Ford
| Piston kits, 4340 steel connecting rods, Stainless Steel Valves, Spring/Retainer Kits |
RPM - RON'S PRECISION MACHINE, INC.
69 E. 580 N.
Santaquin, Utah 84655
|
Call Toll Free to Order and Purchase Parts at: 1-866-700-5877
(U.S. only) Or 801-754-5338 OR Contact us anytime OR use your e-mail program and type in ron@rpmrons.com to send an e-mail with what you need. OR Order Form to check stock & prices |
Don't forget to save this site.
|
Hours: 9:00 AM to 5:00 PM Monday - Friday mountain time (Utah) Call toll free to purchase at: 1-866-700-5877 (U.S. only) |
| Engine Rebuild Kit and Parts Online Catalog. |
XR6 BA FALCON 4.0L
|
XR-6 - PLATINUM SERIES LIGHTWEIGHT PISTON KITS Manley pistons are machined of high strength 2618 material. Each design is lightweight yet robust enough to deliver long service life. Offset wrist pin design is utilized for quiet start-ups. Perfect ring groove to skirt squareness is achieved through our unique "one fixturing" manufacturing method that assures maximum horsepower. All pistons come with moly coated skirts. Round wire locks, premium chrome moly wrist pins, and premium steel top ring sets from Total Seal are included with every kit at no additional charge. Recommended clearance: .0030" measured .850" from the bottom of the oil ring groove. |
|
Part # Your Cost |
Extreme Duty Part # Your Cost |
Bore Size (mm) |
Over Size |
Rod Length |
Stroke |
Comp. Dist. |
Dome Vol. (cc) |
Cyl. Head (cc) |
Comp. Ratio |
Piston Type |
Piston Wt / Gms |
Included Ring Set |
| Turbo 4.0L BA Falcon | ||||||||||||
| 628000C-6 $1,043.86 | 628000CE-6 $1,235.17 | 3.633" | STD | 6.058" | 3.910" | 1.215" | -16 | 66 | 8.5:1 | Dish | 382 | 46923-6 $226.92 |
| 628004C-6 $1,043.86 | 628004CE-6 $1,235.17 | 3.637" | +.004" | 6.058" | 3.910" | 1.215" | -16 | 66 | 8.5:1 | Dish | 385 | 46924-6 $226.92 |
| 628014C-6 $1,043.86 | 628014CE-6 $1,235.17 | 3.647" | +.014" | 6.058" | 3.910" | 1.215" | -16 | 66 | 8.5:1 | Dish | 389 | 46926-6 $226.92 |
| 628100C-6 $1,043.86 | 628100CE-6 $1,235.17 | 3.633" | STD | 6.058" | 3.910" | 1.215" | -10 | 66 | 9.0:1 | Dish | 384 | 46923-6 $226.92 |
| 628104C-6 $1,043.86 | 628104CE-6 $1,235.17 | 3.637" | +.004" | 6.058" | 3.910" | 1.215" | -10 | 66 | 9.0:1 | Dish | 388 | 46924-6 $226.92 |
| 628114C-6 $1,043.86 | 628114CE-6 $1,235.17 | 3.647" | +.014" | 6.058" | 3.910" | 1.215" | -10 | 66 | 9.0:1 | Dish | 393 | 46926-6 $226.92 |
|
XR-6 - ECONOMICAL "H" BEAM STEEL CONNECTING RODS Manley "H" Beam connecting rods are manufactured from 4340 forgings to the same exacting standards developed and approved by our original equipment customers. There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. Cap fasteners are 7/16" ARP 8740 for the "H" Beam and 7/16" ARP 2000 for the H-Plus. |
|
Part # Your Cost |
Center to Center |
Big End Bore | Big End Width | Pin Diameter | Pin Bore | Gram Weight |
| BA Falcon XR6 Turbo 4.0L | ||||||
| 14017-6 $797.09 | 6.058" | 2.239" | .990" | .866" (22mm) | .8671" | 640 |
| 14017R-6 $838.34 (H-Plus) | 6.058" | 2.239" | .990" | .866" (22mm) | .8671" | 640 |
|
Manley Pro Series connecting rods are forged from aircraft quality 4340 vacuum degassed material. Each rod is fully machined in the Manley Lakewood, NJ factory to the highest standards. Our signature "Turbo Tuff" design combines the appropriate weight and rugged strength for ultimate horsepower applications. Each rod is shot peened after machining and magnafluxed. Bores are round and without taper. Bend and twist is tightly controlled. Cap fasteners are 7/16" APR 2000 cap screws. These rods are also available with ARP 625+ fasteners. To order, affix an "R6" to the part number. |
|
Part # Your Cost |
Center to Center |
Big End Bore | Big End Width | Pin Diameter | Pin Bore | Gram Weight |
| BA Falcon XR6 Turbo 4.0L | ||||||
| 14427-6 $1,535.64 | 6.058" | 2.239" | .990" | .866" (22mm) | .8671" | 695 |
FORD DURATEC 2.0L DOHC
|
DURATEC - ECONOMICAL "H" BEAM STEEL CONNECTING
RODS Manley "H" Beam connecting rods are manufactured from 4340 forgings to the same exacting standards developed and approved by our original equipment customers. There is a vast difference in quality between a Manley "H" Beam and the "other" inexpensive H-Beams on the market. Weight matched to +/- 1.5 grams. Perfectly round big and small ends. Bend and twist is tightly controlled. Cap fasteners are 3/8" ARP 2000. |
|
Part # Your Cost |
Center to Center |
Big End Bore | Big End Width | Pin Diameter | Pin Bore | Gram Weight |
| Duratec 2.0L DOHC | ||||||
| 14001-4 $0.00 | 5.758" | 1.970" | .859" | .827" (21mm) | .8281" | 546 |
