Melling Engine Parts Catalog - Oil Pumps, Valves & other parts for GMC & CHEVY TRUCKS

Melling Engine Parts Catalog

Melling Lube, Oil Pumps, Oil Pump Kits, Oil Pump Screen Assemblies, Timing Belts, Timing Chains, Camshafts, Lifters, Camshaft & Lifter Kits, Cam Buttons, Tensioners, Intake & Exhausst Valves, Jet Valves, Rocker Arms & Kits, Rocker Arm Pivot Kits, Cam Sprockets, Crankshaft Sprockets, Timing Chain Sets, Valve Springs, Valve Spring Retainers, Push RodsTorque camshaft kits, Oil Pump Drive Gears, Oil Filter Adapter, Timing Chain Damper, Intermediate Shafts, Expansion Plug Kits (brass & steel), Balance Shafts & Parts, Tensioners, Guides, Rocker Arm Shafts, Balance shaft Elimination kit, Timing Components, Timing Covers & ohter parts

GMC/CHEVY - Chevrolet TRUCKS Engine Parts

RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
1-801-754-5338 or Toll free 1-866-700-5877
Contact us anytime 24-7

Engine Rebuild Kit and Parts Online Catalog.

Engine Rebuild & Assembly Balancing &
Blueprinting Cylinder Heads

Engine Rebuild Kits Engine Start-up Other Related Web Sites Page 1

Crankshafts Degree Cam Other Related Web Sites Page 2

Purchase warranty & Return Information About the owner of RPM Frequently Asked Questions

MASTER ENGINE REBUILD KITS & PARTS

Home

Order Form

GMC/CHEVY - Chevrolet TRUCKS - Melling Engine Parts with affordable prices.

Call toll free to purchase at 1-866-700-5877 or 1-801-754-5338 or
Contact us anytime 24-7 or use the Order Form for questions and to check stock.

PERFORMANCE CATALOG

ACURA ALFA ROMEO

ALLIS CHALMERS
LIFT TRUCK ALLIS CHALMERS TRACTOR

AMERICAN MOTORS AUDI

AUSTIN BMW

BUICK 1.6Lto 3.0L BUICK
3.1L to 455 cu. in.

CADILLAC CASE TRACTOR

CATERPILLAR CHEVROLET
1.0L to 230cu. in.

CHEVROLET
231c.i. to 454c.i. CHRYSLER INDUSSTRIAL

CHRYSLER CONTINENTAL

CUMMINS DAEWOO

DAIHATSU DESOTO

DETROIT DIESEL DODGE

DODGE TRUCK EAGLE

FIAT FORD Model
A & B to Model T

FORD
1.3L to 312 cu. in. FORD 5.4L thru
460. cu. in.

FORD INDUSTRIAL FORD
TRACTOR

FORD TRUCK GMC/CHEVY TRUCKS

HENRY-J HERCULES

HONDA HUMMER

HYUNDAI I.H.C. TRACTOR & POWER UNITS

I.H.C. TRUCK INFINITI

ISUZU JAGUAR

JEEP JOHN DEERE TRACKTOR

KAISER KIA

LEXUS MAZDA

MERCEDES BENZ MERCURY (INC. LINCOLN)

MG MINNEAPOLIS
MOLINE

MITSUBISHI NISSAN/
DATSUN

NISSAN INDUSTRIAL OLDSMOBILE

OLIVER TRACTOR OPEL

PERKINS PEUGEOT

PLYMOUTH PONTIAC

PORSCHE RENAULT

ROVER SAAB

SATURN STUDEBAKER

SUBARU SUZUKI

TOYOTA TRIUMPH

VOLKSWAGEN VOLVO

WAUKESHA WHITE PDQ TRUCKS

WHITE TRUCK WISCONSIN

PERFORMANCE CATALOG

This is what a typical timing chain Damper looks like (not a spring damper).

Page 388.
GMC/CHEVY TRUCKS

Engine Year Line#

4 Cyl.

1.6-6 1588CC SOHC 1994-00 1

1.6-U (98) SOHC 1989-95 2

1.8 (111) OHC 1972-75 3

1.8 (111) OHC 1976-82 4

1.9-A (119) OHC 1982-85 5

2.0-C (122) DOHC 1999-03 6

2.0-Y (122) OHV 1983-84 7

2.2 DIESEL 1981-83 8

2.2-4,5,H (134) OHV 1994-03 9

2.2-S DIESEL 1984-85 10

6 Cyl.

145 1961-63 11

2.5-4 2500CC DOHC 2001-04 12

4 Cyl.

2.5-A (151) OHV 1991-93 13

2.5-E (151) OHV 1985-91 14

153 (OHV) 1963-65 15

6 Cyl.

164 1964-65 16

4 Cyl.

2.8-8 (169) DOHC 2004-06 17

V6

2.8-B & R (173) 1982-93 18

6 Cyl.

194. (OHV) 1963-66 19

V6

200 (OHV) 1978-79 20

6 Cyl.

3.4-F (207) OHV 2005-09 21

5 Cyl.

3.5-6 (211) DOHC 2004-06 22

6 Cyl.

216 1942-53 23

V6

229 (OHV) 1980-84 24

6 Cyl.

230 (OHV) 1963-69 25

V6

231 (OHV) 1978-84 26

6 Cyl.

235 1941-62 27

248 1939-55 28

250 1966-84 29

4.2-S (256) DOHC 2002-09 30

261 1954-62 31

Engine Year Line#

6 Cyl. (Continued)

4.3-B (262) 1990-91 32

V6

4.3-N (262) 1985-86 33

6 Cyl.

4.3-W (262) OHV 1992-02 34

4.3-X (262) 1996-10 35

V6

- 1986-95 36

8 Cyl.

265 1955-57 37

267 1979-82 38

6 Cyl.

270 1941-63 39

8 Cyl.

283 1957-67 40

288 1955-58 41

6 Cyl.

4.8-T (292) 1963-89 42

8 Cyl.

4.8-A,C,V (294) OHV 1999-10 43

6 Cyl.

302 1952-59 44

V6

305-A 1960-61 45

305-B 1960-65 46

305-C 1970-74 47

305-D 1960-65 48

305-E 1963-69 49

8 Cyl.

5.0 (305) OHV 1976-02 50

307 1968-73 51

317 1955-58 52

322 1956-60 53

324 1955-56 54

5.3 (323,325) OHV 1999-10 55

327 1962-68 56

336 1958-59 57

347. 1957-58 58

348. 1958-65 59

5.7 (350) 1969-76 60

5.7-N (350) 1983-84 61

5.7-Z (350) 1978-81 62

5.7-K (350) 1987-96 63

5.7-L, M & P (350) 1974-88 64

5.7-R (350) OHV 1996-02 65

Engine Year Line#

V6

351. C,E,M 1960-72 66

D351 DIESEL 1965-67 67

8 Cyl.

6.0 (364) OHV 1999-10 68

6.0 (366) 1966-98 69

370. 1957-59 70

V6

379 1973-74 71

8 Cyl.

6.2 (379) DIESEL 1982-93 72

6.2-8 (378) OHV 2007-08 73

6.5 (395) DIESEL 1992-02 74

396. (400) 1968-70 75

400 1974-80 76

6.6 (400) OHV DIESEL 2001-10 77

6 Cyl.

6.6-J (403) 1990-98 78

V6

401. 1960-65 79

401. 1966-72 80

8 Cyl.

400 (402) 1971-72 81

409 1962-65 82

7.0 (427) 1968-98 83

6 Cyl.

7.2-C (441) 1998-09 84

V6

432 & 432M 1973-74 85

8 Cyl.

7.4 (454) 1971-00 86

7.4-D (454) OHV 1999-00
87

V6

478,478M 1962-74 88

6 Cyl.

D478,DH478 DIESEL 1965-74 89

7.8-3,B (475) 1999-09 90

8 Cyl.

8.1-G (496) OHV 2001-07 91

637 1970-72 92

D637,DH637 1966-72 93

12 Cyl.

702. 1960-65 94

8 Cyl.

8.1-E,G (496) OHV 2001-09 95

8.2-F,G (501) 1980-91 96

GMC/CHEVY TRUCKS

Line Part Title Part No Description

1 1.6-6 1588CC SOHC ENG - 1994-00 - 4 Cyl. - 2.96 Bore (GEO TRACKER--SUZUKI ENG. M.F.I.)

- Oil Pump M169 $123.92 1994-1995

M238 $117.56 1996-2000

Mell Lube M10012 $4.93 -

Belt B0164 $14.15 1994 95 TEETH EXC. CALIF. EMISSIONS

B0164 $14.15 1995 95 TEETH 2WD EXC. CALIF. EMISSION

B0212 $17.93 1996-1998 103 TEETH

Page 389.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

2 1.6-U (98) SOHC ENG - 1989-95 - 4 Cyl. - 2.95 Bore (GEO TRACKER--SUZUKI ENG. T.B.I.)

- Oil Pump M169 $123.92 -

Mell Lube M10012 $4.93 -

Exhaust Valve V5173 $21.45 1989-1992 Head Dia. 1.278

Belt B0164 $14.15 1989-1993 95 TEETH

B0164 $14.15 1994 95 TEETH EXC. CALIF.

B0164 $14.15 1995 95 TEETH 2WD EXC. CALIF. EMISSION

B0212 $17.93 1994-1995 103 TEETH CALIF. ONLY

3 1.8 (111) OHC ENG - 1972-75 - 4 Cyl. - 3.307 Bore (LUV-SERIES 1,2,3,4)

- Camshaft CLT1 $93.75 -

Mell Lube M10012 $4.93 -

Exhaust Valve V5079 $11.16 Head Dia. 1.296

Chain 3DR84 $15.73 LINKS CAMSHAFT

Damper BD37 $7.17 PRIMARY CRANKSHAFT

4 1.8 (111) OHC ENG - 1976-82 - 4 Cyl. - 3.307 Bore (LUV-SERIES 5,6,8,9,10,11 & 12)

- Oil Pump M139 $69.83 -

Camshaft CLT2 $165.91 MECH.

Mell Lube M10012 $4.93 -

Intake Valve V5087 $5.57 1976-1979 Head Dia. 1.668

V5094 $5.77 1980-1982 Head Dia. 1.588

Exhaust Valve V5086 $7.95 1976-1979 Head Dia. 1.336

V5093 $12.75 1980-1982 Head Dia. 1.336

Valve Springs VS920 $2.53 INNER

Valve Locks VL600 $4.45 -

Rocker Arm Shaft MRS1640 $63.64 INT.

Chain 3SR94 $20.45 94 LINKS

Cam Sprocket S500 $17.32 38 TEETH

Crank Sprocket S501 $8.81 19 TEETH

Tensioner BT17 $11.03 ADJUSTER FOR TENSIONER

BT63 $9.07 TENSIONER

Damper BD34 $7.00 -

Timing Kit 3SR94-1 $69.40 KIT INCLUDES [3SR94], [S500], [S501], [BT17], [BT63] & [BD34]

Expansion Plug Kits MPE146 $6.46 CARDED, STEEL KIT INCLUDES (3) MPC-224 $0.56 BLOCK, (1) MPC-258 $0.80 BLOCK, (1) MEP-68 $1.14 BLOCK/HEAD

MPE146R $4.02 BAGGED, STEEL KIT INCLUDES (3) MPC-224 $0.56 BLOCK, (1) MPC-258 $0.80 BLOCK, (1) MEP-68 $1.14 BLOCK/HEAD

5 1.9-A (119) OHC ENG - 1982-85 - 4 Cyl. - 3.425 Bore

- Oil Pump M139 $69.83 -

Camshaft CLT2 $165.91 MECH.

Mell Lube M10012 $4.93 -

Intake Valve V5094 $5.77 Head Dia. 1.588

Exhaust Valve V5093 $12.75 Head Dia. 1.336

Valve Springs VS920 $2.53 1982-1983 INNER

Valve Locks VL600 $4.45 -

Rocker Arm Shaft MRS1640 $63.64 INT.

Chain 3SR94 $20.45 94 LINKS

Cam Sprocket S500 $17.32 38 TEETH

Crank Sprocket S501 $8.81 19 TEETH

Tensioner BT61 $23.55 ADJ.

BT63 $9.07 TENSIONER

Damper BD34 $7.00 -

Timing Kit 3SR94-2 $128.24 KIT INCLUDES [3SR94], [S500], [S501], [BT63], [BT61] & [BD34]

Expansion Plug Kits MPE171 $7.31 CARDED, STEEL KIT INCLUDES (5) MPC-224 $0.56 BLOCK, (1) MPC-258 $0.80 BLOCK, (1) MEP-201 $0.40 BLOCK

Expansion Plug Kits MPE171R $2.53 BAGGED, STEEL KIT INCLUDES (5) MPC-224 $0.56 BLOCK, (1) MPC- 258 BLOCK, (1) MEP-201 $0.40 BLOCK

Page 390.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

6 2.0-C (122) DOHC ENG - 1999-03 - 4 Cyl. - 3.31 Bore (TRACKER)

- Mell Lube M10012 $4.93 -

Lifters JB6050 $18.95 HYD.

7 2.0-Y (122) OHV ENG - 1983-84 - 4 Cyl. - 3.504 Bore

- Oil Pump M98 $141.35 -

M98HV $77.56 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP

M98HVS1 $161.89 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP. INCLUDES SCREEN 4WD ONLY

Pump Kit K98 $36.49 EXC. HI VOL

Screen Assy 98S $20.45 -

Intermediate Shaft IS98 $8.35 -

Nylon Shaft Guide M55024 $0.67 -

Camshaft CCS34 $130.06 HYD.

Camshaft Lifter Kit CLCCS34 KIT INCLUDES 1-[CCS-34] CAM, 8-[JB-969] LIFTERS & 4OZ MELL LUBE

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB969 $6.81 HYD.

Push Rods MPR346 $2.91 -

Intake Valve V1466 $5.89 Head Dia. 1.600

Exhaust Valve V1465 $9.33 Head Dia. 1.378

Valve Springs VS580 $5.37 -

Valve Locks VL710 $1.75 -

Rocker Arms MR864 $8.00 -

Rocker Arm Kit MRK407 $9.87 KIT INCLUDES 1-[MR-864], 1-[MRM-1721], 1-[MRM-1720] & 1-[MRM-1723]

Rocker Arm Ball MRM1721 $0.67 -

Rocker Arm Nut MRM1720 $1.84 -

Rocker Arm Stud MRDS948 $3.77 57MM OVERALL LENGTH, 10MM DIAMETER WITH HEX NUT

Chain 370 $29.99 58 LINKS

Cam Sprocket S558 $9.08 40 TEETH

Crank Sprocket S549 $18.87 20 TEETH

Tensioner BT5115 $18.84 -

3pc Timing Set 3-370S $45.98 INCLUDES [370], [S558] & [S549]

Expansion Plug Kits MPE183 $7.35 CARDED, STEEL KIT INCLUDES (1) MPC-166 $0.46 BLOCK/HEAD, (4) MPC-272 $0.83 BLOCK, (1) MPP-490, (1) MPP-560, (3) MPP-567, (1) MPP-638 $0.38

MPE183R $4.64 BAGGED, STEEL KIT INCLUDES (1) MPC-166 $0.46 BLOCK/HEAD, (4) MPC-272 $0.83 BLOCK, (1) MPP-490, (1) MPP-560, (3) MPP-567, (1) MPP-638 $0.38

8 2.2 DIESEL ENG - 1981-83 - 4 Cyl. - 88 MM Bore (LUV 11 & 12--ISUZU ENG)

- Mell Lube M10012 $4.93 -

Belt B075 $25.76 87 TEETH

Page 391.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

9 2.2-4,5,H (134) OHV ENG - 1994-03 - 4 Cyl. - 3.500 Bore (1994 - 03 2.2-4, 2000-02 2.2-5) (S10, SONOMA)

-

Oil Pump M248 $117.50 OIL PUMP ONLY

M248-249S $136.57 OIL PUMP AND SCREEN

Screen Assy 249S $25.30 -

Intermediate Shaft IS98 $8.35 -

Camshaft MC1303 $425.90 1994-1997 HYD ROLLER

Camshaft MC1351 $535.75 1998-2003 HYD. ROLLER

Cam Thrust Plate Spacer MG221 $4.05 1994-1997

Mell Lube M10012 $4.93 -

Lifters JB2270 $18.84 HYD. ROLLER

Push Rods MPR490 $3.50 1994-1997

MPR610 $3.86 1998-2003

Intake Valve V1736 $9.89 1994-1997 Head Dia. 1.732

V1902 $11.69 1998-2003 Head Dia. 1.732

Exhaust Valve V1737 $12.45 1994-1997 Head Dia. 1.457

V1903 $14.17 1998-2003 Head Dia. 1.457

Rocker Arm Nut MRM1860 $0.97 1994-1996

Chain 370 $29.99 58 LINKS

395 $20.51 LINKS RETRO FIT FINE FINISH CHAIN (MUST BE USED WITH [BT 5115] TENSIONER)

Cam Sprocket S774 $29.99 40 TEETH

Crank Sprocket S549 $18.87 20 TEETH

Tensioner BT5115 $18.84 FOR USE WITH [370] AND [395] CHAINS

3pc Timing Set 3-370SA $34.34 INCLUDES [370], [S774] & [S549]

3-395S $58.77 INCLUDES [395], [S774], [S549], [BT5115] RETRO FIT FINE FINISH CHAIN SET, CHECK FOR POSSIBLE OILING PROBLEM WHEN INSTALLING SET.

10 2.2-S DIESEL ENG - 1984-85 - 4 Cyl. - 88 MM Bore

- Mell Lube M10012 $4.93 -

Intake Valve V5216 $8.72 Head Dia. 1.575

Belt B075 $25.76 87 TEETH

11 145 ENG - 1961-63 - 6 Cyl. - 3 7/16 Bore (CORVAIR,R1200FC,GREENBRAIR BUS)

- Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Valve Springs VS170 $4.45 -

Valve Locks VL200 $1.21 -

12 2.5-4 2500CC DOHC ENG - 2001-04 - 6 Cyl. - 3.31 Bore (CHEVROLET TRACKER--SUZUKI ENG. MFI)

-

Mell Lube M10012 $4.93 -

Lifters JB6050 $18.95 HYD.

13 2.5-A (151) OHV ENG - 1991-93 - 4 Cyl. - 4.000 Bore

- Oil Pump M62C $61.93 -

M62CHV $109.60 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Pump Kit K62C $37.99 EXC. HI VOL

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62CS1 $25.25 -

Intermediate Shaft IS62C $31.69 -

Camshaft MC1269 $235.16 HYD. ROLLER

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER

Push Rods MPR372 $2.11 -

Intake Valve V1592 $9.41 Head Dia. 1.720

Exhaust Valve V1591 $12.99 Head Dia. 1.500

Valve Locks VL710 $1.75 -

Rocker Arms MR865 $9.14 -

Rocker Arm Kit MRK409 $11.91 KIT INCLUDES 1-[MR-865] & 1-[MRM-1716]

Continued on Next Page

Page 392.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

13 2.5-A (151) OHV ENG - 1991-93 - 4 Cyl. - 4.000 Bore (Continued)

- Rocker Arm Bolt MRM1530 $0.96 -

Rocker Arm Ball MRM1716 $1.72 -

Cam Gear 2542 $57.11 54 TEETH FIBER

Crank Gear 2537 $39.58 27 TEETH

Gear Set 2542S $96.93 FIBER INCLUDES [2542] & [2537]

Expansion Plug Kits MPE163 $7.41 CARDED, STEEL KIT INCLUDES (5) MPC-41 $0.75 BLOCK, (1) MPC- 42 CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163B $18.77 CARDED, BRASS KIT INCLUDES (5) MPC-41-B BLOCK, (1) MPC- 42-B CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163BR $18.86 BAGGED, BRASS KIT INCLUDES (5) MPC-41-B BLOCK, (1) MPC- 42-B CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163R $10.18 BAGGED, STEEL KIT INCLUDES (5) MPC-41 $0.75 BLOCK, (1) MPC- 42 CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

14 2.5-E (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore

- Oil Pump M62C $61.93 -

M62CHV $109.60 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Pump Kit K62C $37.99 EXC. HI VOL

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62CS1 $25.25 -

Intermediate Shaft IS62C $31.69 -

Camshaft SPC17 $122.37 HYD. ROLLER

Camshaft Lifter Kit CLSPC17 $307.27 KIT INCLUDES 1-[SPC-17] CAM, 8-[JB-2079] LIFTERS & 4OZ MELL LUBE HYD. ROLLER

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER

Push Rods MPR282 $1.69 1985-1986

MPR372 $2.11 1987-1991

Intake Valve V1438 $7.00 1985-1986 Head Dia. 1.720

V1592 $9.41 1989-1991 Head Dia. 1.720

Exhaust Valve V1437 $10.37 1985-1986 Head Dia. 1.500

V1550 $9.13 1987-1988 Head Dia. 1.500

V1591 $12.99 1989-1991 Head Dia. 1.500

Valve Springs VS170 $4.45 1985-1986

VS2208 $7.08 1987-1988

VS2209 $8.72 1989-1991

Valve Locks VL200 $1.21 1985-1986

VL710 $1.75 1987-1991

Rocker Arms MR865 $9.14 -

Rocker Arm Kit MRK409 $11.91 KIT INCLUDES 1-[MR-865] & 1-[MRM-1716]

Rocker Arm Bolt MRM1510 $1.75 1985-1986

MRM1520 $1.99 1987-1988

MRM1530 $0.96 1989-1991

Rocker Arm Ball MRM1716 $1.72 -

Cam Gear 2542 $57.11 54 TEETH FIBER

Crank Gear 2537 $39.58 27 TEETH

Gear Set 2542S $96.93 FIBER INCLUDES [2542] & [2537]

Continued on Next Page

Page 393.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

14 2.5-E (151) OHV ENG - 1985-91 - 4 Cyl. - 4.000 Bore (Continued)

- Expansion Plug Kits MPE163 $7.41 CARDED, STEEL KIT INCLUDES (5) MPC-41 $0.75 BLOCK, (1) MPC- 42 CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163B $18.77 CARDED, BRASS KIT INCLUDES (5) MPC-41-B BLOCK, (1) MPC- 42-B CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163BR $18.86 BAGGED, BRASS KIT INCLUDES (5) MPC-41-B BLOCK, (1) MPC- 42-B CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

MPE163R $10.18 BAGGED, STEEL KIT INCLUDES (5) MPC-41 $0.75 BLOCK, (1) MPC- 42 CAMSHAFT, (1) MPC-54 $0.29 BLOCK, (1) MPS-150 $0.95 CAMSHAFT, (1) MPP-554 $0.38

15 153 (OHV) ENG - 1963-65 - 4 Cyl. - 3 7/8 Bore

- Oil Pump M62 $57.10 -

M62HV $133.39 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Drive Gear DG62C $40.11 -

Camshaft SPC13 $204.97 HYD.

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR317 $2.27 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 Head Dia. 1.500

Valve Springs VS170 $4.45 -

Valve Locks VL200 $1.21 -

Rocker Arms MR844 $5.22 -

Rocker Arm Kit MRK402 $6.74 KIT INCLUDES 1-[MR-844], 1-[MRM-1783] & 1-[MRM-1786]

Rocker Arm Ball MRM1783 $1.66 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Cam Gear 2524 $57.16 54 TEETH ALUM.

2542 $57.11 54 TEETH FIBER

Crank Gear 2501 $21.41 27 TEETH

Gear Set 2525S $96.80 INCLUDES [2524] & [2501]

16 164 ENG - 1964-65 - 6 Cyl. - 3 7/16 Bore (CORVAIR R-10,GREENBRAIR BUS,R1200FC)

- Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Valve Springs VS170 $4.45 -

Valve Locks VL200 $1.21 -

17 2.8-8 (169) DOHC ENG - 2004-06 - 4 Cyl. - 3.66 Bore (CANYON,COLORADO)

- Pump Kit K322 $169.99 -

Mell Lube M10012 $4.93 -

Page 394.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

18 2.8-B & R (173) ENG - 1982-93 - V6 - 3.504 Bore (1982-85 2.8-B & 1986-93 2.8-R) (1982-93 2WD) (1982 4WD)

-

Oil Pump M95B $68.15 1982-1989 ALL W/5/8" DIA. INLET HOLE

M95B $68.15 1990 1ST DES. W/5/8" DIA. INLET HOLE

M95HV $126.98 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMPW/5/8" DIA. INLET HOLE

M134 $95.29 1982-1986 ALL W/3/4" DIA. INLET HOLE

M134 $95.29 1990 2ND DES. W/3/4" DIA. INLET HOLE

M134 $95.29 1991-1993

M134HV $128.62 HI VOL PUMP (20% ADDL VOL OF OIL) W/3/4" DIA. INLET HOLE

Pump Kit K95B $52.41 EXC. HI VOL

Screen Assy 244S $26.84 1984-1986 2WD W/3/4" DIA. PICK-UP TUBE

244S $26.84 1990 2WD W/3/4" DIA. PICK-UP TUBE

244S $26.84 1991-1993

245S $15.80 1982-1986 4WD W/3/4" DIA. PICK-UP TUBE

95S4 $15.68 1982-1990 2WD W/5/8" DIA. PICK-UP TUBE

95S5 $17.25 1982-1989 4WD W/5/8" DIA. PICK-UP TUBE

Intermediate Shaft IS95 $8.89 -

Nylon Shaft Guide M55024 $0.67 -

Camshaft CCS30 $61.77 1982-1985 HYD.

MC1290 $203.52 1986-1993 HYD.

Camshaft Lifter Kit CLCCS30 $151.47 1982-1985 KIT INCLUDES 1-[CCS-30] CAM, 12-[JB-2095] LIFTERS & 4OZ MELL LUBE

CLMC1290 $238.36 1986-1993 KIT INCLUDES 1-[MC1290] CAM, 12-[JB-2095] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC5 $152.42 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH.

Torque Cam Lifter Kit CLMTC5 $219.29 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-5] CAM, 12-[JB-2095] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CHECK FOR COIL BIND. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CAM LIFT .280 INT. .295 EXH.

Mell Lube M10012 $4.93 -

Lifters JB2095 $5.90 HYD.

Push Rods MPR342 $2.56 -

Intake Valve V1395 $5.42 1982-1985 Head Dia. 1.600

V1481 $9.03 1986-1993 Head Dia. 1.718

Exhaust Valve V1394 $6.90 1982-1985 Head Dia. 1.307

V1480 $11.64 1986-1993 Head Dia. 1.425

Valve Springs VS590 $2.75 -

Valve Locks VL200 $1.21 -

Rocker Arms MR864 $8.00 -

Rocker Arm Kit MRK407 $9.87 KIT INCLUDES 1-[MR-864], 1-[MRM-1721], 1-[MRM-1720] & 1-[MRM-1723]

Rocker Arm Ball MRM1721 $0.67 -

Rocker Arm Nut MRM1720 $1.84 -

Rocker Arm Stud MRDS948 $3.77 57MM OVERALL LENGTH, 10MM DIAMETER WITH HEX NUT

Chain 373 $31.78 64 LINKS

Cam Sprocket S506 $8.95 40 TEETH

Crank Sprocket S511 $10.26 20 TEETH

Damper BD59 $7.62 -

3pc Timing Set 3-373S $44.35 INCLUDES [373], [S506] & [S511]

Page 395.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

19 194. (OHV) ENG - 1963-66 - 6 Cyl. - 3 9/16 Bore (CHEVY 1963-66) (GMC 1964-66)

- Oil Pump M62 $57.10 -

M62HV $133.39 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62S3 $50.75 1965-1966

Camshaft CCS18 $149.40 HYD.

Camshaft Lifter Kit CLCCS18 $244.80 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR317 $2.27 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 Head Dia. 1.500 HIGH ALLOY STEEL

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Springs VS170 $4.45 W/ROTOCAPS

VS390 $5.22 W/O ROTOCAPS

Valve Locks VL200 $1.21 -

Rocker Arms MR844 $5.22 -

Rocker Arm Kit MRK402 $6.74 KIT INCLUDES 1-[MR-844], 1-[MRM-1783] & 1-[MRM-1786]

Rocker Arm Ball MRM1783 $1.66 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Cam Gear 2524 $57.16 2542 $57.11 54 TEETH FIBER

Crank Gear 2501 $21.41 27 TEETH

Gear Set 2525S $96.80 INCLUDES [2524] & [2501]

20 200 (OHV) ENG - 1978-79 - V6 - 3 1/2 Bore

- Oil Pump M55 $41.17 M55HV $55.59 5/8" SCREEN INLET STANDARD VOLUME

HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 5/8" SCREEN INLET STANDARD VOLUME

Screen Assy 55S1 $14.18 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS41 $65.95 HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V1372 $8.73 Head Dia. 1.600

Exhaust Valve V1371 $8.06 Head Dia. 1.380

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D.

Continued on Next Page

Page 396.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

20 200 (OHV) ENG - 1978-79 - V6 - 3 1/2 Bore (Continued)

- Cam Sprocket S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S505 $25.36 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-499SA $42.72 INCLUDES [499], [S390] & [S505]

Expansion Plug Kits MPE169 $8.22 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169B $20.98 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169BR $22.04 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169R $10.89 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

21 3.4-F (207) OHV ENG - 2005-09 - 6 Cyl. - 3.62 Bore (EQUINOX LS,LT)

- Oil Pump M134 $95.29 -

M134HV $128.62 HI VOL PUMP (20% ADDL VOL OF OIL)

Pump Kit K95B $52.41 EXCLUDES HI VOL

Screen Assy 251S $18.94 -

Nylon Shaft Guide M55024 $0.67 -

Mell Lube M10012 $4.93 -

Lifters JB2270 $18.84 HYD. ROLLER

Push Rods MPR474 $3.12 2005-2006 EXHAUST

MPR475 $3.12 2005-2006 INTAKE

Valve Locks VL760 $1.22 -

Rocker Arms MR933 $27.30 2005

Chain 700 $49.08 2005-2007 80 LINKS

Cam Sprocket S848 $36.46 2005-2007 50 TEETH

Crank Sprocket S847 $28.40 25 TEETH

3pc Timing Set 3-700S $101.70 2005-2007 INCLUDES [700], [S847], [S848]

22 3.5-6 (211) DOHC ENG - 2004-06 - 5 Cyl. - 3.66 Bore (CANYON,COLORADO)

- Pump Kit K322 $169.99 -

Mell Lube M10012 $4.93 -

23 216 ENG - 1942-53 - 6 Cyl. - 3 1/2 Bore (CHEVY ONLY)

- Oil Pump M11 $247.94 -

Mell Lube M10012 $4.93 -

Mechanical Lifters JB887 $41.26 MECHANICAL USE WITH CAST IRON CAMSHAFT

Push Rods MPR30 $9.22 1942-1953

Intake Valve V0199 1948-1953 Head Dia. 1.641

Exhaust Valve V0400 $7.41 1950-1953 Head Dia. 1.500

Valve Locks VL200 $1.21 -

Cam Gear 2514 $54.00 1942-1953 54 TEETH ALUM.

Crank Gear 2501 $21.41 1942-1953 27 TEETH

Gear Set 2516S $101.65 1942-1953 INCLUDES [2514] & [2501]

Page 397.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

24 229 (OHV) ENG - 1980-84 - V6 - 3.736 Bore

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 55S1 $14.18 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS27 $117.49 HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V1393 $8.25 Head Dia. 1.840

Exhaust Valve V1192 $8.32 Head Dia. 1.500

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S505 $25.36 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-499SA $42.72 INCLUDES [499], [S390] & [S505]

Expansion Plug Kits MPE169 $8.22 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169B $20.98 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169BR $22.04 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

MPE169R $10.89 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 95 BLOCK, (1) MPC-282 $0.46 BLOCK, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-567, MPP-637 $0.59

25 230 (OHV) ENG - 1963-69 - 6 Cyl. - 3 7/8 Bore

- Oil Pump M62 $57.10 -

M62HV $133.39 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62S3 $50.75 1965-1969

Camshaft CCS18 $149.40 HYD.

Camshaft Lifter Kit CLCCS18 $244.80 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR317 $2.27 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 .015 OVERSIZE VALVE

Continued on Next Page

Page 398.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

25 230 (OHV) ENG - 1963-69 - 6 Cyl. - 3 7/8 Bore (Continued)

- Intake Valve V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 Head Dia. 1.500 HIGH ALLOY STEEL

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Springs VS170 $4.45 W/ROTOCAPS

VS390 $5.22 W/O ROTOCAPS

Valve Locks VL200 $1.21 -

Rocker Arms MR844 $5.22 -

Rocker Arm Kit MRK402 $6.74 INCLUDES 1-[MR-844], 1-[MRM-1783] & 1-[MRM-1786]

Rocker Arm Ball MRM1783 $1.66 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Cam Gear 2524 $57.16 54 TEETH ALUM.

2542 $57.11 54 TEETH FIBER

Crank Gear 2501 $21.41 27 TEETH

Gear Set 2525S $96.80 INCLUDES [2524] & [2501]

26 231 (OHV) ENG - 1978-84 - V6 - 3.800 Bore

- Retainers MRM1724 $0.89 -

Pump Kit K20I $30.15 REPAIR KIT FOR STANDARD VOLUME OIL PUMPS

K20IHV $76.32 HI Vol Kit. Provides 29% greater volume. This is a complete kit that includes longer gears,spacer,gaskets,springs & instructions. May require removing timing cover for installation. Requires hand tools & drill (Drill bit included) to install.

K20IPHV $141.27 INCLUDES [K-20IHV] & [P-20I] THRUST PLATE KIT

Gear Thrust Plate P20I $36.51 PROVIDES NEW WEARING SURFACE FOR OUR [K-20I], [K- 20IHV], [K-20J] & [K-20JHV] OIL PUMP KIT. [P-20I] KIT INCLUDES CAST IRON THRUST PLATE, MOUNTING GASKET, PROPER LENGTH SCREWS & INSTRUCTION SHEET

Screen Assy 20IS1 $26.86 1978-1980 1ST DES. W/4.5" DEEP OIL PAN

20IS2 $28.54 1981-1984 2ND DES. W/5.25" DEEP OIL PAN

Camshaft SBC12 $106.43 1979-1984 HYD.

SBC13 $115.85 1978 HYD.

Camshaft Lifter Kit CLSBC12 $162.12 1979-1984 KIT INCLUDES 1-[SBC-12] CAM, 12-[JB-969] LIFTERS & 4OZ MELL LUBE

CLSBC13 $150.60 1978 KIT INCLUDES 1-[SBC-13] CAM, 12-[JB-969] LIFTERS & 4OZ MELL LUBE

Mell Lube M10012 $4.93 -

Lifters JB969 $6.81 HYD.

Push Rods MPR103B $2.50 STANDARD SIZE

MPR387 $3.83 .035 O/S

MPR389 $2.62 .060 O/S

Intake Valve V1353 $4.42 1978 Head Dia. 1.625

V1388 $6.00 1979-1984 Head Dia. 1.710

Exhaust Valve V1363 $7.52 1978 Head Dia. 1.425

V1389 $14.10 1979-1984 Head Dia. 1.500

Valve Springs VS1050 $2.26 INT.

VS2219 $2.90 EXH. W/DAMPER

VS490 $1.76 EXH. W/O DAMPER

Valve Locks VL200 $1.21 -

Rocker Arms MR813 $3.51 RIGHT HAND

MR814 $3.80 LEFT HAND

Rocker Arm Kit MRK542-L $5.52 KIT INCLUDES 1-[MR-814] & 1-[MRM-1724] LEFT HAND

MRK542-R KIT INCLUDES 1-[MR-813] & 1-[MRM-1724] RIGHT HAND

Continued on Next Page

Page 399.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

26 231 (OHV) ENG - 1978-84 - V6 - 3.800 Bore (Continued)

- Chain 359 $18.87 54 LINKS

Cam Sprocket S610 $9.08 40 TEETH

Crank Sprocket S323 $7.81 20 TEETH

Damper BD44 $5.93 RIGHT HAND W/SPRING

BD45 $4.36 1978-1981 LEFT HAND

3pc Timing Set 3-359SB $30.04 INCLUDES [359], [S610] & [S323]

Expansion Plug Kits MPE137 $8.08 CARDED, STEEL KIT INCLUDES (4) MPC-25 $0.49 HEAD, (2) MPC-54 $0.29 OIL GALLEY, (4) MPC-133 $0.62 BLOCK, (1) MPS-42 $0.92 CAMSHAFT, (1) MPS-172 $0.67 CAMSHAFT, (2) MPP-567 $0.45 STANDARD KIT

MPE137B $14.92 CARDED, BRASS KIT INCLUDES (2) MPC-54 $0.29 OIL GALLEY, (4) MPC-133-B BLOCK, (1) MPS-42 $0.92 CAMSHAFT, (1) MPS-172 $0.67 CAMSHAFT, (4) MPC-25-B, (2) MPP-567 $0.45 STANDARD KIT

MPE137BR $14.17 BAGGED, BRASS KIT INCLUDES (2) MPC-54 $0.29 OIL GALLEY, (4) MPC-133-B BLOCK, (1) MPS-42 $0.92 CAMSHAFT, (1) MPS-172 $0.67 CAMSHAFT, (4) MPC-25-B, (2) MPP-567 $0.45 STANDARD KIT

MPE137R $8.12 BAGGED, STEEL KIT INCLUDES (4) MPC-25 $0.49 HEAD, (2) MPC-54 $0.29 OIL GALLEY, (4) MPC-133 $0.62 BLOCK, (1) MPS-42 $0.92 CAMSHAFT, (1) MPS-172 $0.67 CAMSHAFT, (2) MPP-567 $0.45 STANDARD KIT

MPE637 $10.61 CARDED, STEEL KIT INCLUDES (4) MPC-25 $0.49 BLOCK, (2) MPC- 54, (4) MPC-30, (3) MPS-42, (1) MPS-172 $0.67 DEEP PLUG KIT - HEAD

MPE637B $13.72 CARDED, BRASS KIT INCLUDES (4) MPC-25B $1.62 BLOCK, (2) MPC- 54, (4) MPC-30B, (3) MPS-42, (1) MPS-172 $0.67 DEEP PLUG KIT - HEAD

MPE637BR $14.25 BAGGED, BRASS KIT INCLUDES (4) MPC-25B $1.62 BLOCK, (2) MPC- 54, (4) MPC-30B, (3) MPS-42, (1) MPS-172 $0.67 DEEP PLUG KIT - HEAD

MPE637R $5.18 BAGGED, STEEL KIT INCLUDES (4) MPC-25 $0.49 BLOCK, (2) MPC- 54, (4) MPC-30, (3) MPS-42, (1) MPS-172 $0.67 DEEP PLUG KIT - HEAD

MPE717 $8.02 CARDED, STEEL KIT INCLUDES (6) MPC-30 $0.62 BLOCK, (2) MPS- 42, (2) MPC-54, (5) MPP-567 $0.45 DEEP PLUG KIT - BLOCK

MPE717B $18.46 CARDED, BRASS KIT INCLUDES (6) MPC-30B $2.89 BLOCK, (2) MPS- 42B, (2) MPC-54, (5) MPP-567 $0.45 DEEP PLUG KIT - BLOCK

MPE717BR $14.17 BAGGED, BRASS KIT INCLUDES (6) MPC-30B $2.89 BLOCK, (2) MPS- 42B, (2) MPC-54, (5) MPP-567 $0.45 DEEP PLUG KIT - BLOCK

MPE717R $5.72 BAGGED, STEEL KIT INCLUDES (6) MPC-30 $0.62 BLOCK, (2) MPS- 42, (2) MPC-54, (5) MPP-567 $0.45 DEEP PLUG KIT - BLOCK

Page 400.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

27 235 ENG - 1941-62 - 6 Cyl. - 3 9/16 Bore (CHEVY ONLY)

- Oil Pump M11 $247.94 1941-1953 EXC. P.G.

M29 $204.92 1953 W/P.G

M29 $204.92 1954

M45 $163.58 1955-1962

Camshaft CCS1 $187.52 1954-1955 W/MECH. LIFTERS- CAST IRON

CCS1 $187.52 1958 FORWARD CONTROL & DOUBLE DUTY 2ND DES. MECH.- CAST IRON

CCS1 $187.52 1959-1962 W/MECH. LIFTERS- CAST IRON

CCS29 $111.95 1956-1957

CCS29 $111.95 1958 EXC. FORWARD CONTROL & DOUBLE DUTY 2ND DES. MECH.- CAST IRON

CCS5 $192.39 1954-1955 W/HYD. LIFTERS

CCS6 $230.49 1960-1961 W/HYD. LIFTERS

Mell Lube M10012 $4.93 -

Lifters JB761 $39.64 1960-1961 HYD. W/ POWERGLIDE

JB874 $25.22 1956-1962 MECH.

JB887 $41.26 1941-1955 MECH. EXCLUDES POWERGLIDE USE WITH CAST
IRON CAMSHAFT

Push Rods MPR31 $9.38 1941-1954

MPR32 $9.48 1955-1962

Intake Valve V0199 1948-1949 Head Dia. 1.641

V0308 $10.14 1953-1962 Head Dia. 1.875

Exhaust Valve V0400 $7.41 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Locks VL200 $1.21 -

Cam Gear 2500 $58.59 54 TEETH FIBER

2514 $54.00 54 TEETH ALUM.

Crank Gear 2501 $21.41 27 TEETH

Gear Set 2516S $101.65 INCLUDES [2514] & [2501]

Expansion Plug Kits MPE103 $8.29 CARDED, STEEL KIT INCLUDES (2) MPC-41 $0.75 BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103B $9.40 CARDED, BRASS KIT INCLUDES (2) MPC-41-B BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103BR $9.43 BAGGED, BRASS KIT INCLUDES (2) MPC-41-B BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103R $5.80 BAGGED, STEEL KIT INCLUDES (2) MPC-41 $0.75 BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

28 248 ENG - 1939-55 - 6 Cyl. - 3 23/32 Bore (GMC ONLY)

- Oil Pump M23A $255.80 REPLACES OEM #2224845 PUMP W/2138171 COVER

M23B $185.89 REPLACES OEM #2224845 PUMP W/2324470 COVER

Camshaft SGM1 MECH.

Mell Lube M10012 $4.93 -

Mechanical Lifters JB887 $41.26 MECHANICAL

Push Rods MPR31 $9.38 1955

Intake Valve V0950 $10.27 1939-1953 Head Dia. 1.641

Exhaust Valve V0359 $14.36 1954-1955 Head Dia. 1.468

Valve Locks VL200 $1.21 -

Cam Gear 2500 $58.59 54 TEETH FIBER

2514 $54.00 54 TEETH ALUM.

Page 401.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

29 250 ENG - 1966-84 - 6 Cyl. - 3 7/8 Bore

- Oil Pump M62 $57.10 -

M62HV $133.39 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62S3 $50.75 -

Camshaft CCS18 $149.40 1966-1971 HYD.

CCS18 $149.40 1973-1974 HYD.

CCS18 $149.40 1975-1978 C1 PICK-UP W/H.D. CHASSIS

CCS18 $149.40 1975-1978 HYD. C1 SUBURBAN

CCS18 $149.40 1975-1978 HYD. PICK-UP, BLAZER & JIMMY 4WD

CCS18 $149.40 1976-1978 HYD. BLAZER & JIMMY 2WD Hyd.

CCS18 $149.40 1981-1982 HYD. C, K, G 1, 2 W/FEDERAL EMISSION

CCS18 $149.40 1983-1984 HYD.

CCS26 $205.71 1972 HYD. 10, 20 & 30 SERIES W/Calif.

CCS26 $205.71 1975 HYD. JIMMY 2WD W/CALIF.

CCS26 $205.71 1975-1978 HYD. C1 PICK-UP W/O H.D. CHASSIS

CCS26 $205.71 1975-1978 HYD. G10, 15 VAN W/CALIF.

CCS26 $205.71 1978 C2 PICK-UP & G2, 3 VAN Calif. Emissions

CCS26 $205.71 1979-1980 Calif. Emissions

CCS26 $205.71 1981-1982 C, G 1, 2 W/CALIF. EMISSION

CCS26 $205.71 1981-1982 G3 VAN Calif. Emissions

Camshaft Lifter Kit CLCCS18 $244.80 1966-1971 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS18 $244.80 1973-1974 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS18 $244.80 1975-1978 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C10 PICK-UP W/H.D. CHASSIS

CLCCS18 $244.80 1975-1978 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C10 SUBURBAN

CLCCS18 $244.80 1975-1978 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. PICK-UP, BLAZER & JIMMY W/4WD

CLCCS18 $244.80 1976-1978 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. BLAZER & JIMMY 2WD

CLCCS18 $244.80 1981-1982 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C,K,G,1,2 W/ FEDERAL EMISSION

CLCCS18 $244.80 1983-1984 KIT INCLUDES 1-[CCS-18] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS26 $243.08 1972 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. 10, 20 & 30 SERIES W/Calif.

CLCCS26 $243.08 1975 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. JIMMY 2WD & CALIF.

CLCCS26 $243.08 1975-1978 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C1 PICK-UP W/O H.D. CHASSIS

CLCCS26 $243.08 1975-1978 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. G10, 15 VAN W/CALIF.

CLCCS26 $243.08 1978 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C20 PICK-UP, G20, 30 VAN W/CALIF.

CLCCS26 $243.08 1979-1980 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. W/CALIF.

CLCCS26 $243.08 1981-1982 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. C10, 20 & G10, 20 W/CALIF.

CLCCS26 $243.08 1981-1982 KIT INCLUDES 1-[CCS-26] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. G30 VAN W/CALIF.

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR317 $2.27 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL EXC. LPG ENG.

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE - EXC. LPG ENG.

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE - EXC. LPG ENG.

Exhaust Valve V1192 $8.32 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V1192]

Valve Springs VS170 $4.45 1975-1984 HEAD & MANIFOLD AS ONE UNIT

VS390 $5.22 1966-1979 HEAD & MANIFOLD AS SEPARATE UNITS

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 1971-1977 SPRINT ONLY

MR844 $5.22 EXC. SPRINT

Continued on Next Page

Page 402.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

29 250 ENG - 1966-84 - 6 Cyl. - 3 7/8 Bore (Continued)

- Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786] SPRINT

MRK402 $6.74 KIT INCLUDES 1-[MR-844], 1-[MRM-1783] & 1-[MRM-1786] EXC. SPRINT

Rocker Arm Ball MRM1731 $0.80 1971-1977 SPRINT

MRM1783 $1.66 1967-1984 EXC. SPRINT

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Cam Gear 2524 $57.16 54 TEETH ALUM. 1966 TO EARLY 76 W/GEAR STAMPED #14

2526 $47.64 54 TEETH LATE 1976-84 W/GEAR STAMPED #20

2542 $57.11 54 TEETH FIBER 1966 TO EARLY 76 W/GEAR STAMPED #14

Crank Gear 2501 $21.41 1966-1976 27 TEETH W/INT. MANIFOLD & CYL. HEAD CAST
SEPARATE

2527 $26.82 1976-1984 27 TEETH H.D. W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE

2537 $39.58 27 TEETH 1975 TO EARLY 76 W/GEAR STAMPED #71 AND
INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD

Gear Set 2525S $96.80 1966-1976 INCLUDES [2524] & [2501] W/INT. MANIFOLD & CYL. HEAD CAST SEPARATE

2528S $95.29 1976-1984 ALUM. CAM GEAR & STEEL CRANK GEAR H.D. W/INTAKE MANIFOLD & CYL. HEAD CAST SEPARATE

2538S $61.95 ALUM. INCLUDES [2524] & [2537] 1975 TO EARLY 76 W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD

2540S $53.87 INCLUDES [2526] & [2541] LATE 1976-84 W/INTAKE MANIFOLD CAST AS INTEGRAL PART OF CYL. HEAD

30 4.2-S (256) ENG - 2002-09 - 6 Cyl. - 3.66 Bore (ENVOY, XL, XUV) (TRAILBLAZER, EXT) VORTEC

- Pump Kit K322 $169.99 2002-2008 MANUFACTURED FOR THE 2ND DESIGN PICK UP TUBE ASSEMBLY, DO NOT REUSE OLD COVER OR PICK UP TUBE ASSEMBLY

Screen Assy 339S $49.12 2002 1ST DESIGN WITH O RING SEAL. NOT FOR USE WITH K322 $169.99 OIL PUMP KIT.

358S $52.23 2003-2008 2ND DESIGN WITH FACE SEAL, USE WITH K322 $169.99 OIL PUMP KIT

Mell Lube M10012 $4.93 -

31 261 ENG - 1954-62 - 6 Cyl. - 3 3/4 Bore (CHEVY ONLY)

- Oil Pump M45 $163.58 -

Camshaft CCS29 $111.95 MECH.

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 1956-1962 MECH.

JB887 $41.26 1954-1955 MECH. EXCLUDES POWERGLIDE USE WITH CAST IRON CAMSHAFT

Push Rods MPR31 $9.38 1954

MPR32 $9.48 1955-1962

Intake Valve V0308 $10.14 Head Dia. 1.875

Exhaust Valve V0400 $7.41 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Locks VL200 $1.21 -

Cam Gear 2500 $58.59 54 TEETH FIBER

2514 $54.00 54 TEETH ALUM.

Crank Gear 2501 $21.41 27 TEETH

Gear Set 2516S $101.65 INCLUDES [2514] & [2501]

Expansion Plug Kits MPE103 $8.29 CARDED, STEEL KIT INCLUDES (2) MPC-41 $0.75 BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103B $9.40 CARDED, BRASS KIT INCLUDES (2) MPC-41-B BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103BR $9.43 BAGGED, BRASS KIT INCLUDES (2) MPC-41-B BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

MPE103R $5.80 BAGGED, STEEL KIT INCLUDES (2) MPC-41 $0.75 BLOCK, (4) MPC- 54 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (2) MEP-26 $0.94 BLOCK, (4) MPP-554 $0.38

Page 403.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

32 4.3-B (262) ENG - 1990-91 - V6 - 4.000 Bore (ASTRO, SAFARI)

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 NOT FOR USE WITH HIGH VOLUME PUMP

Screen Assy 55S2 $15.77 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE WITH IS-55G $14.21 SHAFT

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER

Push Rods MPR373 $2.45 -

Intake Valve V1195 $6.81 Head Dia. 1.940

Exhaust Valve V1192 $8.32 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL STELLITE

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 NON ADJ.

Rocker Arm Stud MRDS921 $4.64 .003 O/S NON-ADJUSTABLE

Chain 506 $20.15 46 LINKS

Cam Sprocket S732 $17.41 36 TEETH

Crank Sprocket S505 $25.36 18 TEETH

3pc Timing Set 3-506SB $49.23 INCLUDES [506], [S732] & [S505]

Page 404.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

33 4.3-N (262) ENG - 1985-86 - V6 - 4.000 Bore

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 55S2 $15.77 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS35 $166.89 HYD.

Camshaft Lifter Kit CLCCS35 $256.00 KIT INCLUDES 1-[CCS-35] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V1195 $6.81 Head Dia. 1.940

Exhaust Valve V1192 $8.32 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V1192]

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 506 $20.15 46 LINKS

Cam Sprocket S390 $10.41 36 TEETH

Crank Sprocket S505 $25.36 18 TEETH

Expansion Plug Kits MPE185 $8.09 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185B $21.60 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185BR $23.72 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185R $14.20 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

Page 405.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

34 4.3-W (262) OHV ENG - 1992-02 - V6 - 4.000 Bore INCLUDES VANS

- Oil Pump M55 $41.17 1992 5/8" SCREEN INLET STANDARD VOLUME

M55 $41.17 1993 5/8" SCREEN INLET STANDARD VOLUME 2WD MINIVAN

M55 $41.17 1993 5/8" SCREEN INLET STANDARD VOLUME S10, SONOMA, BLAZER, JIMMY

M55HV $55.59 1992-1993 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

M155 $58.59 1993 3/4" SCREEN INLET STANDARD VOLUME 2WD MINIVAN

M155 $58.59 1994-2002 3/4" SCREEN INLET STANDARD VOLUME

M155HV $76.26 1994-2002 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET

Pump Kit K55 $38.10 NOT FOR USE WITH HIGH VOLUME PUMP

Screen Assy 210S $25.33 1992-1993 4WD S10 BLAZER, SONOMA, JIMMY & AWD MINIVAN

211S $26.93 1994-1995 4WD S10, SONOMA, BLAZER, JIMMY, MINIVAN

213S $23.69 1993 2WD MINIVAN W/3/4" DIA. OIL PICKUP SCREEN

213S $23.69 1994-1995 2WD MINIVAN

220S $22.20 1992-1993 2WD S10 BLAZER, SONOMA, JIMMY

221S $18.84 1994-1995 2WD S10 BLAZER, SONOMA, JIMMY

258S $37.94 1996-2002 2WD & 4WD C1500, K1500, SIERRA, SILVERADO

258S $37.94 1996-2002 2WD S10, SONOMA, BLAZER, P30, JIMMY

259S $23.71 1996-2001 2WD & 4WD MINIVANS

259S $23.71 1996-2002 4WD S10, SONOMA, BLAZER, JIMMY

55S2 $15.77 1992-1993 2WD MINIVAN W/5/8" DIA. OIL PICKUP SCREEN

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft MC1275 $433.93 1992-1995 HYD. ROLLER

MC1315 $462.48 1996-2002 HYD. ROLLER

Camshaft Lifter Kit CLMC1275 $515.10 1992-1995 KIT INCLUDES 1-[MC1275] CAM, 12-[JB-2079] LIFTERS & 4OZ MELL

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER

Push Rods MPR373 $2.45 1992-1995

MPR615 $3.88 1996-2002

Intake Valve V1195 $6.81 1992-1995 Head Dia. 1.940

V1931 $8.32 1996-2002 Head Dia. 1.940

Exhaust Valve V1192 $8.32 1992-1995 Head Dia. 1.500

V1807 $9.62 1996-2002 Head Dia. 1.500 EXC. P3 VAN

Valve Springs VS2229 $2.39 1996-2002

Valve Spring with Hydraulic Lifters VS380 $3.24 1992-1995 STANDARD REPLACEMENT

VS739R $5.10 1992-1995 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR926 $6.03 1992-2000

Rocker Arm Kit MRK651 $5.95 1992-2000 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM- 1786] W/PRESS IN ROCKER STUDS, (ADJUSTABLE) ENGLISH THREADS

MRK652 $7.92 1992-2000 KIT INCLUDES 1-[MR-926], 1-[MRM-1721] & 1-[MRM- 1723] W/SCREW IN ROCKER STUDS, (NON-
ADJUSTABLE) METRIC THREADS

Rocker Arm Ball MRM1721 $0.67 1992-2000 USE W/METRIC THREADED ROCKER ARM STUDS

MRM1731 $0.80 1992-1996 USE W/PRESS IN ROCKER ARM STUDS

Rocker Arm Nut MRM1723 $0.92 1992-2001 USE W/THREADED ROCKER ARM STUDS-
(NONADJUSTABLE) METRIC THREADS

MRM1786 $0.72 1992-1996 USE W/PRESS IN ROCKER ARM STUDS- (ADJUSTABLE), ENGLISH THREADS

Rocker Arm Stud MRDS921 $4.64 1992-1996 .003 O/S PRESS IN ROCKER ARM STUDS-
(ADJUSTABLE), ENGLISH THREADS

Chain 509 $29.01 1992-1998 46 LINKS

8MMSRH72 $31.59 1999-2002 72 LINKS

Cam Sprocket S776 $39.65 1992-1998 36 TEETH

S836 $34.74 1999-2002 56 TEETH

Crank Sprocket S505 $25.36 1992-1998 18 TEETH

S835 $14.25 1999-2002 28 TEETH

Tensioner BT5452 $46.01 1999-2002 FOR USE WITH 3-8MMSRH72S $53.89 TO ELIMINATE RATTLE. USE WITH GM COVER #89017259

3pc Timing Set 3-509S $68.15 1992-1998 INCLUDES [509], [S776] & [S505]

3-8MMSRH72S $53.89 1999-2002 INCLUDES [8MMSRH72], [S835], [S836] USE BT5452 $46.01 AND GM COVER #89017259 WITH THIS SET TO ELIMINATE RATTLE.

Page 406.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

35 4.3-X (262) ENG - 1996-10 - V6 - 4.00 Bore (INCLUDES VANS) VORTEC

- Oil Pump M155 $58.59 1996-2008 3/4" SCREEN INLET STANDARD VOLUME

M155HV $76.26 1996-2008 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET

Pump Kit K55 $38.10 1996-2008 EXC. HI VOL

Screen Assy 258S $37.94 1996-2005 2WD S10, SONOMA, BLAZER (EXC JIMMY)

258S $37.94 2002-2008 EXPRESS 1500, 2500, SAVANNAH, SIERRA, SILVERADO

259S $23.71 1996-2005 4WD S10, SONOMA, BLAZER (EXC JIMMY)

259S $23.71 2002-2005 ASTRO, SAFARI MINIVANS

Intermediate Shaft IS55E $15.73 1996-2008 MANUFACTURED WITH STEEL SHAFT GUIDEELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 1996-2008 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 1996-2008 USE W/[IS-55G]

Camshaft MC1315 $462.48 2003-2005 HYD. ROLLER

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 1996-2008 HYD. ROLLER

Push Rods MPR615 $3.88 1996-2008

Intake Valve V1931 $8.32 1996-2008 Head Dia. 1.940

Exhaust Valve V1807 $9.62 1996-2008 Head Dia. 1.500

Valve Springs VS2229 $2.39 1996-2008

Valve Locks VL200 $1.21 1996-2008

Rocker Arms MR926 $6.03 1996-2006

Rocker Arm Kit MRK651 $5.95 1996-2005 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM- 1786] W/PRESS IN ROCKER STUDS, (ADJUSTABLE) ENGLISH THREADS

MRK652 $7.92 1996-2005 KIT INCLUDES 1-[MR-926], 1-[MRM-1721] & 1-[MRM- 1723] W/SCREW IN ROCKER STUDS, (NON-ADJUSTABLE) METRIC THREADS

Rocker Arm Ball MRM1721 $0.67 1996-2005 USE W/METRIC THREADED ROCKER ARM STUDS

MRM1731 $0.80 1996-2005 USE W/PRESS IN ROCKER ARM STUDS

Rocker Arm Nut MRM1723 $0.92 1996-2005 USE W/THREADED ROCKER ARM STUDS- (NONADJUSTABLE) METRIC THREADS

MRM1786 $0.72 1996-2005 USE W/PRESS IN ROCKER ARM STUDS- (ADJUSTABLE), ENGLISH THREADS

Rocker Arm Stud MRDS921 $4.64 1996-2005 .003 O/S PRESS IN ROCKER ARM STUDS- (ADJUSTABLE), ENGLISH THREADS

Chain 509 $29.01 1996-1998 46 LINKS

8MMSRH72 $31.59 1999-2008 72 LINKS

Cam Sprocket S776 $39.65 1996-1998 36 TEETH

S836 $34.74 1999-2008 56 TEETH

Crank Sprocket S505 $25.36 1996-1998 18 TEETH

S835 $14.25 1999-2008 28 TEETH

Tensioner BT5452 $46.01 2002-2003 FOR USE WITH 3-8MMSRH72S $53.89 TO ELIMINATE RATTLE. USE WITH GM COVER #89

3pc Timing Set 3-509S $68.15 1996-1998 INCLUDES [509], [S776] & [S505]

3-8MMSRH72S $53.89 1999-2008 INCLUDES [8MMSRH72], [S835], [S836] USE BT5452 $46.01 AND GM COVER #89017259 WITH THIS SET TO ELIMINATE RATTLE.

Page 407.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

36 4.3-Z (262) ENG - 1986-95 - V6 - 4.000 Bore INCLUDES VANS

- Oil Pump M55 $41.17 1986-1992 5/8" SCREEN INLET STANDARD VOLUME

M55 $41.17 1993-1994 5/8" SCREEN INLET STANDARD VOLUME W/5/8" DIA. INLET HOLE

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

M155 $58.59 1993-1994 3/4" SCREEN INLET STANDARD VOLUME W/3/4" DIA. INLET HOLE

M155 $58.59 1995 3/4" SCREEN INLET STANDARD VOLUME

M155HV $76.26 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 210S $25.33 1988-1993 4WD S10, SONOMA, BLAZER, JIMMY, AWD MINIVAN

210S $25.33 1991-1993 SYCLONE, TYPHOON WITH BALANCE SHAFT

211S $26.93 1994-1995 4WD S10, SONOMA, BLAZER, JIMMY, AWD MINIVAN

213S $23.69 1993-1995 C, K, P & G MODELS W/3/4" DIA. PICK-UP TUBE

213S $23.69 1994 2WD MINIVAN

220S $22.20 1988-1993 2WD S10, SONOMA, BLAZER, JIMMY

220S $22.20 1992-1993 TYPHOON WITHOUT BALANCE SHAFT

221S $18.84 1994-1995 2WD S10, SONOMA, BLAZER, JIMMY

55S2 $15.77 1986-1993 2WD MINIVAN

55S2 $15.77 1993-1994 C, K, P & G MODELS W/5/8" DIA. PICK-UP TUBE

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE Nylon Shaft Guide

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS35 $166.89 1986 HYD.

CCS38 $343.39 1987-1994 HYD. ROLLER; W/O BAL. SHAFT

MC1274 $416.41 1993-1995 W/BAL. SHAFT HYD. ROLLER

Camshaft Lifter Kit CLCCS35 $256.00 1986 KIT INCLUDES 1-[CCS-35] CAM, 12-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS38 $527.78 1987-1994 KIT INCLUDES 1-[CCS-38] CAM, 12-[JB-2079] LIFTERS & 4OZ MELL LUBE HYD. ROLLER; W/O BAL. SHAFT

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 1987-1995 HYD. ROLLER

JB817 $5.68 1986 HYD.

Push Rods MPR34B $1.83 1986

MPR373 $2.45 1987-1995

Intake Valve V1195 $6.81 Head Dia. 1.940

Exhaust Valve V1192 $8.32 1986-1990 Head Dia. 1.500 EXC. P3

V1192 $8.32 1991-1992 Head Dia. 1.500 BELOW 8500 G.V.W.

V1192 $8.32 1993-1995 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V1192]

V1294 $14.20 1990-1995 Head Dia. 1.500 P3

V1294 $14.20 1991-1992 Head Dia. 1.500 ABOVE 8500 G.V.W.

V1294 $14.20 1992-1995 Head Dia. 1.500 G3 ABOVE 8500 G.V.W.

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR926 $6.03 -

Rocker Arm Kit MRK651 $5.95 1987-1995 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM-1786] W/PRESS IN ROCKER STUDS, (ADJUSTABLE) ENGLISH THREADS

Continued on Next Page

Page 408.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

36 4.3-Z (262) ENG - 1986-95 - V6 - 4.000 Bore INCLUDES VANS (Continued)

- Rocker Arm Kit MRK652 $7.92 1992-1995 KIT INCLUDES 1-[MR-926], 1-[MRM-1721] & 1-[MRM- 1723] W/SCREW IN ROCKER STUDS, (NON-ADJUSTABLE) METRIC THREADS

Rocker Arm Ball MRM1721 $0.67 1992-1995 USE W/METRIC THREADED ROCKER ARM STUDS

MRM1731 $0.80 1986-1995 USE W/PRESS IN ROCKER ARM STUDS

Rocker Arm Nut MRM1723 $0.92 1992-1995 USE W/THREADED ROCKER ARM STUDS- (NONADJUSTABLE) METRIC THREADS

MRM1786 $0.72 1986-1995 USE W/PRESS IN ROCKER ARM STUDS- (ADJUSTABLE), ENGLISH THREADS

Rocker Arm Stud MRDS921 $4.64 1986-1995 .003 O/S PRESS IN ROCKER ARM STUDS- (ADJUSTABLE), ENGLISH THREADS

Chain 202 $22.04 1993 46 LINKS TYPHOON ROLLER CHAIN

506 $20.15 46 LINKS EXC. 1993 TYPHOON

Cam Sprocket S390 $10.41 1986 36 TEETH

S732 $17.41 1987-1992 36 TEETH

S732 $17.41 1993 36 TEETH L & M MINIVAN & C & K 1, 2

S732 $17.41 1993-1994 36 TEETH P3 & G1, 2, 3

S776 $39.65 1993-1995 36 TEETH S & T 10

S776 $39.65 1994 36 TEETH L & M MINIVAN

S776 $39.65 1994-1995 36 TEETH C & K 1, 2

S776 $39.65 1995 36 TEETH P3 & G1, 2, 3

Crank Sprocket S505 $25.36 18 TEETH EXC. 1993 TYPHOON

3pc Timing Set 3-506SB $49.23 1987-1992 INCLUDES [506], [S732] & [S505]

3-506SB $49.23 1993 INCLUDES [506], [S732] & [S505] L & M MINIVAN & C & K 1,2

3-506SB $49.23 1993-1994 INCLUDES [506], [S732] & [S505] P3 & G1, 2, 3

3-506SD $90.57 1993-1995 INCLUDES [506], [S776] & [S505] S & T 10

3-506SD $90.57 1994 INCLUDES [506], [S776] & [S505] L & M MINIVAN

3-506SD $90.57 1994-1995 INCLUDES [506], [S776] & [S505] C & K 1, 2

3-506SD $90.57 1995 INCLUDES [506], [S776] & [S505] P3 & G1, 2, 3

Expansion Plug Kits MPE185 $8.09 1986-1993 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185B $21.60 1986-1993 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185BR $23.72 1986-1993 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

MPE185R $14.20 1986-1993 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (1) MPC- 108 OIL GALLEY, (1) MPC-282 $0.46 OIL GALLEY, (1) MPC-95 $0.33 OIL GALLEY, (1) MPS-150 $0.95 CAMSHAFT, (3) MPP-490, (1) MPP-560, (1) MPP-567 $0.45

Page 409.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

37 265 ENG - 1955-57 - 8 Cyl. - 3 3/4 Bore (CHEVY ONLY)

- Oil Pump M46 $123.91 -

Intermediate Shaft IS46 $10.83 -

Camshaft CCS3 $227.20 HYD.

Camshaft Lifter Kit CLCCS3 $360.99 KIT INCLUDES 1-[CCS-3] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Springs VS110 $0.80 INT.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

505 $36.51 46 LINKS

Cam Sprocket S261 $18.95 36 TEETH

S288 $25.20 44 TEETH H.D.

Crank Sprocket S262 $22.02 18 TEETH

S289 $11.30 22 TEETH H.D.

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-489S $52.26 INCLUDES [505], [S261] & [S262]

Page 410.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

38 267 ENG - 1979-82 - 8 Cyl. - 3 1/2 Bore

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 55S1 $14.18 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS23 $117.56 1980-1982 HYD.

CCS24 $50.75 1979 HYD.

Camshaft Lifter Kit CLCCS23 $240.07 1980-1982 KIT INCLUDES 1-[CCS-23] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS24 $176.40 1979 KIT INCLUDES 1-[CCS-24] CAM, 16-[JB-817] LIFTERS &
4OZ MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V1371 $8.06 Head Dia. 1.380

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-499S $31.69 INCLUDES [499], [S390] & [S391]

39 270 ENG - 1941-63 - 6 Cyl. - 3 25/32 Bore (GMC ONLY)

- Oil Pump M23A $255.80 SERIES 100-300 INC. COVER

M23B $185.89 SERIES 300-500 INC. COVER

Camshaft SGM1 MECH.

Mell Lube M10012 $4.93 -

Mechanical Lifters JB887 $41.26 MECHANICAL

Push Rods MPR31 $9.38 1955-1961

Intake Valve V0950 $10.27 1941-1949 Head Dia. 1.641

Exhaust Valve V0359 $14.36 1954-1963 Head Dia. 1.468

Valve Locks VL200 $1.21 -

Cam Gear 2500 $58.59 54 TEETH FIBER

2514 $54.00 54 TEETH ALUM.

Page 411.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

40 283 ENG - 1957-67 - 8 Cyl. - 3 7/8 Bore (CHEVY 1957-67) (GMC 1967)

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL 1957-1964

Screen Assy. 55S $20.54 -

Screen Assy 55S1 $14.18 1965-1967

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 1963-1967 HYD.

CCS3 $227.20 1957-1962 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 1963-1967 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS3 $360.99 1957-1962 KIT INCLUDES 1-[CCS-3] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400]

Valve Springs VS110 $0.80 1957-1961 INT. ONLY

VS170 $4.45 1962-1966 INT. & EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 1967 STANDARD REPLACEMENT INT. & EXH.

VS739R $5.10 1967 CHROME VANADIUM INT. & EXH.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 1967 46 LINKS

505 $36.51 1957-1966 46 LINKS

Cam Sprocket S261 $18.95 1957-1966 36 TEETH

S288 $25.20 44 TEETH H.D.

S390 $10.41 1967 36 TEETH

Crank Sprocket S262 $22.02 1957-1966 18 TEETH

S289 $11.30 22 TEETH H.D.

S391 $5.37 1967 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-489S $52.26 1957-1966 INCLUDES [505], [S261] & [S262]

3-499S $31.69 1967 INCLUDES [499], [S390] & [S391]

Page 412.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

41 288 ENG - 1955-58 - 8 Cyl. - 3 3/4 Bore (GMC ONLY)

- Intermediate Shaft IS54A $11.11 -

Mell Lube M10012 $4.93 -

Valve Springs VS120 $1.43 OUTER

VS130 $4.31 INNER

Valve Locks VL200 $1.21 -

Chain 347 $20.45 60 LINKS

42 4.8-T (292) ENG - 1963-89 - 6 Cyl. - 4.000 Bore

- Oil Pump M62 $57.10 -

M62HV $133.39 HI VOL PUMP-20% ADDL VOL OF OIL THAN STOCK PUMP

Oil Pump Drive Gear DG62C $40.11 -

Screen Assy 62S6 $49.23 1968-1989

Camshaft CCS9 $185.84 HYD.

Camshaft Lifter Kit CLCCS9 $213.00 KIT INCLUDES 1-[CCS-9] CAM, 12-[J-817] LIFTERS & 4OZ MELL LUBE

Cam Thrust Plate Spacer MG221 $4.05 -

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR318 $2.34 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL EXC. LPG ENG.

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE - EXC LPG ENG

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE - EXC LPG ENG

Exhaust Valve V1206 $20.45 1963-1984 Head Dia. 1.500

V1206 $20.45 1985 Head Dia. 1.500 SERIES 10-35 W/H4D

V1646 $45.22 1985-1989 Head Dia. 1.500 SERIES 10-30

Valve Springs VS170 $4.45 -

Valve Locks VL200 $1.21 -

Rocker Arms MR844 $5.22 -

Rocker Arm Kit MRK402 $6.74 KIT INCLUDES 1-[MR-844], 1-[MRM-1783] & 1-[MRM-1786]

Rocker Arm Ball MRM1783 $1.66 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Cam Gear 2526 $47.64 1966-1989 54 TEETH

Crank Gear 2527 $26.82 1966-1989 27 TEETH

Gear Set 2528S $95.29 ALUM. CAM GEAR & STEEL CRANK GEAR REPLACE AS A SET ONLY- NOTE: IN 1963-65 IT MAY REQUIRE A NEW CRANKCASE FRONT COVER

Expansion Plug Kits MPE104 $6.92 1963-1985 CARDED, STEEL KIT INCLUDES (3) MPC-41 $0.75 BLOCK, (1) MPC-69 $1.07 BLOCK, (1) MPC-54 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-554 $0.38

MPE104B $13.78 1963-1985 CARDED, BRASS KIT INCLUDES (3) MPC-41-B BLOCK, (1) MPC-69-B BLOCK, (1) MPC-54 $0.29 OIL GALLEY, (1) MPS- 78 CAMSHAFT, (1) MPP-554 $0.38

MPE104BR $12.70 1963-1985 BAGGED, BRASS KIT INCLUDES (3) MPC-41-B BLOCK, (1) MPC-69-B BLOCK, (1) MPC-54 $0.29 OIL GALLEY, (1) MPS- 78 CAMSHAFT, (1) MPP-554 $0.38

MPE104R $6.46 1963-1985 BAGGED, STEEL KIT INCLUDES (3) MPC-41 $0.75 BLOCK, (1) MPC-69 $1.07 BLOCK, (1) MPC-54 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (1) MPP-554 $0.38

Page 413.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

43 4.8-A,C,V (294) OHV ENG - 1999-2010 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) INCLUDES VANS

-

Oil Pump M295 $96.88 STANDARD VOL AND PRESSURE PUMP. FOR HV OR HP PUMPS SEE PERFORMANCE SECTION

Screen Assy 324S $128.74 1999-2007

Screen Assy 324S $128.74 1999-2007 EXPRESS, SAVANA

Camshaft MC1383 $440.26 2000-2007 HYD. ROLLER (SIERRA, SILVERADO, TAHOE, YUKON)

MC1383 $440.26 2003-2007 HYD. ROLLER EXPRESS, SAVANA Mell Lube

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER EXPRESS, SAVANA

JB2079 $14.23 1999-2006 HYD. ROLLER SIERRA, SILVERADO, TAHOE, YUKON

JB2079 $14.23 2007-2009 HYD. ROLLER SIERRA, SILVERADO, TAHOE, YUKON (W/NON ACTIVE FUEL MANAGEMENT)

Intake Valve V1934 $9.25 1999-2007 Head Dia 1.890

Exhaust Valve V1935 $14.10 1999-2007 Head Dia. 1.550 EXCLUDES LPG

Valve Springs VS2254 $6.15 -

Valve Locks VL760 $1.22 -

Chain 3SR60 $18.92 1999-2004 60 LINKS

3SRH60 $18.91 60 LINKS

Cam Sprocket S826 $29.01 1999-2004 44 TEETH

S878 $33.22 2005-2006 44 TEETH RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN.

S878 $33.22 2007 44 TEETH EXPRESS, SAVANA 2500 $58.59 & 3500 ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN)

S894 $26.79 2007-2010 44 TEETH EXCLUDES 2007 EXPRESS, SAVANA 2500 $58.59 & 3500 (NON RELUCTOR STYLE CAM SPROCKET)

Crank Sprocket S827 $22.24 22 TEETH

3pc Timing Set 3-3SRH60S $74.59 2007-2010 INCLUDES [3SRH60], [S894] & [S827] EXCLUDES
2007 EXPRESS, SAVANA 2500 $58.59 & 3500

3-3SRH60SA $66.57 2005-2006 INCLUDES [3SRH60], [S878] & [S827] RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE

3-3SRH60SA $66.57 2007 INCLUDES [3SRH60], [S878] & [S827] EXPRESS, SAVANA
2500 $58.59 & 3500 ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE)

Expansion Plug Kits MPE827 $5.66 1999-2005 CARDED, STEEL KIT INCLUDES (1) MPC-41 $0.75 BLOCK, (1) MPC-201

MPE827R $1.73 1999-2005 BAGGED, STEEL KIT INCLUDES (1) MPC-41 $0.75 BLOCK, (1) MPC-201

44 302 ENG - 1952-59 - 6 Cyl. - 4.000 Bore (GMC ONLY)

- Oil Pump M23B $185.89 SERIES 300-500 INC. COVER

Camshaft SGM1 MECH.

Mell Lube M10012 $4.93 -

Mechanical Lifters JB887 $41.26 MECHANICAL

Push Rods MPR31 $9.38 -

Valve Locks VL200 $1.21 -

Cam Gear 2500 $58.59 54 TEETH FIBER

2514 $54.00 54 TEETH ALUM.

Page 414.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

45 305-A ENG - 1960-61 - V6 - 4 1/4 Bore (GMC ONLY)

- Oil Pump M70 $154.12 5/16" MOUNTING HOLES

M70C $84.16 305-A W/3/8" MOUNTING HOLES- DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES.

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS70E $14.44 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0578 $11.93 Head Dia. 1.563

Valve Locks VL200 $1.21 -

Crank Sprocket S313 24 TEETH

46 305-B ENG - 1960-65 - V6 - 4 1/4 Bore (GMC ONLY)

- Oil Pump M70 $154.12 -

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0580 $23.20 Head Dia. 1.565

Valve Locks VL200 $1.21 -

Crank Sprocket S313 24 TEETH

47 305-C ENG - 1960-74 - V6 - 4 1/4 Bore (CHEVY 1973-74) (GMC 1960-74)

- Oil Pump M70 $154.12 5/16" MOUNTING HOLES

M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES.

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0580 $23.20 Head Dia. 1.565

Valve Locks VL200 $1.21 -

Cam Sprocket S376 $31.17 1966 48 TEETH

Crank Sprocket S313 1960-1963 24 TEETH

3pc Timing Set 3-170S $86.14 1966 INCLUDES [170], [S376] & [S377]

3-170SA $83.50 1967-1974 INCLUDES [170], [S400] & [S377]

Expansion Plug Kits MPE121 $8.33 CARDED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121B $18.35 CARDED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121BR $15.84 BAGGED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38 "

MPE121R $9.03 BAGGED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

Page 415.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

48 305-D ENG - 1960-65 - V6 - 4 1/4 Bore (GMC ONLY)

- Oil Pump M70 $154.12 5/16" MOUNTING HOLES

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0578 $11.93 Head Dia. 1.563 STD. DUTY

V0580 $23.20 Head Dia. 1.565 H.D.

Valve Locks VL200 $1.21 -

Chain 166 $12.10 86 LINKS

49 305-E ENG - 1963-69 - V6 - 4 1/4 Bore (GMC ONLY)

- Oil Pump M70 $154.12 5/16" MOUNTING HOLES

M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES.

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0580 $23.20 Head Dia. 1.565 H.D.

V1119 $15.73 1968-1969 Head Dia. 1.567 STD. DUTY

Valve Locks VL200 $1.21 -

3pc Timing Set 3-170SA $83.50 INCLUDES [170], [S400] & [S377]

50 5.0 (305) OHV ENG - 1976-02 - 8 Cyl. - 3.74 Bore INCLUDES VANS

- Oil Pump M55 $41.17 1976-1992 5/8" SCREEN INLET STANDARD VOLUME W/5/8" DIA. PICK-UP TUBE

M55 $41.17 1993-1994 5/8" SCREEN INLET STANDARD VOLUME W/5/8" DIA. INLET HOLE

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

M155 $58.59 1993-1994 3/4" SCREEN INLET STANDARD VOLUME W/3/4" DIA. INLET HOLE

M155 $58.59 1995-2002 3/4" SCREEN INLET STANDARD VOLUME W/3/4" DIA. PICK-UP TUBE

M155HV $76.26 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 155S $20.53 1993-1994 W/3/4" DIA. PICK-UP TUBE

155S $20.53 1995-2002 W/3/4" DIA. PICK-UP TUBE

55S1 $14.18 1976-1992 W/5/8" DIA. PICK-UP TUBE

55S1 $14.18 1993-1994 W/5/8" DIA. PICK-UP TUBE

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Continued on Next Page

Page 416.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

50 5.0 (305) OHV ENG - 1976-02 - 8 Cyl. - 3.74 Bore INCLUDES VANS (Continued)

- Camshaft CCS23 $117.56 1981-1995 HYD.

CCS24 $50.75 1976-1980 HYD.

MC1320 $489.56 1996-2002 HYD. ROLLER

Camshaft Lifter Kit CLCCS23 $240.07 1981-1995 KIT INCLUDES 1-[CCS-23] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS24 $176.40 1976-1980 KIT INCLUDES 1-[CCS-24] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Camshaft Lifter Kits Using Hydraulic Lifters CLMC1320 $723.23 1996-2002 KIT INCLUDES 1-[MC1320] CAM, 16-[JB-2079] LIFTERS & 4 OZ MELL LUBE HYD. ROLLER

Torque Camshaft MTC1 $103.21 1976-1987 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 1976-1987 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1- [MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 1996-2002 HYD. ROLLER

JB817 $5.68 1976-1995 HYD.

Push Rods MPR34B $1.83 1976-1995

MPR615 $3.88 1996-2002

Intake Valve V0399 $4.12 1976-1980 Head Dia. 1.720 EXC. 1980 CABALLERO

V0399 $4.12 1981 Head Dia. 1.720 305-G 2BC

V0399+15 $8.81 1976-1980 Head Dia. 1.720 .015 OVERSIZE VALVE EXC 1980 CABALLERO

V0399+15 $8.81 1981 Head Dia. 1.720 .015 OVERSIZE VALVE 305-G 2BC

V0399+3 $6.37 1976-1980 Head Dia. 1.720 .003 OVERSIZE VALVE EXC 1980 CABALLERO

V0399+3 $6.37 1981 Head Dia. 1.720 .003 OVERSIZE VALVE 305-G 2BC

V1393 $8.25 1980 Head Dia. 1.840 CABALLERO

V1393 $8.25 1981-1995 Head Dia. 1.840 4BC

Exhaust Valve V0400 $7.41 1976-1980 Head Dia. 1.500 EXC. 1976-78 CK-15, 25 SUBURBAN, JIMMY

V1192 $8.32 1987-1995 Head Dia. 1.500 ALL

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) MAY BE USED IN USE IN PLACE OF STOCK VALVE

V1294 $14.20 1976-1978 Head Dia. 1.500 CK-15, 25, SUBURBAN, JIMMY

V1294 $14.20 1981-1986 Head Dia. 1.500 305-H ENG. C20 & K20 (2DR CAB.)

V1646 $45.22 1976-1978 Head Dia. 1.500 OPTIONAL SUPER ALLOY (NICKEL) CK-15, 25, SUBURBAN, JIMMY

V1807 $9.62 1996-2002 Head Dia. 1.500

Valve Springs VS2229 $2.39 1996-2002

VS580 $5.37 1976-1978 EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 1976-1978 STANDARD REPLACEMENT INT.

VS380 $3.24 1979-1995 STANDARD REPLACEMENT INT. & EXH.

VS739R $5.10 1976-1978 CHROME VANADIUM INT.

VS739R $5.10 1979-1985 CHROME VANADIUM INT. & EXH.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 1976-1988 NO RAIL

MR926 $6.03 1989-2000 W/RAIL

Rocker Arm Kit MRK401 $7.00 1976-1988 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

MRK651 $5.95 1989-2002 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 1976-2000

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Continued on Next Page

Page 417.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

50 5.0 (305) OHV ENG - 1976-02 - 8 Cyl. - 3.74 Bore INCLUDES VANS (Continued)

- Chain 163 $14.17 58 LINKS H.D.

499 $18.97 1976-1984 46 LINKS

506 $20.15 1985-2002 46 LINKS W/BACK BEND

509 $29.01 1993-1994 46 LINKS NO BACK BEND

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 1976-1995 36 TEETH

S732 $17.41 1996-2002 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-499S $31.69 1976-1984 INCLUDES [499], [S390] & [S391]

3-506SA $31.56 1985-1995 INCLUDES [506], [S390] & [S391]

3-506SC $33.28 1996-2002 INCLUDES [506], [S732] & [S391]

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

51 307 ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 55S $20.54 1968-1970

55S $20.54 1971-1972 EXC. G SERIES & SPRINT

55S1 $14.18 1971-1972 G SERIES & SPRINT

55S1 $14.18 1973

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

IS77A $10.96 1971 USES NYLON SHAFT GUIDE SPRINT ONLY

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Continued on Next Page

Page 418.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

51 307 ENG - 1968-73 - 8 Cyl. - 3 7/8 Bore (Continued)

- Camshaft CCS2 $88.96 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ
MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V0400 $7.41 1968-1970 Head Dia. 1.500

V1192 $8.32 1971-1973 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V0400] & [V1192]

Valve Springs VS580 $5.37 1973 EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 1968-1972 STANDARD REPLACEMENT INT. & EXH.

VS380 $3.24 1973 STANDARD REPLACEMENT INT.

VS739R $5.10 1968-1972 CHROME VANADIUM INT. & EXH.

VS739R $5.10 1973 CHROME VANADIUM INT.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-499S $31.69 INCLUDES [499], [S390] & [S391]

52 317 ENG - 1955-58 - 8 Cyl. - 3 15/16 Bore (GMC ONLY)

- Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS54A $11.11 -

Mell Lube M10012 $4.93 -

Lifters JB951 $5.88 HYD.

Push Rods MPR105 $2.53 1956-1958

Valve Springs VS120 $1.43 1956 OUTER

VS130 $4.31 1956 INNER

Valve Locks VL200 $1.21 -

Chain 347 $20.45 60 LINKS

Page 419.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

53 322 ENG - 1956-60 - 8 Cyl. - 4.000 Bore (CHEVY ONLY)

- Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Mell Lube M10012 $4.93 -

Lifters JB896 $25.34 HYD.

Cam Sprocket S346 $27.41 54 TEETH

Crank Sprocket S347 $16.07 27 TEETH

54 324 ENG - 1955-56 - 8 Cyl. - 3 7/8 Bore (GMC ONLY)

- Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Mell Lube M10012 $4.93 -

Push Rods MPR91 $6.57 BEFORE SER. #01763

Chain 494 $22.07 48 LINKS

Crank Sprocket S246 $39.56 18 TEETH

55 5.3 (323,325) OHV ENG - 1999-2010 - 8 Cyl. - 3.78 Bore (GEN III, GEN IV VORTEC) FLEX FUEL INCLUDES VANS

-

Oil Pump M295 $96.88 1999-2009 EXCLUDES (2007-09) YUKON XL, SUBURBAN W/LC9, LY5 ENG. (2007-09) AVALANCHE VIN 3 W/FLEX FUEL. (2005-09) TRAILBLAZER, ENVOY. (2009) SAVANA, EXPRESS 1500.

M355 $181.02 2005-2007 ENVOY, TRAILBLAZER ONLY 2007-2009 (2007-09) YUKON XL, SUBURBAN W/LC9, LY5 ENG.

M365 $150.81 (2007-09) AVALANCHE VIN 3 W/FLEX FUEL. (2008-09) TRAILBLAZER, ENVOY. (2009) SAVANA, EXPRESS 1500

Oil Filter Adapter MFA350 $25.34 1999-2009 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 324S $128.74 1999-2007 EXCLUDES ENVOY, SSR, TRAILBLAZER

Camshaft MC1383 $440.26 2000-2007 HYD. ROLLER (AVALANCHE, SIERRA, SILVERADO, SUBURBAN, TAHOE, YUKON. EXCLUDING 2005-07 VIN B)

MC1383 $440.26 2003-2004 HYD. ROLLER (ENVOY, SSR, TRAILBLAZER)

MC1383 $440.26 2003-2007 HYD. ROLLER (EXPRESS, SAVANA 1500, 2500)

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 1999-2004 HYD. ROLLER ALL

JB2079 $14.23 2005-2010 HYD. ROLLER W/NON ACTIVE FUEL MANAGEMENT

Intake Valve V1934 $9.25 1999-2007 Head Dia 1.890 INCLUDES FLEX FUEL, EXCLUDES LPG

Exhaust Valve V1935 $14.10 1999-2007 Head Dia. 1.550 INCLUDES FLEX FUEL. EXCLUDES LPG.

Valve Springs VS2254 $6.15 -

Valve Locks VL760 $1.22 -

Chain 3SR60 $18.92 1999-2004 60 LINKS

3SRH60 $18.91 2005-2010 60 LINKS

Cam Sprocket S826 $29.01 1999-2004 44 TEETH

S878 $33.22 2005-2006 44 TEETH RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN.

S878 $33.22 2007 44 TEETH EXPRESS 1500, SAVANA 1500 (RELUCTOR
STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN)

S894 $26.79 2007-2009 44 TEETH EXCLUDES 2007 EXPRESS 1500, SAVANA 1500 (NON-RELUCTOR STYLE CAM SPROCKET)

Crank Sprocket S827 $22.24 1999-2009 22 TEETH 2007-2009 INCLUDES [3SRH60], [S894] & [S827] EXCLUDING 2007 EXPRESS 1500 & SAVANA 1500

3pc Timing Set 3-3SRH60S $74.59

3pc Timing Set 3-3SRH60SA $66.57 2005-2006 INCLUDES [3SRH60], [S878] & [S827] (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE)

3-3SRH60SA $66.57 2007 INCLUDES [3SRH60], [S878] & [S827] EXPRESS 1500, SAVANA 1500

Page 420.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

56 327 ENG - 1962-68 - 8 Cyl. - 4.000 Bore (CHEVY 1962-68) (GMC 1967-68)

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 55S $20.54 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE 1ST DES. ALL

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE 1ST DES. ALL OEM 3998287

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 1963-1968 HYD.

CCS3 $227.20 1962 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 1963-1968 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

CLCCS3 $360.99 1962 KIT INCLUDES 1-[CCS-3] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V1192 $8.32 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V1192]

Valve Springs VS170 $4.45 962-1966

Valve Spring with Hydraulic Lifters VS380 $3.24 1967-1968 STANDARD REPLACEMENT

VS739R $5.10 1967-1968 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 1967-1968 46 LINKS

505 $36.51 1962-1966 46 LINKS

Cam Sprocket S261 $18.95 1962-1966 36 TEETH

S288 $25.20 44 TEETH H.D.

S390 $10.41 1967-1968 36 TEETH

Crank Sprocket S262 $22.02 1962-1966 18 TEETH

S289 $11.30 22 TEETH H.D.

S391 $5.37 1967-1968 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D.

3-489S $52.26 1962-1966 INCLUDES [505], [S261] & [S262]

3-499S $31.69 1967-1968 INCLUDES [499], [S390] & [S391]

Page 421.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

57 336 ENG - 1958-59 - 8 Cyl. - 3 7/8 Bore (GMC ONLY)

- Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS54A $11.11 -

Mell Lube M10012 $4.93 -

Lifters JB951 $5.88 HYD.

Push Rods MPR105 $2.53 -

Valve Springs VS120 $1.43 OUTER

VS130 $4.31 INNER

Valve Locks VL200 $1.21 -

58 347. ENG - 1957-58 - 8 Cyl. - 3 15/16 Bore (GMC ONLY)

- Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS54A $11.11 -

Mell Lube M10012 $4.93 -

Lifters JB951 $5.88 HYD.

Push Rods MPR105 $2.53 -

Valve Springs VS120 $1.43 OUTER

VS130 $4.31 INNER

Valve Locks VL200 $1.21 -

Chain 347 $20.45 60 LINKS

59 348. ENG - 1958-65 - 8 Cyl. - 4 1/8 Bore (CHEVY ONLY)

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 55S $20.54 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS4 $254.32 HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR105 $2.53 EXH.

MPR35AB $3.63 INT.

Chain 162 $10.73 64 LINKS

Page 422.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

60 5.7 (350) ENG - 1969-76 - 8 Cyl. - 4.000 Bore VIN CODES A,E,B,J,V,Y CARBURETED ENGINES

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 55S $20.54 1969-1970 EXC. 50 & 60 SERIES

55S $20.54 1971-1972 KE & PE MODELS

55S1 $14.18 1971-1972 CE & G MODELS

55S1 $14.18 1973-1976 EXC. 50 & 60 SERIES

55S2 $15.77 1973-1979 50 & 60 SERIES

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE EXC. 1969-72 50 SERIES

IS55F $14.14 1969-1972 SERIES 50

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE EXC. 1969-72 50 SERIES

IS77A $10.96 1971 USES NYLON SHAFT GUIDE SPRINT

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 HYD. EXC. 1969-72 & 1974 CALIF. & SUBURBAN

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD. EXC. 1969-72 & 1974 CALIF. & SUBURBAN

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL GAS ENG.

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE. GAS ENG.

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE. GAS ENG.

V0696 $5.77 Head Dia. 1.940 GAS ENG.

V0696+15 $4.21 Head Dia. 1.940 .015 OVERSIZE STEEL VALVE W/GAS ENG.

V0696+3 $4.09 Head Dia. 1.940 .003 OVERSIZE STEEL VALVE W/GAS ENG.

V1195 $6.81 Head Dia. 1.940 OPTIONAL (W/CHROME PLATE)

Exhaust Valve V1192 $8.32 Head Dia. 1.500 GAS W/STEM SIZE OF .341

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) FOR GAS & LPG W/STEM SIZE OF .341

V1294 $14.20 Head Dia. 1.500 GAS W/STEM SIZE OF .371

V1646 $45.22 Head Dia. 1.500 OPTIONAL SUPER ALLOY (NICKEL) SAME APPLICATION AS [V1294]

Valve Springs VS580 $5.37 1973-1976 EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 1969-1972 STANDARD REPLACEMENT INT. & EXH.

VS380 $3.24 1973-1976 STANDARD REPLACEMENT INT.

VS739R $5.10 1969-1972 CHROME VANADIUM INT. & EXH.

VS739R $5.10 1973-1976 CHROME VANADIUM INT.

Valve Locks VL200 $1.21 -

Continued on Next Page

Page 423.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

60 5.7 (350) ENG - 1969-76 - 8 Cyl. - 4.000 Bore VIN CODES A,E,B,J,V,Y CARBURETED ENGINES (Continued)

-

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D

S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D. WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

3-499S $31.69 INCLUDES [499], [S390] & [S391]

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE833 $5.77 1969-1972 CARDED, STEEL KIT INCLUDES (1) MPC-69 $1.07 BLOCK, (1) MPS-58 $0.62 VIN E ONLY

MPE833R $1.46 1969-1972 BAGGED, STEEL KIT INCLUDES (1) MPC-69 $1.07 BLOCK, (1) MPS-58 $0.62 VIN E ONLY

Page 424.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

61 5.7-N (350) ENG - 1983-84 - 8 Cyl. - 4.000 Bore FUEL INJECTED ENGINES

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 .003 OVERSIZE VALVE

Exhaust Valve V1294 $14.20 Head Dia. 1.500 STELLITE

Valve Springs VS580 $5.37 EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT INT.

VS739R $5.10 CHROME VANADIUM INT.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 NO RAIL

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D.

499 $18.97 46 LINKS

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 36 TEETH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D. WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

3-499S $31.69 INCLUDES [499], [S390] & [S391]

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

Page 425.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

62 5.7-Z (350) ENG - 1978-81 - 8 Cyl. - 4.06 Bore (CHEVY 1978-81) (GMC 1978-81) (DIESEL)

-

Oil Pump M22FHV $181.07 HI VOL PUMP (20% ADDL VOL OF OIL) NOTE: THIS HI VOL PUMP IS MANUFACTURED W/BOLT ON TYPE FLANGE AND A CHAMFERED HOLE. EITHER A BOLT ON OR PRESS IN SCREEN CAN BE USED.

M22G $123.94 -

Pump Kit K22G $35.16 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS.
FOR LARGE DIAMETER VERTICAL FILTER ONLY. Screen Assy

Screen Assy 22FHVS $44.92 BOLT ON SCREEN W/3/4" PICK UP TUBE- USE W/HI VOL PUMP

2FS PRESS IN SCREEN W/5/8" PICK UP

Intermediate Shaft IS22F $14.18 -

Camshaft SOC12 $163.53 1978-1980 HYD.

Mell Lube M10012 $4.93 -

Lifters JB2065 $18.58 1978-1980 STANDARD HYD.

JB2066 $13.45 1978-1980 .010 OVERSIZE HYD.

JB2104 $15.84 1981 HYD. ROLLER

Push Rods MPR307 $2.62 1978-1979

MPR343 $2.09 1980 EXC. GOODWRENCH ENG.

MPR358 $4.25 1980 GOODWRENCH ENG.

MPR358 $4.25 1981

Intake Valve V1370 $7.20 Head Dia. 1.875

Valve Springs VS1100 $6.12 1981-1984

VS700 $6.16 1978-1980

Valve Locks VL200 $1.21 -

Rocker Arms MR890 $10.27 1978-1979

MR891 $3.58 1980-1981

Rocker Arm Kit MRK540-1 $25.28 1978-1979 KIT INCLUDES 2-[MR-890] & 1-[MRM-1798] PIVOT

MRK550-2 $14.12 1980-1981 KIT INCLUDES 2-[MR-891] & 1-[MRM-1798]

Rocker Arm Pivot MRM1798 $2.85 -

Chain 180 $11.35 48 LINKS

3pc Timing Set 3-180S $84.78 INCLUDES [180], [S498] & [S503]

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

Page 426.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

63 5.7-K (350) ENG - 1987-96 - 8 Cyl. - 4.000 Bore (LO5 ENG.)

- Oil Pump M55 $41.17 1987-1992 5/8" SCREEN INLET STANDARD VOLUME W/5/8" DIA. INLET HOLE

M55 $41.17 1993-1994 5/8" SCREEN INLET STANDARD VOLUME W/5/8" DIA. INLET HOLE

M55HV $55.59 1987-1992 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET W/5/8" DIA. INLET HOLE

M55HV $55.59 1993-1994 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET W/5/8" DIA. INLET HOLE

M155 $58.59 1993-1994 3/4" SCREEN INLET STANDARD VOLUME W/3/4" DIA. INLET HOLE

M155 $58.59 1995-1996 3/4" SCREEN INLET STANDARD VOLUME W/3/4" DIA. INLET HOLE

M155HV $76.26 1993-1994 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET W/3/4" INLET HOLE

M155HV $76.26 1995-1996 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET W/3/4" DIA. INLET HOLE

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

- Screen Assy 155S $20.53 1993-1994 W/3/4" DIA. PICK-UP TUBE EXC. C1, 2 & G3 W/5 QT.
OIL PAN

155S $20.53 1995 W/3/4" DIA. PICK-UP TUBE EXC. G3 W/5 QT. OIL PAN & C.N.G. CONVERSION

155S $20.53 1996

213S $23.69 1993 G3 & C1, 2 W/5 QT. OIL PAN W/3/4" DIA. PICK-UP TUBE

213S $23.69 1995 G3 W/5 QT. OIL PAN & C.N.G. CONVERSION. 3/4" OPENING.

55S1 $14.18 1987-1992 EXC. 1989-92 C2, 3 & G3 W/5 QT. OIL PAN

55S1 $14.18 1993-1994 W/5/8" DIA. PICK-UP TUBE EXC. C1, 2 & G3 W/5 QT. OIL PAN

55S2 $15.77 1989-1992 C2, 3 & G3 W/5 QT. OIL PAN

55S2 $15.77 1993 C1, 2 W/5 QT. OIL PAN W/5/8" DIA. PICK-UP TUBE

55S2 $15.77 1993-1994 G3 W/5 QT. OIL PAN

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V1195 $6.81 Head Dia. 1.940

Exhaust Valve V1192 $8.32 Head Dia. 1.500

V1206 $20.45 Head Dia. 1.500 OPTIONAL (STELLITE) SAME APPLICATION AS [V1192]

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 1987-1988 NO RAIL

MR926 $6.03 1989-1996 W/RAIL

Rocker Arm Kit MRK401 $7.00 1987-1988 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

MRK651 $5.95 1989-1996 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM-1786]

Continued on Next Page

Page 427.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

63 5.7-K (350) ENG - 1987-96 - 8 Cyl. - 4.000 Bore (LO5 ENG.) (Continued)

- Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D. ROLLER

202 $22.04 46 LINKS .275/.285 TOOTH WIDTH- ROLLER

499 $18.97 46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND. STANDARD SILENT CHAIN

506 $20.15 46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND. HEAVY DUTY SILENT CHAIN

509 $29.01 1993-1994 46 LINKS .40/.41 TOOTH WIDTH NO BACK BEND

Cam Sprocket S288 $25.20 44 TEETH H.D

S390 $10.41 36 TEETH .40/.41 TOOTH WIDTH

S634 $19.02 36 TEETH .275/.285 TOOTH WIDTH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S505 $25.36 18 TEETH .40/.41 TOOTH WIDTH

S645 $41.20 18 TEETH .275/.285 TOOTH WIDTH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D. WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

3-202S $61.95 INCLUDES [202], [S634] & [S645] (.275/.285) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

3-506S $87.31 1987-1995 INCLUDES (506), (S390), (S505) (.40/.41) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

Page 428.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

64 5.7-L,M & P (350) ENG - 1974-88 - 8 Cyl. - 4.000 Bore (5.7-L 1974-86) (5.7-M 1979-88) (5.7-P 1980)

-

Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 55S1 $14.18 VIN L, M

55S2 $15.77 VIN P

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 1974-1986 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES. VIN CODE L

MTC1 $103.21 1980-1987 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES. VIN CODES M, P

Torque Cam Lifter Kit CLMTC1 $231.95 1974-1986 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1- [MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES. VIN CODE L

CLMTC1 $231.95 1980-1987 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1- [MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES. VIN CODES M, P

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 Head Dia. 1.720 STEEL

V0399+15 $8.81 Head Dia. 1.720 STEEL .015 OVERSIZE VALVE

V0399+3 $6.37 Head Dia. 1.720 STEEL .003 OVERSIZE VALVE

V1195 $6.81 Head Dia. 1.940 CHROME

Exhaust Valve V1192 $8.32 Head Dia. 1.500 STANDARD

V1206 $20.45 Head Dia. 1.500 STELLITE FACE W/ 0.342 STEM

V1294 $14.20 1980-1984 Head Dia. 1.500 VIN L, P STELLITE FACE W/.3718 STEM

V1646 $45.22 1985-1988 Head Dia. 1.500 VIN M STELLITE

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT

VS739R $5.10 CHROME VANADIUM

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS H.D. ROLLER

202 $22.04 1985-1988 46 LINKS VIN M, P .275/.285 TOOTH WIDTH ROLLER

499 $18.97 1974-1986 46 LINKS VIN L .40/.41 TOOTH WIDTH W/ BACK BEND. STANDARD SILENT CHAIN

499 $18.97 1980-1984 46 LINKS VIN M, P .40/.41 TOOTH WIDTH W/ BACK BEND. STANDARD SILENT CHAIN

Continued on Next Page

Page 429.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

64 5.7-L,M & P (350) ENG - 1974-88 - 8 Cyl. - 4.000 Bore (5.7-L 1974-86) (5.7-M 1979-88) (5.7-P 1980) (Continued)

-

Chain 506 $20.15 1985-1988 46 LINKS VIN M, P .40/.41 TOOTH WIDTH W/BACK BEND. HEAVY DUTY SILENT CHAIN

Cam Sprocket S288 $25.20 44 TEETH H.D.

S390 $10.41 1980-1988 36 TEETH VIN M, P .40/.41 TOOTH WIDTH

S634 $19.02 1985-1988 36 TEETH VIN M, P .275/.285 TOOTH WIDTH

Crank Sprocket S289 $11.30 22 TEETH H.D.

S391 $5.37 18 TEETH VIN L

S391 $5.37 18 TEETH VIN L

S391 $5.37 1980-1984 18 TEETH VIN M, P .40/.41 TOOTH WIDTH

S505 $25.36 1985-1988 18 TEETH VIN M, P .40/.41 TOOTH WIDTH

S645 $41.20 1985-1988 18 TEETH VIN M, P .275/.285 TOOTH WIDTH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289] H.D. WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

3-202S $61.95 1985-1988 INCLUDES [202], [S634] & [S645] VIN M, P (.275/.285) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS SET

3-499S $31.69 INCLUDES [499], [S390] & [S391] VIN L

3-499S $31.69 1980-1984 INCLUDES [499], [S390] & [S391] VIN M,P

3-506S $87.31 1985-1988 INCLUDES (506), (S390), (S505) VIN M, P (.40/.41) WILL WORK FOR ALL TOOTH WIDTHS IF REPLACED AS A SET

Expansion Plug Kits MPE100 $9.84 CARDED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100B $22.73 CARDED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100BR $23.71 BAGGED, BRASS KIT INCLUDES (8) MPC-41-B BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE100R $8.22 BAGGED, STEEL KIT INCLUDES (8) MPC-41 $0.75 BLOCK, (2) MPC- 48 OIL GALLEY, (3) MPC-95 $0.33 OIL GALLEY, (3) MPC-108 $0.29 OIL GALLEY, (1) MPS-78 $0.80 CAMSHAFT, (5) MPP-567 $0.45

MPE262 $6.86 CARDED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

MPE262R $14.23 BAGGED, STEEL KIT INCLUDES (8) MPC-41-A BLOCK, (1) MPS- 78 CAMSHAFT, (3) MPC-95 $0.33 BLOCK, (3) MPC-108 $0.29 BLOCK, (5) MPP-567 $0.45 OVERSIZE BLOCK PLUG

65 5.7-R (350) OHV ENG - 1996-02 - 8 Cyl. - 4.000 Bore (VORTEC) INCLUDES VANS

- Oil Pump M155 $58.59 3/4" SCREEN INLET STANDARD VOLUME

M155HV $76.26 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 3/4" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Oil Filter Adapter MFA350 $25.34 ADAPTER NOT FOR USE WITH 90° FILTER APPLICATIONS. FOR LARGE DIAMETER VERTICAL FILTER ONLY.

Screen Assy 155S $20.53 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft MC1320 $489.56 HYD ROLLER Camshaft Lifter Kits Using Hydraulic Lifters

Camshaft Lifter Kits Using Hydraulic Lifters CLMC1320 $723.23 KIT INCLUDES 1-[MC1320] CAM, 16-[JB-2079] LIFTERS & 4 OZ MELL LUBE

Continued on Next Page

Page 430.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

65 5.7-R (350) OHV ENG - 1996-02 - 8 Cyl. - 4.000 Bore (VORTEC) INCLUDES VANS (Continued)

- Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 HYD. ROLLER

Push Rods MPR615 $3.88 -

Intake Valve V1931 $8.32 Head Dia. 1.940

Exhaust Valve V1807 $9.62 Head Dia. 1.500

Valve Springs VS2229 $2.39 -

Valve Locks VL200 $1.21 -

Rocker Arms MR926 $6.03 -

Rocker Arm Kit MRK651 $5.95 KIT INCLUDES 1-[MR-926], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 202 $22.04 46 LINKS .275/.285 TOOTH WIDTH- ROLLER

499 $18.97 46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND. STANDARD SILENT CHAIN

506 $20.15 46 LINKS .40/.41 TOOTH WIDTH W/BACK BEND. HEAVY DUTY SILENT CHAIN

Cam Sprocket S732 $17.41 36 TEETH .40/.41 TOOTH WIDTH

S784 $50.64 36 TEETH .275/.285 TOOTH WIDTH

Crank Sprocket S645 $41.20 18 TEETH .275/.285 TOOTH WIDTH

S797 $37.97 18 TEETH .40/.41 TOOTH WIDTH

3pc Timing Set 3-202SA $76.10 INCLUDES [202], [S784], [S645] .275/.285 TOOTH WIDTH

3-506SE $53.87 INCLUDES [506], [S732], [S797] .40/.41 TOOTH WIDTH W/BACK BEND. HEAVY DUTY SILENT CHAIN

Expansion Plug Kits MPE820 $5.85 CARDED, STEEL KIT INCLUDES (2) MPC-18 $0.60 BLOCK, (1) MPC-11

MPE820R $1.91 BAGGED, STEEL KIT INCLUDES (2) MPC-18 $0.60 BLOCK, (1) MPC-11

66 351. C,E,M ENG - 1960-72 - V6 - 4 9/16 Bore (GMC ONLY)

- Oil Pump M70 $154.12 M70C $84.16 5/16" MOUNTING HOLES 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0707 $67.43 1960-1965 Head Dia. 1.825 351.

V0707 $67.43 1966-1972 Head Dia. 1.825 351C

Valve Locks VL200 $1.21 -

Chain 166 $12.10 1960-1965 86 LINKS ROLLER CHAIN

Cam Sprocket S376 $31.17 1966 48 TEETH

3pc Timing Set 3-170S $86.14 1966 INCLUDES [170], [S376] & [S377]

3-170SA $83.50 1967-1972 INCLUDES [170], [S400] & [S377]

Expansion Plug Kits MPE121 $8.33 CARDED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121B $18.35 CARDED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121BR $15.84 BAGGED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121R $9.03 BAGGED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

Page 431.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

67 D351 DIESEL ENG - 1965-67 - V6 - 4 9/16 Bore (GMC ONLY)

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70E $14.44 -

Mell Lube M10012 $4.93 -

68 6.0 (364) OHV ENG - 1999-2010 - 8 Cyl. - 4.00 Bore (GEN III, GEN IV VORTEC) INCLUDES VANS

- Oil Pump M295 $96.88 M295 $96.88 EXCLUDES (2007-09) AVALANCHE. (2008-09) TAHOE, YUKON, SIERRA, SILVERADO W/LFA HYBRID ENG. (2007) VIN CODE Y SUBURBAN 1500-2500, YUKON XL 1500-2500.

M365 $150.81 2007 SUBURBAN 1500-2500, YUKON XL 1500-2500 VIN Y (1/2 TON)

M365 $150.81 007-2009 AVALANCHE

Screen Assy 324S $128.74 324S $128.74 1999-2006 EXCLUDES TRAILBLAZER AND SSR 324S $128.74 2003-2007 EXPRESS, SAVANA

Camshaft MC1383 $440.26 1999-2000 HYD. ROLLER SIERRA, SILVERADO 2500 $58.59

MC1383 $440.26 2000 HYD. ROLLER YUKON XL 2500 $58.59

Mell Lube M10012 $4.93 -

Lifters JB2079 $14.23 1999-2009 HYD. ROLLER

Exhaust Valve V1935 $14.10 2001-2006 Head Dia. 1.550 UNLEADED FUEL ONLY. EXCLUDES LPG

Valve Springs VS2254 $6.15 EXCLUDES TRAILBLAZER, SSR

Valve Locks VL760 $1.22 -

Chain 3SR60 $18.92 1999-2004 60 LINKS

3SRH60 $18.91 2005-2010 60 LINKS

Cam Sprocket S826 $29.01 1999-2004 44 TEETH EXC 2004 VIN CODE N

S878 $33.22 2005-2006 44 TEETH RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN.

S878 $33.22 2007 44 TEETH EXPRESS, SAVANA ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE. MUST BE USED WITH 3SRH60 $18.91 CHAIN)

S894 $26.79 2007-2009 44 TEETH SIERRA, SILVERADO & TRAILBLAZER ONLY (NON ACTUATOR APPLICATIONS)

Crank Sprocket S827 $22.24 22 TEETH

3pc Timing Set 3-3SRH60S $74.59 2007-2009 INCLUDES [3SRH60], [S894] & [S827] SIERRA, SILVERADO & TRAILBLAZER ONLY (NON ACTUATOR APPLICATIONS)

3-3SRH60SA $66.57 2005-2006 INCLUDES [3SRH60], [S878] & [S827] RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE

3-3SRH60SA $66.57 2007 INCLUDES [3SRH60], [S878] & [S827] EXPRESS, SAVANA ONLY (RELUCTOR STYLE CAM SPROCKET, HALF MOON HUB ON FACE)

Page 432.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

69 6.0 (366) ENG - 1966-98 - 8 Cyl. - 3 15/16 Bore (MEDIUM DUTY)

- Oil Pump M77G $61.95 1966-1990 STANDARD VOLUME

M77HV $82.51 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP MUST USE IS SHAFT W/STEEL

M307 $99.95 1991-1998 STANDARD VOLUME

M307-353S $139.82 1991-1998 INCLUDES SCREEN STANDARD VOLUME FOR 9 1/8" TO 9 1/2" PAN DEPTH

Pump Kit K77G $47.59 1966-1990 EXC. HI VOL

Screen Assy 241S $17.36 FOR 9" PAN DEPTH

Screen Assy 305S $20.57 1977-1978 FOR 8" PAN DEPTH

305S $20.57 1983-1985 FOR 8" PAN DEPTH

307S $33.28 1991-1998 FOR 9 1/2" TO 9 7/8 PAN DEPTH. USE WITH M307 $99.95

353S $47.54 1991-1998 FOR 9 1/8" TO 9 1/2 PAN DEPTH.

Intermediate Shaft IS77 $14.18 1973-1998 HAS STEEL SHAFT GUIDE CAN USE IN PLACE OF [IS-77A]

IS77A $10.96 1973-1998 USES NYLON SHAFT GUIDE

IS77B $14.12 1968-1972 HAS STEEL SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 1973-1998 USE W/[IS-77A]

Camshaft CCS20 $123.83 1969-1972 HYD.

CCS21 $175.32 1966-1968 GEAR DRIVE HYD.

CCS25 $124.02 1985-1986 HYD.

CCS25 $124.02 1987-1990 W/FED EMISSION OVERRIDE NC7 HYD.

CCS31 $133.35 1973-1984 HYD.

CCS31 $133.35 1987-1990 W/FED EMISSION NA5. ALSO W/X78 EXPORT ENG. HYD.

CCS31 $133.35 1991-1998 HYD.

Camshaft Lifter Kit CLCCS20 $238.37 1969-1972 KIT INCLUDES 1-[CCS-20] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

CLCCS21 $177.33 1966-1968 KIT INCLUDES 1-[CCS-21] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE GEAR DRIVEN

CLCCS25 $244.73 1985-1990 KIT INCLUDES 1-[CCS-25] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE W/FED. EMISSION OVERRIDE

CLCCS31 $264.94 1973-1984 KIT INCLUDES 1-[CCS-31] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 JB969 $6.81 1991-1998 HYD.

Push Rods MPR103B $2.50 1977-1990 INT.

MPR335A $4.15 1977-1990 EXH.

MPR45 $7.49 1966-1976 INT.

MPR45A $18.95 1966-1976 EXH.

MPR463 $3.48 1991-1996 INT.

MPR464 $3.63 1991-1996 EXH.

Intake Valve V0997 $10.35 1966-1984 Head Dia. 1.840

V0997 $10.35 1985-1988 Head Dia. 1.840 W/O EMISSIONS

Exhaust Valve V0996 $20.57 1966-1984 Head Dia. 1.660 (STELLITE)

V0996 $20.57 1985 Head Dia. 1.660 W/O EMISSIONS (STELLITE)

V0996 $20.57 1991-1998 Head Dia. 1.660

V1235 $45.74 1985-1990 Head Dia. 1.660 W/EMISSIONS- SUPER ALLOY (NICKEL)

Valve Springs VS1040 $6.57 1966-1985

VS1330 $7.08 1986-1993

VS1330 $7.08 1994 1ST DES. W/DAMPER

Valve Locks VL300 $1.37 -

Rocker Arms MR867 $8.92 1966-1990

MR928 $11.86 1991-1998

Rocker Arm Kit MRK405 $11.65 1966-1990 KIT INCLUDES 1-[MR-867], 1-[MRM-1797] & 1-[MRM- 1793]

MRK653 $18.89 1991-1998 KIT INCLUDES 1-[MR-928], 1 BALL & 1 BOLT

Rocker Arm Ball MRM1797 $0.97 1966-1990

Rocker Arm Nut MRM1793 $0.92 1966-1990

Chain 168 $22.18 1969-1990 66 LINKS

4SR50 $26.87 1991-1998 50 LINKS

Cam Sprocket S394 $19.02 1969-1990 50 TEETH

S710 $34.81 1991-1998 38 TEETH

Crank Sprocket S395 $11.69 1969-1990 25 TEETH

S717 $38.05 1991-1998 19 TEETH

3pc Timing Set 3-171S $68.13 1969-1990 INCLUDES [168], [S394] & [S395]

3-4SR50 $84.21 1991-1998 INCLUDES [4SR50], [S710] & [S717]

Continued on Next Page

Page 433.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

69 6.0 (366) ENG - 1966-98 - 8 Cyl. - 3 15/16 Bore (MEDIUM DUTY) (Continued)

- Expansion Plug Kits MPE102 $10.84 1966-1990 CARDED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102B $32.83 1966-1990 CARDED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102BR $28.56 1966-1990 BAGGED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102R $9.00 1966-1990 BAGGED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE275 $9.40 1991-1998 CARDED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275B $19.04 1991-1998 CARDED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275BR $20.45 1991-1998 BAGGED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275R $10.45 1991-1998 BAGGED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

70 370. ENG - 1957-59 - 8 Cyl. - 4.000 Bore (GMC ONLY)

- Mell Lube M10012 $4.93 -

Push Rods MPR91 $6.57 1957-1958

MPR93B $4.33 1959

Chain 162 $10.73 64 LINKS

71 379 ENG - 1973-74 - V6 - 4 9/16 Bore

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V1254 $86.79 Head Dia. 1.913

Valve Locks VL200 $1.21 -

3pc Timing Set 3-170SA $83.50 INCLUDES [170], [S400] & [S377]

72 6.2 (379) DIESEL ENG - 1982-93 - 8 Cyl. - 3.976 Bore (6.2-C 1982-93) (6.2-J 1982-93)

- Oil Pump M55I $88.80 -

Pump Kit K55H $61.85 -

Screen Assy 246S $31.61 -

Intermediate Shaft IS55H $14.17 -

Nylon Shaft Guide M55024 $0.67 -

Camshaft CCS36 $418.03 HYD. ROLLER

Mell Lube M10012 $4.93 -

Lifters JB2104 $15.84 HYD. ROLLER

Push Rods MPR609 $4.82 -

Intake Valve V1484 $10.13 1982-1983 Head Dia. 1.811 6.2-C

V1484 $10.13 984-1993 Head Dia. 1.811

V1518 $18.06 1982-1983 Head Dia. 1.968 6.2-J

Exhaust Valve V1482 $19.17 1984-1993 Head Dia. 1.495 6.2-J SERIES 10-30

V1483 $31.59 1982-1983 Head Dia. 1.653

Exhaust Valve V1483 $31.59 1984 Head Dia. 1.653 VIN CODE C

V1483 $31.59 1985-1987 Head Dia. 1.653 6.2-C W/FED. EMISSION & ALT. REQUIREMENTS

V1780 $18.94 1988-1993 Head Dia. 1.535 VIN CODE C

Continued on Next Page

Page 434.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

72 6.2 (379) DIESEL ENG - 1982-93 - 8 Cyl. - 3.976 Bore (6.2-C 1982-93) (6.2-J 1982-93) (Continued)

- Valve Springs VS1140 $5.31 -

Valve Locks VL200 $1.21 -

Rocker Arms MR900 $17.39 1985-1993

Chain 181 $39.62 48 LINKS

Cam Sprocket S524 $36.41 36 TEETH

Crank Sprocket S375 $22.24 18 TEETH

3pc Timing Set 3-181S $104.89 INCLUDES [181], [S524] & [S375]

Expansion Plug Kits MPE180 $8.25 CARDED, STEEL KIT INCLUDES (6) MPC-41 $0.75 BLOCK, (2) MPC- 282 OIL GALLEY, (1) MPS-154 $0.99 CAMSHAFT, (5) MPP-567, (1) MPS-637

MPE180B $18.04 CARDED, BRASS KIT INCLUDES (6) MPC-41-B BLOCK, (2) MPC- 282 OIL GALLEY, (1) CAMSHAFT, (5) MPP-567, (1) MPP-637 $0.59

MPE180BR $19.00 BAGGED, BRASS KIT INCLUDES (6) MPC-41-B BLOCK, (2) MPC- 282 OIL GALLEY, (1) CAMSHAFT, (5) MPP-567, (1) MPP-637 $0.59

MPE180R $9.08 BAGGED, STEEL KIT INCLUDES (6) MPC-41 $0.75 BLOCK, (2) MPC- 282 OIL GALLEY, (1) MPS-154 $0.99 CAMSHAFT, (5) MPP-567, (1) MPS-637

73 6.2-8 (378) OHV ENG - 2007-08 - V8 - 4.06 Bore (GEN IV VORTEC) (YUKON, SIERRA DENALI, YUKON XL1500 DENALI) GAS ENG

-

Oil Pump M365 $150.81 2007-2008

Mell Lube M10012 $4.93 -

Chain 3SRH60 $18.91 2007-2008 60 LINKS

Cam Sprocket S894 $26.79 2007-2008 44 TEETH EXCLUDES YUKON XL 1500 (CAM SPROCKET IS PART OF ACTUATOR)

Crank Sprocket S827 $22.24 2007-2008 22 TEETH

3pc Timing Set 3-3SRH60S $74.59 2007-2008 INCLUDES [3SRH60], [S894] & [S827] EXCLUDES YUKON XL 1500 (CAM SPROCKET IS PART OF ACTUATOR)

74 6.5 (395) DIESEL ENG - 1992-02 - 8 Cyl. - 4.06 Bore (6.5-F 1992-02 W/H.O. W/TURBO) (6.5-P 1994-95 W/O H.O. W/O TURBO) (6.5-S 1994-98 W/O H.O. W/TURBO) (6.5-Y 1994-99 W/H.O. W/O TURBO)

-

Oil Pump M55I $88.80 1992-1996

M255-294S $176.43 1997-2002 INCLUDES SCREEN

Pump Kit K55H $61.85 1992-1996

Screen Assy 246S $31.61 1992-1996

Intermediate Shaft IS55H $14.17 1992-2000

Nylon Shaft Guide M55024 $0.67 1992-2000

Camshaft CCS36 $418.03 HYD. ROLLER

Mell Lube M10012 $4.93 -

Lifters JB2104 $15.84 HYD. ROLLER

Push Rods MPR609 $4.82 -

Intake Valve V1484 $10.13 Head Dia. 1.811

Exhaust Valve V1780 $18.94 Head Dia. 1.535

Valve Springs VS1140 $5.31 -

Valve Locks VL200 $1.21 -

Rocker Arms MR900 $17.39 -

Chain 181 $39.62 48 LINKS

Cam Sprocket S524 $36.41 36 TEETH

Crank Sprocket S375 $22.24 1992-1993 18 TEETH

Crank Sprocket S807 $66.65 1994-2002 18 TEETH

3pc Timing Set 3-181S $104.89 1992-1993 INCLUDES [181], [S524] & [S375]

3-181SA $138.22 1994-2002 INCLUDES [181], [S807], [S524]

Expansion Plug Kits MPE180 $8.25 1992-1995 CARDED, STEEL KIT INCLUDES (6) MPC-41 $0.75 BLOCK, (2) MPC- 282 OIL GALLEY, (1) MPS-154 $0.99 CAMSHAFT, (5) MPP-567, (1) MPS-637

MPE180B $18.04 1992-1995 CARDED, BRASS KIT INCLUDES (6) MPC-41-B BLOCK, (2) MPC- 282 OIL GALLEY, (1) CAMSHAFT, (5) MPP-567, (1) MPP-637 $0.59

MPE180BR $19.00 1992-1995 BAGGED, BRASS KIT INCLUDES (6) MPC-41-B BLOCK, (2) MPC- 282 OIL GALLEY, (1) CAMSHAFT, (5) MPP-567, (1) MPP-637 $0.59

MPE180R $9.08 1992-1995 BAGGED, STEEL KIT INCLUDES (6) MPC-41 $0.75 BLOCK, (2) MPC- 282 OIL GALLEY, (1) MPS-154 $0.99 CAMSHAFT, (5) MPP-567, (1) MPS-637

Page 435.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

75 396. (400) ENG - 1968-70 - 8 Cyl. - 4 1/8 Bore

- Oil Pump M77G $61.95 -

M77HV $82.51 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP MUST USE IS SHAFT W/STEEL GUIDE

Pump Kit K77G $47.59 EXC. HI VOL

Screen Assy 305S $20.57 FOR USE WITH 8" PANS

Intermediate Shaft IS77 $14.18 HAS STEEL SHAFT GUIDE

IS77A $10.96 USES NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-77A]

Camshaft CCS20 $123.83 HYD.

Camshaft Lifter Kit CLCCS20 $238.37 KIT INCLUDES 1-[CCS-20] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC6 $146.11 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Torque Cam Lifter Kit CLMTC6 $278.09 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-6] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR379 $2.40 INT. 5/16" DIA.

MPR380 $2.27 EXH. 5/16" DIA.

MPR44 $3.80 INT. 3/8" DIA.

MPR44A $3.80 EXH. 3/8" DIA.

Intake Valve V1107 $7.31 Head Dia. 2.065

V1107+3 Head Dia. 2.065 .003 OVERSIZE VALVE

Exhaust Valve V1106 $12.43 Head Dia. 1.720

V1106+15 $9.85 Head Dia. 1.172 .015 OVERSIZE VALVE HIGH ALLOY STEEL

V1261 $17.28 Head Dia. 1.720 OPTIONAL (STELLITE) SAME APPLICATION AS [V1106]

Valve Springs VS330 $5.37 SINGLE SPRING

VS940 $9.81 DUAL SPRINGS

Valve Locks VL300 $1.37 -

Rocker Arms MR867 $8.92 -

Rocker Arm Kit MRK405 $11.65 KIT INCLUDES 1-[MR-867], 1-[MRM-1797] & 1-[MRM-1793]

Rocker Arm Ball MRM1797 $0.97 -

Rocker Arm Nut MRM1793 $0.92 -

Chain 168 $22.18 66 LINKS H.D.

501 $20.59 50 LINKS

Cam Sprocket S392 $9.83 38 TEETH

S394 $19.02 50 TEETH H.D.

Crank Sprocket S393 $5.23 19 TEETH

S395 $11.69 25 TEETH H.D.

3pc Timing Set 3-171S $68.13 INCLUDES [168], [S394] & [S395] H.D.

3-501S $50.69 INCLUDES [501], [S392] & [S393]

Page 436.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

76 400 ENG - 1974-80 - 8 Cyl. - 4 1/8 Bore

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 55S1 $14.18 -

Intermediate Shaft IS55E $15.73 MANUFACTURED WITH STEEL SHAFT GUIDE- ELIMINATES NYLON SHAFT GUIDE

IS55G $12.56 USES M-55005 $1.22 NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-55G]

Camshaft CCS2 $88.96 HYD.

Camshaft Lifter Kit CLCCS2 $232.03 KIT INCLUDES 1-[CCS-2] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE HYD.

Torque Camshaft MTC1 $103.21 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-MID. PERF. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Torque Cam Lifter Kit CLMTC1 $231.95 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-1] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CHECK FOR COIL BIND. USE [VS-380] SPRING W/INSTALLED HGT. OF 1.72 CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW- MID. PERF. CAM LIFT .280 INT. .295 EXH. USE ONLY WITH CARBURETTED ENGINES.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR34B $1.83 -

Intake Valve V0399 $4.12 1975-1978 Head Dia. 1.720 EXC. CALIF. & SPRINT

V0399 $4.12 1979-1980 Head Dia. 1.720

V0399+15 $8.81 Head Dia. 1.720 .015 OVERSIZE VALVE

V0399+15 $8.81 1975-1978 Head Dia. 1.720 .015 OVERSIZE VALVE EXC. CALIF AND SPRINT

V0399+3 $6.37 1975-1978 Head Dia. 1.720 .003 OVERSIZE VALVE EXC. CALIF AND SPRINT

V0399+3 $6.37 1979-1980 Head Dia. 1.720 .003 OVERSIZE VALVE

V1195 $6.81 1974-1976 Head Dia. 1.940 SPRINT

V1195 $6.81 1978 Head Dia. 1.940 G-2, 3, K-1 & 2 W/CALIF.

Exhaust Valve V1192 $8.32 1974-1976 Head Dia. 1.500 SPRINT

V1206 $20.45 1974-1976 Head Dia. 1.500 SPRINT OPTIONAL (STELLITE)

V1294 $14.20 1975-1980 Head Dia. 1.500 EXC. SPRINT

Continued on Next Page

Page 437.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

76 400 ENG - 1974-80 - 8 Cyl. - 4 1/8 Bore (Continued)

- Exhaust Valve V1646 $45.22 1975-1980 Head Dia. 1.500 OPTIONAL SUPER ALLOY (NICKEL) EXC SPRINT

Valve Springs VS580 $5.37 EXH.

Valve Spring with Hydraulic Lifters VS380 $3.24 STANDARD REPLACEMENT INT.

VS739R $5.10 CHROME VANADIUM INT.

Valve Locks VL200 $1.21 -

Rocker Arms MR842 $6.53 -

Rocker Arm Kit MRK401 $7.00 KIT INCLUDES 1-[MR-842], 1-[MRM-1731] & 1-[MRM-1786]

Rocker Arm Ball MRM1731 $0.80 -

Rocker Arm Nut MRM1786 $0.72 -

Rocker Arm Stud MRDS921 $4.64 .003 O/S

Chain 163 $14.17 58 LINKS

Cam Sprocket S288 $25.20 44 TEETH

Crank Sprocket S289 $11.30 22 TEETH

3pc Timing Set 3-163S $42.71 INCLUDES [163], [S288] & [S289]

Expansion Plug Kits MPE101 $9.37 CARDED, STEEL KIT INCLUDES (10) MPC-41 $0.75 BLOCK, (3) MPC- 95 OIL GALLEY, (1) MPS-78 $0.80 OIL GALLEY, (5) MPP-567 $0.45

MPE101B $24.87 CARDED, BRASS KIT INCLUDES (10) MPC-41-B BLOCK, (3) MPC-95 $0.33 OIL GALLEY, (1) MPC-78 OIL GALLEY, (5) MPP-567 $0.45

MPE101BR $26.84 BAGGED, BRASS KIT INCLUDES (10) MPC-41-B BLOCK, (3) MPC-95 $0.33 OIL GALLEY, (1) MPC-78 OIL GALLEY, (5) MPP-567 $0.45

MPE101R $8.43 BAGGED, STEEL KIT INCLUDES (10) MPC-41 $0.75 BLOCK, (3) MPC- 95 OIL GALLEY, (1) MPC-78 OIL GALLEY, (5) MPP-567 $0.45

77 6.6 (400) OHV DIESEL ENG - 2001-10- V8 - 4.06 Bore (EXPRESS 2500-3500,SIERRA,SILVERADO,SAVANA) (DURAMAX TURBO)

-

Oil Pump M316 $362.42 2001-2006 SIERRA, SILVERADO

M316 $362.42 2006-2007 EXPRESS, SAVANNAH

Mell Lube M10012 $4.93 -

78 6.6-J (403) ENG - 1990-98 - 6 Cyl. (3116) (CATERPILLAR TURBO DIESEL) MEDIUM DUTY

- Mell Lube M10012 $4.93 -

79 401 $101.84 ENG - 1960-65 - V6 - 4 7/8 Bore (GMC ONLY)

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0707 $67.43 Head Dia. 1.825

Valve Locks VL200 $1.21 -

Crank Gear 2843 $13.18 30 TEETH

Idler Gear 2842 $23.62 57 TEETH

Page 438.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

80 401 $101.84 ENG - 1966-72 - V6 - 4 7/8 Bore (CHEVY 1966-71) (GMC 1966-72)

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Crank Gear 2843 $13.18 30 TEETH

Idler Gear 2842 $23.62 57 TEETH

Expansion Plug Kits MPE121 $8.33 CARDED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121B $18.35 CARDED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121BR $15.84 BAGGED, BRASS KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82- B BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

MPE121R $9.03 BAGGED, STEEL KIT INCLUDES (3) MPC-39 $0.49 HEAD, (4) MPC-82 $0.99 BLOCK, (1) MPS-58 $0.62 CAMSHAFT, (2) MPP-568, (4) MPP-554 $0.38

81 400 (402) ENG - 1971-72 - 8 Cyl. - 4 1/8 Bore

- Oil Pump M77G $61.95 -

M77HV $82.51 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP MUST USE IS SHAFT W/STEEL GUIDE

Pump Kit K77G $47.59 EXC. HI VOL

Screen Assy 305S $20.57 FOR USE WITH 8" PANS

Intermediate Shaft IS77 $14.18 HAS STEEL SHAFT GUIDE

IS77A $10.96 USES NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-77A]

Camshaft CCS25 $124.02 HYD.

Camshaft Lifter Kit CLCCS25 $244.73 KIT INCLUDES 1-[CCS-25] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC6 $146.11 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Torque Cam Lifter Kit CLMTC6 $278.09 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1-[MTC-6] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR379 $2.40 INT. 5/16" DIA.

MPR380 $2.27 EXH. 5/16" DIA.

MPR44 $3.80 INT. 3/8" DIA.

MPR44A $3.80 EXH. 3/8" DIA.

Intake Valve V1107 $7.31 Head Dia. 2.065

V1107+3 Head Dia. 2.065 .003 OVERSIZE VALVE

Exhaust Valve V1106 $12.43 Head Dia. 1.720

V1106+15 $9.85 Head Dia. 1.172 .015 OVERSIZE VALVE HIGH ALLOY STEEL

V1261 $17.28 Head Dia. 1.720 OPTIONAL (STELLITE) SAME APPLICATION AS [V1106]

Valve Springs VS330 $5.37 SINGLE SPRING

VS940 $9.81 DUAL SPRINGS

Valve Locks VL300 $1.37 -

Rocker Arms MR867 $8.92 -

Rocker Arm Kit MRK405 $11.65 KIT INCLUDES 1-[MR-867], 1-[MRM-1797] & 1-[MRM-1793]

Rocker Arm Ball MRM1797 $0.97 -

Rocker Arm Nut MRM1793 $0.92 -

Chain 168 $22.18 66 LINKS H.D.

501 $20.59 50 LINKS

Cam Sprocket S392 $9.83 38 TEETH

S394 $19.02 50 TEETH H.D.

Crank Sprocket S393 $5.23 19 TEETH

S395 $11.69 25 TEETH H.D.

3pc Timing Set 3-171S $68.13 INCLUDES [168], [S394] & [S395] H.D.

3-501S $50.69 INCLUDES [501], [S392] & [S393]

Page 439.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

82 409 ENG - 1962-65 - 8 Cyl. - 4 5/16 Bore (CHEVY ONLY)

- Oil Pump M55 $41.17 5/8" SCREEN INLET STANDARD VOLUME

M55HV $55.59 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP (MUST USE IS SHAFT W/STEEL GUIDE) 5/8" SCREEN INLET

Pump Kit K55 $38.10 EXC. HI VOL

Screen Assy 55S $20.54 -

Intermediate Shaft IS55A $11.64 HAS STEEL SHAFT GUIDE

Camshaft CCS4 $254.32 HYD.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 HYD.

Push Rods MPR105 $2.53 EXH.

MPR35AB $3.63 INT.

Chain 162 $10.73 64 LINKS

Crank Sprocket S319 $25.55 24 TEETH

83 7.0 (427) ENG - 1968-98 - 8 Cyl. - 4 1/4 Bore (MEDIUM DUTY)

- Oil Pump M77G $61.95 1968-1990 STANDARD VOLUME HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP

M77HV $82.51 MUST USE IS SHAFT W/STEEL GUIDE

M307 $99.95 1991-1998 STANDARD VOLUME

M307-353S $139.82 1991-1998 INCLUDES SCREEN STANDARD VOLUME FOR 9 1/8" TO 9 1/2" PAN DEPTH

Pump Kit K77G $47.59 1968-1990 EXC. HI VOL

Screen Assy 241S $17.36 FOR 9" PAN DEPTH

305S $20.57 1977-1978 FOR 8" PAN DEPTH

305S $20.57 1983-1985 FOR 8" PAN DEPTH

307S $33.28 1991-1998 FOR 9 1/2" TO 9 7/8" PAN DEPTH. USE WITH M307 $99.95

353S $47.54 1991-1998 FOR 9 1/8" TO 9 1/2 PAN DEPTH.

Intermediate Shaft IS77 $14.18 1976-1998 HAS STEEL SHAFT GUIDE CAN USE IN PLACE OF [IS-77A]

IS77A $10.96 1976 USES NYLON SHAFT GUIDE 2ND DES.

IS77A $10.96 1979-1998 USES NYLON SHAFT GUIDE

IS77B $14.12 1968-1972 HAS STEEL SHAFT GUIDE

IS77B $14.12 1973-1978 HAS STEEL SHAFT GUIDE 6000/6500

Nylon Shaft Guide M55005 $1.18 USE W/[IS-77A]

Camshaft CCS20 $123.83 1969-1972 HYD.

CCS21 $175.32 1968 GEAR DRIVE HYD.

CCS25 $124.02 1985-1998 HYD.

CCS31 $133.35 1973-1984 HYD.

Camshaft Lifter Kit CLCCS20 $238.37 1969-1972 KIT INCLUDES 1-[CCS-20] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

CLCCS21 $177.33 1968 KIT INCLUDES 1-[CCS-21] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE GEAR DRIVEN

CLCCS25 $244.73 1985-1990 KIT INCLUDES 1-[CCS-25] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Continued on Next Page

Page 440.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

83 7.0 (427) ENG - 1968-98 - 8 Cyl. - 4 1/4 Bore (MEDIUM DUTY) (Continued)

- Camshaft Lifter Kit CLCCS31 $264.94 1973-1984 KIT INCLUDES 1-[CCS-31] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC6 $146.11 1969-1990 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Torque Cam Lifter Kit CLMTC6 $278.09 1969-1990 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1- [MTC-6] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Mell Lube M10012 $4.93 -

Lifters JB817 $5.68 1968-1990 HYD.

JB969 $6.81 1991-1998 HYD.

Push Rods MPR103B $2.50 1977-1990 INT.

MPR335A $4.15 1977-1990 EXH.

MPR45 $7.49 1968-1976 INT.

MPR45A $18.95 1968-1976 EXH.

MPR463 $3.48 1991-1996 INT.

MPR464 $3.63 1991-1996 EXH.

Intake Valve V0997 $10.35 1974-1984 Head Dia. 1.840

V0997 $10.35 1985-1988 Head Dia. 1.840 W/O H.D. EMISSIONS

Exhaust Valve V0996 $20.57 Head Dia. 1.660 STELLITE

V1235 $45.74 Head Dia. 1.660 SUPER ALLOY (NICKEL)

Valve Springs VS1040 $6.57 1968-1985

VS1330 $7.08 1986-1993

VS1330 $7.08 1994 1ST DES. W/DAMPER

Valve Locks VL300 $1.37 -

Rocker Arms MR867 $8.92 1968-1990

Rocker Arm Kit MRK405 $11.65 KIT INCLUDES 1-[MR-867], 1-[MRM-1797] & 1-[MRM-1793]

Rocker Arm Ball MRM1797 $0.97 1968-1990

Rocker Arm Nut MRM1793 $0.92 1968-1990

Chain 168 $22.18 1969-1990 66 LINKS

4SR50 $26.87 1991-1998 50 LINKS

Cam Sprocket S394 $19.02 1969-1990 50 TEETH

S710 $34.81 1991-1998 38 TEETH

Crank Sprocket S395 $11.69 1969-1990 25 TEETH

S717 $38.05 1991-1998 19 TEETH

3pc Timing Set 3-171S $68.13 1969-1990 INCLUDES [168], [S394] & [S395]

3-4SR50 $84.21 1991-1998 INCLUDES [4SR50], [S710] & [S717]

Expansion Plug Kits MPE102 $10.84 1980-1990 CARDED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102B $32.83 1980-1990 CARDED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102BR $28.56 1980-1990 BAGGED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102R $9.00 1980-1990 BAGGED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE275 $9.40 1991-1998 CARDED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275B $19.04 1991-1998 CARDED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275BR $20.45 1991-1998 BAGGED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275R $10.45 1991-1998 BAGGED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

Page 441.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

84 7.2-C (441) ENG - 1998-09 - 6 Cyl. (DESG 3126, C7) (CATERPILLAR TURBO DIESEL) MEDIUM DUTY

-

Mell Lube M10012 $4.93 -

85 432 & 432M ENG - 1973-74 - V6 - 4 7/8 Bore (432 CHEVY ONLY) (432M CHEVY & GMC)

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V1254 $86.79 Head Dia. 1.913

Valve Locks VL200 $1.21 -

Crank Gear 2843 $13.18 30 TEETH

Idler Gear 2842 $23.62 57 TEETH

Page 442.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

86 7.4 (454) ENG - 1971-00 - 8 Cyl. - 4.25 Bore (CHEVY 1973-99) (GMC 1971-00) VIN CODE "Z" 1971-75, "Y" 1975-78, "S" 1978-80, "W" 1980-90, "N" 1987-97 "J" 1996-00, "B" 1998-00, "D" 1999-00

-

Oil Pump M77G $61.95 1972-1990 STANDARD VOLUME

M77HV $82.51 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP MUST USE IS SHAFT W/STEEL GUIDE

M307 $99.95 1991-2000 STANDARD VOLUME

M307-353S $139.82 1991-2000 INCLUDES SCREEN STANDARD VOLUME FOR 9 1/8" TO 9 1/2" PAN DEPTH

Pump Kit K77G $47.59 1972-1990 EXC. HI VOL

Screen Assy 241S $17.36 1977-2000 EXC. 1977-83 P3 & 1985 P3 W/OUT STAINLESS STEEL EXH. FOR 9" PAN DEPTH

305S $20.57 1972-1976 FOR 8" PAN DEPTH

305S $20.57 1977-1983 P3 EXC. MOTOR HOME. FOR 8" PAN DEPTH

305S $20.57 1985 P3 W/OUT STAINLESS STEEL EXH. FOR 8" PAN DEPTH

307S $33.28 1991-2000 FOR 9 1/2" TO 9 7/8" PAN DEPTH. USE WITH M307 $99.95

353S $47.54 1991-2000 FOR 9 1/8" TO 9 1/2 PAN DEPTH.

Intermediate Shaft IS77 $14.18 HAS STEEL SHAFT GUIDE

IS77A $10.96 USES NYLON SHAFT GUIDE

Nylon Shaft Guide M55005 $1.18 USE W/[IS-77A]

Camshaft CCS22 $141.38 1973-1975 HYD.

CCS22 $141.38 1979-1980 70 SERIES. HYD.

CCS25 $124.02 1976-1993 EXCLUDES 1979-80 70 SERIES. HYD.

MC1291 $236.78 1994-1995

MC1316 $478.57 1996-2000 HYD ROLLER

Camshaft Lifter Kit CLCCS22 $218.72 1973-1980 KIT INCLUDES 1-[CCS-22] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE 1973-75 ALL & 1979-80 70 SERIES HYD.

CLCCS25 $244.73 1976-1993 KIT INCLUDES 1-[CCS-25] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE EXC. 1979-80 70 SERIES HYD.

CLMC1316 $594.45 1996-2000 KIT INCLUDES 1-[MC1316] CAM, 16-[JB-7003] LIFTERS & 4OZ MELL LUBE

Torque Camshaft MTC6 $146.11 1971-1990 NOT CALIFORNIA COMPLIANT. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Torque Cam Lifter Kit CLMTC6 $278.09 1971-1990 NOT CALIFORNIA COMPLIANT. KIT INCLUDES 1- [MTC-6] CAM, 16-[JB-817] LIFTERS & 4OZ MELL LUBE. CLASS I HYD. NOT COMPUTER COMPATIBLE. IMPROVES LOW-HI PERF. CHECK FOR COIL BIND. USE [VS-320] SPRING W/INSTALLED HGT. OF 1.90. CAM LIFT .270 INT. .270 EXH.

Mell Lube M10012 $4.93 -

Lifters JB7003 $15.84 1996-2000 HYD. ROLLER HYD. ROLLER VIN CODES "J" & "B"

JB817 $5.68 1971-1990 HYD.

JB969 $6.81 1991-1997 HYD. EXC. VIN CODES "J" & "B" N.A. ROLLERS

Push Rods MPR103B $2.50 MPR-103-B $2.56 1979-1980 INT. SERIES 70

MPR335A $4.15 1979-1980 EXH. SERIES 70

MPR379 $2.40 1973-1990 INT. 5/16" DIA.- EXC. SERIES 70

MPR380 $2.27 1973-1990 EXH. 5/16" DIA.- EXC. SERIES 70

MPR44 $3.80 1971-1972 SPRINT INT. 3/8" DIA.

MPR44 $3.80 1973-1974 INT. 3/8" DIA.

MPR44A $3.80 1971-1972 SPRINT EXH. 3/8" DIA.

MPR44A $3.80 1973-1974 EXH. 3/8" DIA.

MPR454 $2.35 1991-1997 EXHAUST VIN CODE "N"

MPR460 $2.46 1991-1997 INTAKE VIN CODE "N"

MPR498 $3.47 1998-2000 INTAKE VIN CODE "J"

MPR499 $3.47 1998-2000 EXHAUST VIN CODE "J"

MPR-602 $4.04 1996-1997 EXHAUST VIN CODE "J"

MPR603 $3.72 1996-1997 INTAKE VIN CODE "J"

Intake Valve V0997 $10.35 1979-1980 Head Dia. 1.840 SERIES 50-60

V1107 $7.31 Head Dia. 2.065 1971-00 ALL EXC. 1971 SPRINT W/SPECIAL HI PERF. ENG. & EXC. 1979-80 SERIES 50-60

V1107+3 1971-2000 Head Dia. 2.065 .003 OVERSIZE VALVE EXC. 1971 SPRINT W/SPECIAL HP ENG., EXC. 1979-80 SERIES 50-60

Exhaust Valve V1106 $12.43 1971-1984 Head Dia. 1.720 EXC. 1971 SPRINT W/SPECIAL HI

V1106+15 $9.85 1971-1984 Head Dia. 1.172 .015 OVERSIZE VALVE HIGH ALLOY STEEL EXC. 1971 SPRINT W/SPECIAL HI PERF ENG.

V1261 $17.28 1973-1984 Head Dia. 1.720 OPTIONAL (STELLITE) FOR [V1106] EXC. 1971 SPRINT W/SPECIAL HI. PERF. ENG.

V1261 $17.28 1985 Head Dia. 1.720 W/CAST IRON EXHAUST MANIFOLD

V1261 $17.28 1986-1997 Head Dia. 1.720

V1578 $53.18 1985 Head Dia. 1.720 W/STAINLESS EXHAUST MANIFOLD

Valve Springs VS1040 $6.57 1975-1984

VS1040 $6.57 1985 W/H4D EMISSION CONTROL (CAST IRON MANIFOLD)

VS1330 $7.08 1985-1993 EXCLUDES H4D EMISSION CONTROL (CAST IRON MANIFOLD)

VS1330 $7.08 1994 1ST DESIGN W/DAMPER

VS2259 $6.55 1996-2000 INTAKE AND EXHAUST

VS740 $7.84 1973-1974

Valve Locks VL300 $1.37 -

Rocker Arms MR867 $8.92 1973-1990

MR928 $11.86 1991-2000

Continued on Next Page

Page 443.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

86 7.4 (454) ENG - 1971-00 - 8 Cyl. - 4.25 Bore (CHEVY 1973-99) (GMC 1971-00) VIN CODE "Z" 1971-75, "Y" 1975-78, "S" 1978-80, "W" 1980-90, "N" 1987-97 "J" 1996-00, "B" 1998-00, "D" 1999-00 (Continued)

-

Rocker Arm Kit MRK405 $11.65 1973-1990 KIT INCLUDES 1-[MR-867], 1-[MRM-1797] & 1-[MRM- 1793]

MRK653 $18.89 1991-2000 KIT INCLUDES 1-[MR-928], 1 BALL & 1 BOLT

Rocker Arm Ball MRM1797 $0.97 1973-1990

MRM1804 $2.13 1991-2000

Rocker Arm Nut MRM1793 $0.92 1973-1990

Chain 168 $22.18 1971-1997 66 LINKS H.D.

4SR50 $26.87 1996-2000 50 LINKS VIN CODE B,D,J

501 $20.59 1971-1987 50 LINKS

507 $28.15 1988-1996 50 LINKS EXCLUDING 1996 VIN J

Cam Sprocket S392 $9.83 1971-1995 38 TEETH

S394 $19.02 50 TEETH H.D.

S806 $39.54 1996-1999 38 TEETH VIN CODE J (1999 W/PULL AHEAD DESIGN)

S830 $20.61 1998-2000 38 TEETH VIN CODES B,D,J (VIN J 1999 W/O ZK3 PULL AHEAD DESIGN)

Crank Sprocket S393 $5.23 1971-1995 19 TEETH 25 TEETH H.D.

S395 $11.69 1999-2000 19 TEETH VIN CODE J (W/OUT

S815 $18.94 1999 PULL AHEAD DESIGN)

S831 $34.81 1996-1999 19 TEETH VIN CODE J (1999 W/PULL AHEAD DESIGN)

3pc Timing Set 3-171S $68.13 1971-1997 INCLUDES [168], [S394] & [S395] H.D.

3-4SR50SA $84.13 1996-1999 INCLUDES [4SR50], [S831], [S806] VIN CODE J (1999 W/PULL AHEAD DESIGN)

3-4SR50SE $71.34 1999-2000 INCLUDES [4SR50], [S830], [S815] VIN CODE J (W/OUT 1999 PULL AHEAD DESIGN)

3-501S $50.69 1971-1987 INCLUDES [501], [S392] & [S393]

3-507S $53.89 1988-1995 INCLUDES [507], [S392] & [S393]

Expansion Plug Kits MPE102 $10.84 1971-1990 CARDED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102B $32.83 1971-1990 CARDED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102BR $28.56 1971-1990 BAGGED, BRASS KIT INCLUDES (8) MPC-82-B BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE102R $9.00 1971-1990 BAGGED, STEEL KIT INCLUDES (8) MPC-82 $0.99 BLOCK, (1) MPS-154 $0.99 OIL GALLEY, (7) MPP-567 $0.45

MPE275 $9.40 1991-2000 CARDED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275B $19.04 1991-2000 CARDED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275BR $20.45 1991-2000 BAGGED, BRASS KIT INCLUDES (6) MPC-41-B, (1) MPS-154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

MPE275R $10.45 1991-2000 BAGGED, STEEL KIT INCLUDES (6) MPC-41, (1) MPS- 154, (5) MPP-554, (10) MPP-567, (3) MPP-638 $0.38

87 7.4-D (454) OHV ENG - 1999-00 - 8 Cyl. - 4.25 Bore (B-SERIES, C-SERIES, SCHOOL BUS) (VORTEC GAS) MEDIUM DUTY

-

Mell Lube M10012 $4.93 -

Page 444.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

88 478,478M ENG - 1962-74 - V6 - 5 1/8 Bore (478 1962-65) (478M 1966-74)

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70 $12.70 -

Mell Lube M10012 $4.93 -

Lifters JB874 $25.22 MECH.

Push Rods MPR121 $9.21 -

Exhaust Valve V0707 $67.43 1962-1965 Head Dia. 1.825 478

V1254 $86.79 1966-1974 Head Dia. 1.913 478M

Valve Locks VL200 $1.21 -

Crank Gear 2843 $13.18 30 TEETH

Idler Gear 2842 $23.62 57 TEETH

89 D478,DH478 DIESEL ENG - 1965-74 - V6 - 5 1/8 Bore

- Oil Pump M70C $84.16 3/8" MOUNTING HOLES, DOES NOT INCLUDE GOVERNOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE

M70CHV $218.81 HI VOL PUMP - 25% ADD'L VOL OF OIL THAN STOCK PUMP. W/3/8" MOUNTING HOLES. DOES NOT INCLUDE GOVENOR SPINNER. USE SPINNER FROM OLD PUMP IF APPLICABLE.

Intermediate Shaft IS70E $14.44 -

Mell Lube M10012 $4.93 -

Valve Locks VL200 $1.21 -

Crank Gear 2847 $44.50 34 TEETH

90 7.8-3,B (475) ENG - 1999-09 - 6 Cyl. (T-SERIES, C6500,C7500) (ISUZU TURBO DIESEL) MEDIUM DUTY

-

Mell Lube M10012 $4.93 -

91 8.1-G (496) OHV ENG - 2001-07 - V8 - 4.25 Bore (VORTEC)

- Oil Pump M77HV $82.51 HI VOL PUMP-25% ADDL VOL OF OIL THAN STOCK PUMP

M307-307S $146.15 INCLUDES SCREEN STANDARD VOLUME (FOR 9 1/2" TO 9 7/8" PAN DEPTH)

M307-353S $139.82 INCLUDES SCREEN STANDARD VOLUME FOR 9 1/8" TO 9 1/2" PAN DEPTH

Screen Assy 241S $17.36 FOR 9" PAN DEPTH.

305S $20.57 FOR 8" PAN DEPTH.

307S $33.28 FOR 9 1/2" TO 9 7/8" PAN DEPTH

353S $47.54 FOR 9 1/8" TO 9 1/2 PAN DEPTH.

Intermediate Shaft IS77 $14.18 HAS STEEL SHAFT GUIDE

IS77A $10.96 USES NYLON SHAFT GUIDE

Camshaft MC1382 $548.41 HYD.

Mell Lube M10012 $4.93 -

Lifters JB7003 $15.84 HYD. ROLLER

Push Rods MPR638 $3.69 INTAKE

MPR639 $3.69 EXHAUST

Intake Valve V2101 $9.26 Head Dia. 2.187

Exhaust Valve V2126 $58.57 Head Dia. 1.720

Valve Springs VS2255 $6.06 -

Valve Locks VL300 $1.37 -

Rocker Arms MR954 $11.38 -

Chain 4SR50 $26.87 50 LINKS

Cam Sprocket S834 $22.10 2001 38 TEETH

S842 $36.47 2002-2003 38 TEETH

S892 $47.57 2004-2007 38 TEETH

Crank Sprocket S837 $30.04 19 TEETH

3pc Timing Set 3-4SR50SB $119.19 2001 INCLUDES [4SR50], [S834] & [S837]

3-4SR50SC $92.00 2002-2003 INCLUDES [4SR50], [S842] & [S837]

3-4SR50SD $96.88 2004-2007 INCLUDES [4SR50], [S892] & [S837]

Page 445.
GMC/CHEVY TRUCKS (Continued)

Line Part Title Part No Description

92 637 ENG - 1970-72 - 8 Cyl. - 5 1/8 Bore

- Intermediate Shaft IS70E $14.44 -

Mell Lube M10012 $4.93 -

Crank Gear 2847 $44.50 34 TEETH

Idler Gear 2845 $52.94 51 TEETH

93 D637,DH637 ENG - 1966-72 - 8 Cyl. - 5 1/8 Bore

- Intermediate Shaft IS70E $14.44 -

Mell Lube M10012 $4.93 -

Push Rods MPR47 $1.52 -

94 702. ENG - 1960-65 - 12 Cyl - 4 9/16 Bore (GMC ONLY)

- Mell Lube M10012 $4.93 -

Exhaust Valve V0707 $67.43 Head Dia. 1.825

Valve Locks VL200 $1.21 -

Crank Gear 2843 $13.18 30 TEETH

Idler Gear 2842 $23.62 57 TEETH

95 8.1-E,G (496) OHV ENG - 2001-09 - 8 Cyl. - 4.25 Bore (C-SERIES, SCHOOL BUS) (VORTEC GAS) MEDIUM DUTY

-

Mell Lube M10012 $4.93 -

96 8.2-F,G (501) ENG - 1980-91 - 8 Cyl. (B60,B6000,C60,C70,C6000,C7000,SCHOOL BUS) (DETROIT DIESEL ENG) MEDIUM DUTY

-

Mell Lube M10012 $4.93 -

Top of Page

HOME

Engine Rebuild & Assembly	Balancing & Blueprinting	Cylinder Heads
Engine Rebuild Kits	Engine Start-up	Other Related Web Sites Page 1
Crankshafts	Degree Cam	Other Related Web Sites Page 2
Purchase warranty & Return Information	About the owner of RPM	Frequently Asked Questions
MASTER ENGINE REBUILD KITS & PARTS

ACURA	ALFA ROMEO
ALLIS CHALMERS LIFT TRUCK	ALLIS CHALMERS TRACTOR
AMERICAN MOTORS	AUDI
AUSTIN	BMW
BUICK 1.6Lto 3.0L	BUICK 3.1L to 455 cu. in.
CADILLAC	CASE TRACTOR
CATERPILLAR	CHEVROLET 1.0L to 230cu. in.
CHEVROLET 231c.i. to 454c.i.	CHRYSLER INDUSSTRIAL
CHRYSLER	CONTINENTAL
CUMMINS	DAEWOO
DAIHATSU	DESOTO
DETROIT DIESEL	DODGE
DODGE TRUCK	EAGLE
FIAT	FORD Model A & B to Model T
FORD 1.3L to 312 cu. in.	FORD 5.4L thru 460. cu. in.
FORD INDUSTRIAL	FORD TRACTOR
FORD TRUCK	GMC/CHEVY TRUCKS
HENRY-J	HERCULES
HONDA	HUMMER
HYUNDAI	I.H.C. TRACTOR & POWER UNITS
I.H.C. TRUCK	INFINITI
ISUZU	JAGUAR
JEEP	JOHN DEERE TRACKTOR
KAISER	KIA
LEXUS	MAZDA
MERCEDES BENZ	MERCURY (INC. LINCOLN)
MG	MINNEAPOLIS MOLINE
MITSUBISHI	NISSAN/ DATSUN
NISSAN INDUSTRIAL	OLDSMOBILE
OLIVER TRACTOR	OPEL
PERKINS	PEUGEOT
PLYMOUTH	PONTIAC
PORSCHE	RENAULT
ROVER	SAAB
SATURN	STUDEBAKER
SUBARU	SUZUKI
TOYOTA	TRIUMPH
VOLKSWAGEN	VOLVO
WAUKESHA	WHITE PDQ TRUCKS
WHITE TRUCK	WISCONSIN

Engine	Year	Line#
Engine	Year	Line#
4 Cyl.
1.6-6 1588CC SOHC	1994-00	1
1.6-U (98) SOHC	1989-95	2
1.8 (111) OHC	1972-75	3
1.8 (111) OHC	1976-82	4
1.9-A (119) OHC	1982-85	5
2.0-C (122) DOHC	1999-03	6
2.0-Y (122) OHV	1983-84	7
2.2 DIESEL	1981-83	8
2.2-4,5,H (134) OHV	1994-03	9
2.2-S DIESEL	1984-85	10
6 Cyl.
145	1961-63	11
2.5-4 2500CC DOHC	2001-04	12
4 Cyl.
2.5-A (151) OHV	1991-93	13
2.5-E (151) OHV	1985-91	14
153 (OHV)	1963-65	15
6 Cyl.
164	1964-65	16
4 Cyl.
2.8-8 (169) DOHC	2004-06	17
V6
2.8-B & R (173)	1982-93	18
6 Cyl.
194. (OHV)	1963-66	19
V6
200 (OHV)	1978-79	20
6 Cyl.
3.4-F (207) OHV	2005-09	21
5 Cyl.
3.5-6 (211) DOHC	2004-06	22
6 Cyl.
216	1942-53	23
V6
229 (OHV)	1980-84	24
6 Cyl.
230 (OHV)	1963-69	25
V6
231 (OHV)	1978-84	26
6 Cyl.
235	1941-62	27
248	1939-55	28
250	1966-84	29
4.2-S (256) DOHC	2002-09	30
261	1954-62	31

Line	Part Title	Part No	Description
1	1.6-6 1588CC SOHC ENG - 1994-00 - 4 Cyl. - 2.96 Bore (GEO TRACKER--SUZUKI ENG. M.F.I.)
-	Oil Pump	M169 $123.92	1994-1995
	Oil Pump	M238 $117.56	1996-2000
	Mell Lube	M10012 $4.93	-
	Belt	B0164 $14.15	1994 95 TEETH EXC. CALIF. EMISSIONS
		B0164 $14.15	1995 95 TEETH 2WD EXC. CALIF. EMISSION
		B0212 $17.93	1996-1998 103 TEETH