO-1], [25310] CAMS - MACHING MAY BE REQUIRED

Valve Spring Retainers 475054 $9.79 CHROME MOLY - USE WITH [466134] SPRINGS

Valve Springs VS720 $3.01 USE W/ [MTO-1] CAMSHAFT (MACHINING MAY BE REQUIRED)

Chrome Moly Push Rods 500564 $7.65 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40409 $119.17 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

Page 193.
PERFORMANCE - PONTIAC

Engine Year Line# Engine Year Line# Engine Year Line#

6 Cyl. 8 Cyl. Continued 8 Cyl. Continued

3.8-K (229) ENG 1980-81 1 5.0 (307) ENG - 1971-72 6 6.0-U (364) OHV ENG 2005-08 12

4.3-Z (262) ENG - 1985 2 326 ENG - 1963-73 7 389 ENG - 1959-66 13

8 Cyl. 350..35 ENG - 1968-76 8 400 ENG - 1967-69 14

4.4-J (267) ENG - 1981-82 3 350-P ENG - 1977 9 421 ENG - 1963-66 15

301 ENG - 1977-81 4 5.7-L (350) ENG - 1977-79 10 428 ENG - 1967-69 16

5.0 (305) ENG - 1977-87 5 5.7-G (350) OHV ENG 1998-02 11 455 ENG - 1970-76 17

PERFORMANCE - PONTIAC

Line No. Part Title Part No. Description

1 3.8-K (229) ENG - 1980-81 - 6 Cyl. - 3.736 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

2 4.3-Z (262) ENG - 1985 - 6 Cyl. - 4.00 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

3 4.4-J (267) ENG - 1981-82 - 8 Cyl. - 3.50 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

Page 194.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

4 301 ENG - 1977-81 - 8 Cyl. - 4.000 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INT. 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INT. 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. BIND. USE [VS-310] INNER SPRING W/INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/INSTALLED HGT. OF 1.59. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299694 $6.23 USE FACTORY SETTING

299704 $9.17 ANTI-PUMP UP, SET AT ZERO LASH; MUST BE USED W/ ADJUSTABLE VALVE TRAIN

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

Page 195.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

5 5.0 (305) ENG - 1977-87 - 8 Cyl. - 3.736 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

6 5.0 (307) ENG - 1971-72 - 8 Cyl. - 3 7/8 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

Page 196.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

7 326 ENG - 1963-73 - 8 Cyl. - 3.719 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INT. 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INT. 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 7 [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500574 $8.17 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

Page 197.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

8 350. . ENG - 1968-76 - 8 Cyl. - 3.875 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INT. 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INT. 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit MTP1 $154.07 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500274 $18.94 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

Page 198.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

9 350-P ENG - 1977 - 8 Cyl. - 3.875 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INT. 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INT. 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Continued on Next Page

Page 199.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

9 350-P ENG - 1977 - 8 Cyl. - 3.875 Bore

-- Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500274 $18.94 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

10 5.7-L (350) ENG - 1977-79 - 8 Cyl. - 3.875 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

3pc Set 48500T9 $130.30 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. PRESS FIT ROLLER THRUST BEARINGS.

48500W9 $134.03 RECOMMENDED FOR STREET AND STRIP, CIRCLE TRACK, HOT ROD AND CLAIMER ENGINES. INCLUDES SEAMLESS DOUBLE ROLLER CHAIN (.250" ROLLER), BILLET STEEL CAM SPROCKET & 9 KEYWAY CRANK SPROCKET WITH +4°/-4° CAM ADJUSTMENT. BRONZE WASHER

11 5.7-G (350) OHV ENG - 1998-02 - 8 Cyl. - 3.90 Bore

- Camshafts Using Hydraulic Roller Lifters CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATABLE. POWER RANGE 2000-5000. 22201 $523.03 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

223 223 291 291 .566 .566 1101 18 114

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Valve Spring Retainers 475234 $6.87 CHROME MOLY

Oil Pump 10295 $201.71 STANDARD VOLUME. HI PRESSURE 10%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN.

10296 $266.95 HI VOLUME 18%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN. INCLUDES OPTIONAL HI PRESSURE SPRING.

Page 200.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

12 6.0-U (364) OHV ENG - 2005-08 - 8 Cyl. - 4.00 Bore

- Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Oil Pump 10295 $201.71 2005-2006 STANDARD VOLUME. HI PRESSURE 10%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN.

10296 $266.95 2005-2006 HI VOLUME 18%. PROTECTIVE COATING. SCREW IN VALVE. USES 7/8" BOLT ON SCREEN. INCLUDES OPTIONAL HI PRESSURE SPRING.

13 389 ENG - 1959-66 - 8 Cyl. - 4.062 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INT. 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INTAKE 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Continued on Next Page

Page 201.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

13 389 ENG - 1959-66 - 8 Cyl. - 4.062 Bore

- Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500574 $8.17 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

14 400 ENG - 1967-69 - 8 Cyl. - 4.120 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INTAKE 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INTAKE 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Continued on Next Page

Page 202.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

14 400 ENG - 1967-69 - 8 Cyl. - 4.120 Bore

- Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500274 $18.94 1968-1969 EXCLUDES 1967 MAX. SPRING PRESSURE 350..35. LBS.

500574 $8.17 1967-1967 WITH 1ST TYPE CYL HEAD WITH PUSH ROD GUIDE PLATE - HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

15 421 ENG - 1963-66 - 8 Cyl. - 4.093 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Continued on Next Page

Page 203.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

15 421 ENG - 1963-66 - 8 Cyl. - 4.093 Bore

- Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INTAKE 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INTAKE 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CMASHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500574 $8.17 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

Page 204.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

16 428 ENG - 1967-69 - 8 Cyl. - 4.120 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INTAKE 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INTAKE 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500574 $8.17 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Continued on Next Page

Page 205.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

16 428 ENG - 1967-69 - 8 Cyl. - 4.120 Bore

- Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

17 455 ENG - 1970-76 - 8 Cyl. - 4.151 Bore

- Torque Camshaft HYD. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59. CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700. MTP1 $154.07 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

204 214 278 288 .421 .443 108 116 112

Camshafts Using Hydraulic Flat Tappet Lifters DURATION AT .50 INTAKE 214 CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200. 26204 $228.77 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 288 298 .443 .466 108 116 112

DURATION AT .50 INTAKE 224 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 3200-6700. 26303 $284.55 224 236 298 310 .407 .407 112 119 115

DURATION AT .50 INT. 231 CLASS III. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2650-6200. 26308 $259.01 231 240 304 316 .470 .470 112 115 113

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Torque Cam Lifter Kit CLMTP1 $263.91 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID PERF. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59 LIFT. NOT CALIFORNIA COMPLIANT KIT INCLUDES 1-[MTP-1] CAM, 16-[JB-951] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-310] INNER SPRING W/ INSTALLED HGT. OF 1.57 & [VS-450] OUTER SPRING W/ INSTALLED HGT. OF 1.59.

Hydraulic Flat Tappet Lifters 299514 $14.20 -

Valve Locks 476104 $3.28 -

Continued on Next Page

Page 206.
PERFORMANCE - PONTIAC (Continued)

Line No. Part Title Part No. Description

17 455 ENG - 1970-76 - 8 Cyl. - 4.151 Bore

- Valve Spring with Hydraulic Lifters VS310 $4.39 USE W/ [MTP-1] CAMSHAFT; INNER SPRING (MACHINING MAY BE REQUIRED)

VS450 $5.36 USE W/ [MTP-1] CAMSHAFT; OUTER SPRING (MACHINING MAY BE REQUIRED)

Valve Spring Retainers 475054 $9.79 CHROME MOLY

Rocker Arms 498464 $8.28 -

Chrome Moly Push Rods 500274 $18.94 HEAT TREATED MAX. SPRING PRESSURE 350..35. LBS.

3pc Set 40408 $111.09 INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET

Oil Pump 10540 $214.41 HI PRESSURE PUMP - INCLUDES SCREEN STANDARD VOLUME. STANDARD PRESSURE. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/4" DIAMETER SCREEN.

10541 $209.71 HI PRESSURE PUMP (30% MORE PRESSURE THAN 10540) INCLUDES SCREEN STANDARD VOLUME. HIGH PRESSURE 30%. STANDARD SHAFT SUPPORT. PROTECTIVE COATING. SCREW IN VALVE. INCLUDES 3/ 4" DIAMETER SCREEN.

SPORT COMPACT PERFORMANCE -
TOYOTA CARS & TRUCKS

Line No. Part Title Part No. Description

1 2189CC 20R OHC ENG - 1975-80 - 4 Cyl. - 88 MM Bore

- Camshafts Using Mechanical Flat Tappet Lifters CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 27101 $321.08 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 - .417
.429 105 115 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5200. 27201 $278.08 224 234 - .429 .441 105 115 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

2 2366CC 22R OHC ENG - 1981-90 - 4 Cyl. - 92 MM Bore

- Camshafts Using Mechanical Flat Tappet Lifters CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 27101 $321.08 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 - .417
.429 105 115 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5200. 27201 $278.08 224 234 - .429 .441 105 115 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Page 207.

SPORT COMPACT PERFORMANCE -
TOYOTA CARS & TRUCKS (Continued)

Line No. Part Title Part No. Description

3 2366CC 22RE OHC ENG - 1989-95 - 4 Cyl. - 92 MM Bore

- Camshafts Using Mechanical Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 27101 $321.08 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 - .417
.429 105 115 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5200. 27201 $278.08 224 234 - .429 .441 105 115 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

4 2366CC 22REC OHC ENG - 1983-89 - 4 Cyl. - 92 MM Bore

- Camshafts Using Mechanical Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 27101 $321.08 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 - .417
.429 105 115 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5200. 27201 $278.08 224 234 - .429 .441 105 115 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

5 2366CC 22RTEC OHC ENG - 1985-88 - 4 Cyl. - 92 MM Bore

- Camshafts Using Mechanical Flat Tappet Lifters   CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1000-4500. 27101 $321.08 Degrees .050" dur Degrees ADV. Dur Inches
Valve
lift Degrees Lobe cntr. Degrees Separ-
ation

Int.
Exh. Int.
Exh. Int.
Exh. Int.
Exh. -

214 224 - .417
.429 105 115 110

CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 2200-5200. 27201 $278.08 224 234 - .429 .441 105 115 110

Mell Lube M10012 $4.93 ENGINE ASSEMBLY LUBRICANT

Top of Page

HOME

Engine Rebuild & Assembly	Balancing & Blueprinting	Cylinder Heads
Engine Rebuild Kits	Engine Start-up	Other Related Web Sites Page 1
Crankshafts	Degree Cam	Other Related Web Sites Page 2
Purchase warranty & Return Information	About the owner of RPM	Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

TABLE OF CONTENTS	FORD/FORD TRUCKS/LINCOLN- MERCURY
AMC AMERICN MOTORS	ISUZU
BUICK	OLDSMOBILE
CHEVROLET CARS AND TRUCKS	PONTIAC
CHRYSLER/DODGE/ DODGETRUCK/ PLYMOUTH	TOYOTA

Engine	Year	Line#
Engine	Year	Line#
4Cyl.
2.0-Y (122) DOHC ENG.	1995-99	1
2.0-C,F (122) SOHC ENG	1995-05	2
V8
4.5 (273) ENG -	1965-69	3
5.2 (318) OHV ENG -	1975-02	4
5.6 (340) ENG -	1968-73	5

Line No.	Part Title	Part No.	Description
1	2.0-Y (122) DOHC ENG. - 1995-99 - 4Cyl. - 3.44 Bore
-	Mell Lube	M10012 $4.93 $5.52	ENGINE ASSEMBLY LUBRICANT
-	Oil Pump	10190 $271.70	HI VOLUME 20%. UPGRADED MATERIALS FOR IMPROVED PERFORMANCE AND DURABILITY. INSTALLED RELIEF SPRING DESIGNED TO INCREASE INTERNAL BY-PASS PRESSURE SETTING. SUPPLIED WITH ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO STOCK SETTINGS.
2	2.0-C,F (122) SOHC ENG - 1995-05 4 Cyl. - 3.45 Bore
-	Mell Lube	M10012 $4.93 $5.52	ENGINE ASSEMBLY LUBRICANT
-	Oil Pump	10190 $271.70	HI VOLUME 20%. UPGRADED MATERIALS FOR IMPROVED PERFORMANCE AND DURABILITY. INSTALLED RELIEF SPRING DESIGNED TO INCREASE INTERNAL BY-PASS PRESSURE SETTING. SUPPLIED WITH ADDITIONAL SPRING TO REDUCE BY-PASS PRESSURE TO STOCK SETTINGS.
3	4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore
-	Torque Camshaft HYD. IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700.	MTD1 $141.40	Degrees .050" dur	Degrees ADV. Dur	Inches Valve lift	Degrees Lobe cntr.	Degrees Separ- ation
			Int. Exh.	Int. Exh.	Int. Exh.	Int. Exh.	-
			204 214	278 288	.421 .443	108 116	112
	Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200.	23203 $260.62	Degrees .050" dur	Degrees ADV. Dur	Inches Valve lift	Degrees Lobe cntr.	Degrees Separ- ation
			Int. Exh.	Int. Exh.	Int. Exh.	Int. Exh.	-
			214 224	288 298	.444 .466	108 116	112
	Mechanical Flat Tappet Lifters	299374 $15.84	-
	Hydraulic Flat Tappet Lifters	290114 $14.12	-
	Valve Locks	471004 $4.52	INTAKE

3	4.5 (273) ENG - 1965-69 - V8 - 3.625 Bore
-	Valve Locks	474004 $2.16	EXHAUST
	Valve Spring with Hydraulic Lifters	466434 $11.15	USE WITH [MTD1], [23301], [23203 $260.62 ], [23123] CAMS (MACHINING MAY BE REQUIRED)
	Valve Spring Retainers	475144 $10.37	CHROME MOLY - USE WITH [466434] SPRINGS
	Chrome Moly Push Rods	500224 $7.73	1965-1967 USE WITH MECHANICAL LIFTERS MAX. SPRING PRESSURE 350..35 LBS.
		500594 $17.32	1968-1969 USE WITH HYDRAULIC LIFTERS MAX. SPRING PRESSURE 350..35 LBS.
	3pc Set	40202 $65.09	INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
		40406 $111.11	INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
	Oil Pump	M72HV $112.68	HI VOL PUMP (25% ADDL VOL OF OIL)
	Oil Pump Drive Shaft	12720	PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT
4	5.2 (318) OHV ENG - 1975-02 - V8 - 3.910 Bore
-	Torque Camshaft 1975-1988 HYD.IMPROVES LOW-MID PERF. CHECK FOR COIL BIND. (EXC. ROLLER LIFTERS) CLASS I. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1200-4700.	MTD1 $141.40	Degrees .050" dur	Degrees ADV. Dur	Inches Valve lift	Degrees Lobe cntr.	Degrees Separ- ation
			Int. Exh.	Int. Exh.	Int. Exh.	Int. Exh.	-
			204 214	278 288	.421 .443	108 116	112
	Camshafts Using Hydraulic Flat Tappet Lifters EXC. ROLLER LIFTERS. CLASS II. NOT CALIFORNIA COMPLIANT NOT COMPUTER COMPATIBLE. POWER RANGE 1700-5200.	23203 $260.62	Degrees .050" dur	Degrees ADV. Dur	Inches Valve lift	Degrees Lobe cntr.	Degrees Separ- ation
			Int. Exh.	Int. Exh.	Int. Exh.	Int. Exh.	-
			214 224	288 298	.444 .466	108 116	112
	Mechanical Flat Tappet Lifters	299374 $15.84	-
	Hydraulic Flat Tappet Lifters	290114 $14.12	-
	Valve Locks	471004 $4.52	INTAKE
		474004 $2.16	EXHAUST
	Valve Spring with Hydraulic Lifters	466434 $11.15	USE WITH [MTD1], [23301], [23203 $260.62 ], [23123] CAMS (MACHINING MAY BE REQUIRED)
	Valve Spring Retainers	475144 $10.37	CHROME MOLY - USE WITH [466434] SPRINGS
	Chrome Moly Push Rods	500594 $17.32	1975-1989 EXC. ROLLER LIFTERS MAX. SPRING PRESSURE 350..35 LBS.
	3pc Set	40202 $65.09	INCLUDES ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
		40406 $111.11	INCLUDES SEAMLESS SOLID ROLLER CHAIN, CAST IRON CAM SPROCKET & MULTIPLE KEYWAY CRANK SPROCKET
	Oil Pump	M72HV $112.68	HI VOL PUMP (25% ADDL VOL OF OIL)
	Oil Pump Drive Shaft	12720	PERFORMANCE TYPE INTERMEDIATE SHAFT. HIGH STRENGTH (150,000 PSI) CHROME MOLY STEEL. IMPROVED SHAFT RETAINER WHICH LOCKS ONTO THE OIL PUMP DRIVE SHAFT